How to stop squeaky cycle brakes! Bicycle brake restoration and maintenance

Рет қаралды 14,756

Күн бұрын

It's a wonderful day for bicycle brakes!
A courier's bicycle was delivered to our bicycle workshop. As you understand, the bicycle courier rides every day and in any weather, even in rain and snow.)
But when you ride in wet weather, your bike begins to wear out faster and squeak a lot.
The first thing that wears out on your bike is the brakes.
The bicycle begins to squeak a lot and brakes very weakly.
A bicycle must be taken care of, especially the brakes. Don't forget, the brakes on your bike are for your safety!
In this helpful video tutorial, I'll show you how to stop squeaky cycle brakes.
I'll teach you how to properly wash your bike, change brake pads, and adjust your brakes.
Enjoy watching my dear cycling viewers!
00:00 How to fix squeaky brakes on your bicycle.
00:18 Bicycle brakes stopped working.
00:44 How to remove pads from bicycle disc brakes.
01:34 What worn bicycle brake pads look like.
02:18 How to properly wash bicycle brakes.
03:16 High-quality bicycle brake caliper washing.
04:25 How to degrease bicycle brake discs.
05:07 Installation of bicycle disc brake pads.
09:26 How to remove air from a bicycle brake system.
Thank you for your comment! ❤️❤️❤️
Share this video with your friends,
it will help the development of the channel! 📈😘

Пікірлер: 41

@NiceBikeService 2 ай бұрын

❤ If you liked this video, 🙏 share this video with your friends 📈 it will help the development of the channel! ❓ ask your questions

@frankkudelsko1561 2 ай бұрын

Very informative. I didn't know about the blowtorch technique for removing the oil film on the brake disc. Thank you for this excellent video.

@NiceBikeService 2 ай бұрын

thank you for your comment! Share my videos with your friends, it will help the development of the channel! 😘

@anka2866 2 ай бұрын

Super film. Dokładnie pokazuje co i jak. THX 😄👍

@NiceBikeService 2 ай бұрын

dziękuję za komentarz! Podziel się moimi filmami ze znajomymi, to pomoże w rozwoju kanału! 😘

@anka2866 2 ай бұрын

@@NiceBikeService Robię to 😁

@blackIwaterIpark 2 ай бұрын

Ludzie nie dbają o swoje rowery... Good work. 👍

@NiceBikeService 2 ай бұрын

glad to be of service! thanks for your feedback 😘

@glen3509 2 ай бұрын

Does this work for Jegwire V-Brake pads😁

@charlesmansplaining 2 ай бұрын

If it's cold and wet there is nothing you can do. The cleanest setup is still going to squeal.

@NiceBikeService 2 ай бұрын

You're right, hydraulic brakes don't like bad weather. For cold and rain, it is better to use mechanical brakes, as they are cheaper to maintain.

@alexandretogbe367 2 ай бұрын

Excellente vidéo. Je voudrais savoir pourquoi vous réchauffer le disque de frein ?

@NiceBikeService 2 ай бұрын

Je vous remercie pour votre commentaire. Brûlez le disque pour éliminer la graisse et la saleté dans les trous du disque.

@tomjoad1363 2 ай бұрын

@@NiceBikeService I was thinking of using a automobile brak cleaner spray. What is your opinion on it ?

@eduardonty5183 2 ай бұрын

El golpe con martillo en el tapon de la maneta para que es ? Gracias

@salviclash9335 2 ай бұрын

Hola, normalmente. Es porque cuando los tornillos que se se encuentran expuestos a las inclemencias del tiempo y otros factores, como puede ser humedad, sol, sudor... etc. Se suelen quedar "pegados" por el óxido o por el polvo. De esta forma con unos ligeros golpes "rompes" ese óxido. Y haces que salga mas facil y así no dañas la cabeza del tornillo que puede llegar a barrerse

@eduardonty5183 2 ай бұрын

@@salviclash9335 gracias

@alonsorivas8648 2 ай бұрын

Un mes más de uso y frenaba con los pistones 😂

@druiz127 2 ай бұрын

What’s in the first spray bottle if you don’t mind?

@dannydu_jardin1923 2 ай бұрын

Must be degreaser

@HerveBruyere 2 ай бұрын

Why knocking the bleed screw with a hammer?

@NiceBikeService 2 ай бұрын

Tap the screw a little with hammers to make it easier to unscrew

@srjnrwyn 2 ай бұрын

el freno 🎻🎻🎻🎻🎻 😂😂😂😂

@Good_cyclist 2 ай бұрын

For such a bicycle, you need to install ceramic brake pads

@NiceBikeService 2 ай бұрын

thanks for the advice ! 😘

@tomjoad1363 2 ай бұрын

The special tool to push back the piston of the brake caliper is it the same tool to remove the tyres when changing the tube ?

@NiceBikeService Ай бұрын

Yes, that's right. They are very convenient for pushing the pistons apart, and it is better to use plastic ones so as not to damage the brakes

@tomjoad1363 Ай бұрын

@@NiceBikeService Thank you !

@Lucky_Jesus 2 ай бұрын

Цікаво що з ним сталося, що він в такому стані 😁😁

@NiceBikeService 2 ай бұрын

доставка їжі)))

@user-ed3gu3fb7r 2 ай бұрын

Вау💪

@NiceBikeService 2 ай бұрын

😸😸😸

@F_youtube_rassist_cencure 2 ай бұрын

I would be ashamed to take such a dirty bike to a mechanic

@NiceBikeService 2 ай бұрын

If the customer is paying for bike maintenance, why not)

@velobike7 2 ай бұрын

1)Hello, why hit the handle with a hammer? 2)Why didn't they remove the rotary? on the other hand, it’s bad to wash from the side of the knitting needles 3) it was necessary to disassemble the caliper, rubber pistons @@NiceBikeService

@o78rus91 Ай бұрын

Клиент хрюндель😂