Today, we'll take apart one of the most exotic knives I've handled, the WinterBlade Production Factor pocketknife, and swap the 'trigger' backspacer for a fixed spacer from WinterBlade.
Пікірлер: 63
@elizabethtomkelley49762 жыл бұрын
Love that reverberating ring when it opens. That makes this knife so awesome. I now want all my knives to have a musical tone. Ideally, I could play a song if I had them tuned properly. Like hand bells, but knives.
@profesorEDC4 ай бұрын
Has to go back and check your video again in order to put mine together😂 thanks Nicolás
@MiguelEDC8 ай бұрын
This is pretty cool to see, thank you for sharing! 💯🔥🙌🏼
@dfailsthemost5 ай бұрын
I love this knife. I will likely never even hold one. But I love it.
@Muscovy72 жыл бұрын
The M1 Garand Knife! PING!!!
@twiceborn_by_grace Жыл бұрын
I haven’t really been watching much EDC/knife content and I forgot hot funny/cool guy you are. 😂
@jfriedman52742 жыл бұрын
I'm so glad someone finally disassembled the damn thing thank you nick! I've been dying to see the inside of this thing just to see how far outside the box the design truly was and it's on another level of engineering and design very impressive to say the least!
@davidquesada50872 жыл бұрын
That looks really good, and honestly that ringing when you open it… my inner child can’t help to imagine it is some sort of sword being deployed
@Gunner19532 жыл бұрын
Great job! Hope to get one next week. Thanks for the demonstration!👍🏻
@rockspydre2 жыл бұрын
Love that "SCHWING!" when the blade opens!
@jpolhamus712 жыл бұрын
Best sounding acoustics of any knife made to date!!!
@tomj00082 жыл бұрын
Ohhh thank you! Had hoped you'd get one to review! So much! Very appreciative here! Got my alarm set, and hope to get one of the first 200 pieces!
@michaelvoorhees59782 жыл бұрын
Did you?
@regan.80772 жыл бұрын
I'm so exited to get this in hand.
@IlliniDog012 жыл бұрын
Such a cool design. I must have one.
@sztaylor892 жыл бұрын
Winterblade co put out a disassembly video last week. He likes to slide the scale back on to keep the lock and washer in place to avoid them getting pulled into the magnets.
@paullambert4445 Жыл бұрын
What an amazing new way to approach a pocket knife. Really cool idea. Magnets are showing up all over the place. Wow! Perhaps the blade is proud to one side because of the magnet. 🎃
@maxwellvannus69062 жыл бұрын
kool vidio cant already bought one cant freaking wait .
@HDRoofer2 жыл бұрын
I'm going to start the Winterblade Co. Barbershop quartet and use the knife to find our notes. I swear that's perfect A.
@MrSabram07 Жыл бұрын
I use sponge tipped q-tips and put a drop of oil on them to paint my oil on my knives, and my guns also. It's way easier to control and put oil at exact locations
@dandeetorregosa41852 жыл бұрын
The ping sound when you open the knife is addicting
@lord.needham2 жыл бұрын
I need more ting in my life. Hope I get a spot on the Pre order.
@michaelvoorhees59782 жыл бұрын
Did you?
@lambdalandis2 жыл бұрын
The opening ring makes me excited in ways I don’t understand
@michaelvoorhees59782 жыл бұрын
Ordered 2 last night and thinking about another...
@BladeBanter2 жыл бұрын
Looking forward to it, drop is scheduled for the 31st from his last post.
@E1337N3SS2 жыл бұрын
I commend your restraint in oil application for this disassembly! I imagine that was a pretty jarring experience
@Hexsyn3 ай бұрын
Ahhg I don't WANT this knife, but damn do I want to just handle it for a little while!
@_MiMo_2 жыл бұрын
It's a polarizing, attractive design. Expecting a both positive and negative review. I'll see myself out. 🤸♂️👉🚪
@erinsquirkychannel501 Жыл бұрын
wat does the black carbon fiber thing do that u put in changed out thks
@nickmartino2839 Жыл бұрын
Lol I find it the easiest when putting it all together.. to do it on something very soft for the under side like a pc of foam to give the button a little cushion... it just makes the whole process a little easier....
@clintonlewis12612 жыл бұрын
first time ive seen a pocket knife with magnets in it!
@tkindschi2 жыл бұрын
Mechanical friction replaced with magnets. I look forward to either the electronic, or light powered knife.
@csquared4538 Жыл бұрын
I am working on one but it requires antimatter to run properly. Batteries not included.
@destro69712 жыл бұрын
TIIIIING!
@jamesBGgarner2 жыл бұрын
Have done a review on this yet?
@brianjohnson37432 жыл бұрын
Exxon Shabazz has finally succumbed to the skyrocketing price of oil.
@michaelvoorhees59782 жыл бұрын
Is that the blue??? Looks different than the blue on the site if it is. Please let me know so I can decide on a color
@SynthiaVan2 жыл бұрын
TING!
@joshuawalters48512 жыл бұрын
It went a lot smoother than the crktritual
@andrewphillips97842 жыл бұрын
Using all titanium hardware would fix the magnet-related challenges of reassembly
@sethsbikehacks27302 жыл бұрын
Is the pocket clip reversable? Looks like it should be.
@michaelvoorhees59782 жыл бұрын
Yes
@lkayh2 жыл бұрын
I love this knife and its unique design, but if I were gonna disassemble it very often, I’m pretty sure the magnets would drive me to drink. Laughed a lot through this video.
@SynthiaVan2 жыл бұрын
Why would you want to replace the flipper bar with a non-flipper???
@brendenw64232 жыл бұрын
auto laws in california
@Muscovy72 жыл бұрын
@@brendenw6423 it’s actually not considered an auto even by California law. It’s no different to an assisted knife since it still requires manual force to open (detent)
@brendenw64232 жыл бұрын
@@Muscovy7 i'm giving the reason stated at 4:44 in the video.
@E1337N3SS2 жыл бұрын
@@Muscovy7 the law as interpreted by any given law enforcement officer or judge may or may not be the same. I'd imagine you'd have no issues the majority of the time, but it only takes one bad time to screw you over
@Muscovy72 жыл бұрын
@@E1337N3SS yea, if a cop really wants to waste everyone’s time with litigation, you’re right but honestly, if it goes to court you could probably sue the city.
@robertdumitru86752 жыл бұрын
Can you remove the magnets?
@michaelvoorhees59782 жыл бұрын
Yes
@shaggy_e2102 жыл бұрын
Looks like it needs titanium hardware to make it a touch easier
@rickabcd71082 жыл бұрын
Is this considered an assisted knife? Is it legal in Canada?
@NickShabazz2 жыл бұрын
You want a lawyer, not a KZfaqr
@michaelvoorhees59782 жыл бұрын
Probably not since it's a socialist crap hole lol
@anthonydoan19912 жыл бұрын
Magneto made this knife.
@dfailsthemost5 ай бұрын
All that function and only 36 magnets!
@the_knife_degenerate2 жыл бұрын
New business proposition nick shabazz owned quarters for $5
@richardhenry19692 жыл бұрын
Really like this design. I just don't have the kind finances that would allow me to buy jewelry that has no real value. Neat is enough for me to spend $400 on something I'd never use. Most be nice I can't afford gas. Let alone pocket jewelry.
@michaelvoorhees59782 жыл бұрын
Thank biden
@brandonseals67322 жыл бұрын
Gosh damn... u are scratching knives with ur torx bits... just scratching all over... u need to be more careful... watch how careful MC is with knives.... take note. I would NEVER send one of mine to you (it would come back damaged).... I have no problem sending to MC... he cares about the knife
@WillEDC2 жыл бұрын
This is the least amount of oil I’ve see Exxon Shabazz use 🫣 Edit:100usd of the knife price is the assembly labor lol!