I learned so much from this video, Nic. You are always very clear with what you are explaining to us, and your demonstrations help us understand even better, and it makes your videos fun to watch. Maybe I will consider investing in a system like this in the near future. I currently have a standalone RFID lock on my bedroom door which is battery powered, so an upgrade would be nice soon! Thanks, Nic!

Hey Nic great to see you again!

Well, your videos inspired me to spend money on this. Ive gotta say im impressed at the functionality and ease of use with the software! I like that it can have a set schedule to unlock doors, lock doors, require multiple fobs swiped to open a door, etc. Very simple to add new fobs and assign permissions. Definitely more value than I anticipated!

My school has the magnetic lock, because it was an older install in my district. Newer installs use either strike plates, or the panic bar pulls in on its own. In a power outage you have to press the request to exit button to open the door, then you can push the door open. The panic bars on some of the doors are locked however.

NIC, thank you very much for this video.

an apartment building near my house actually had a recent power outage and part of the mag locks were completely dead so I do see your point on how they can be unsecure and backup would be needed incase of power loss.

U do good job on here keep up there good work on here mate keep up there goid work on here

Nic my college does have a press to exit button although using a electronic strike! The press to exit button was actually used to let some people in! In a fire emergency whic it did happen before the door strike plate stil remains locked! But since it’s a door handle type lock it’s easier to evacuate in a fire emergency the press to exit button is only for letting some students in if they ether don’t have a fob or loose their fob!

My school uses the electromagnets to keep the doors locked. But code does require that when the fire alarm activates the doors unlock, and there are motion detectors that unlock the door when someone is near by. When the power goes out the magnets lose power anyways so the doors unlock. I have noticed that we use this system in the older schools since new schools have a system just like what you have installed.

Nice video, you definitely covered your bases. Your locks should really be on a separate 18/2. You can get away with the CAT5 for your reader, due to the short distance. If you run 22/4 or 22/6, you can land the drain wire in the controller cabinet. That'll protect your hardware. All in all, you did a better job than most technicians I have seen the aftermath of.

I used to work at a retirement home and they had electromagnets with keypads, but you also needed the keypad code to exit. Now that I look back that could be pretty dangerous having to input a code in an emergency to escape but I at least hope the fire alarm system would unlock all the doors.

Nic I do also have a ethernet switch as well

Even if you lose power on that panic bar and your are outside. You can use your key manually to get in the building.

I know all too well what you are talking about. That is one of the reasons why I prefer fail secure hardware. The only place I prefer fail safe hardware is stairways due to codes requiring stairway reentry. But for back doors, I almost always prefer Von Duprin QEL33A with NL and DT trims for access control. Occasionally, I use CD35A with electronic lever trim for access control but the lever is fail secure. About the only place I use mag locks is where security is not that important or where QEL33A would be cost prohibitive to use due to the functions that are required or delayed egress emergency exits. I don't trust mag locks too often because of the fail safe mode.

10:12 That is also how my school district does it.

6:15 I agree, power to open systems are scary. I've seen emergency exit doors that take 15 seconds to open. In an emergency those 15 seconds could be the difference between life an death.

I actually have some to BG 12 series back boxes in today

10:41 electrified panic bars do this too. If power is lost, you can open the door from the inside, but nor from the outside, the benefit being that it’s more self contained. (I understand that you probably can’t afford one tho. Just food for thought)

You know what? I am about to setup Access Control at my place as well!

Let's just think about electronic locks if you put an electronic lock with electronic strike Lock together on one door do you get the failsafe and the fail secure destroy access a fail secure lock"Does not work when power is cut but when the mag lock is and the strike lock is active as well which one they're both put together you get both failsafe and fail secure

Would it be possible to connect the garage door to it?

Nice i like that system

you should use the one your not using on the main door for that third door?

Very cool video

wish I could afford to get a basic setup so I could learn.

What kind of door handle are you using in the access contlor/security system room

In New Zealand, the locking technollogy is way different. The way it unlocks is by a lock inside the door handle which runs wires into the door that then locks and unlocks the door from the inside of the handle. So that locks and unlocks the outside of the door, but on the inside, you just open and close it like a normal door.

I have another question. I have a door with a door strike plate on it with a door access keyfob. The only prblem is on my door handle if It remains unlock on the inside the door can be open all the time without a door access key. How can I fix that and what should I do on the door handle side?

.y schools has doors at the way to the stairwell on each side (2 stairwells). The main stairwell has all the doors open with magnets holding them open. There's no locking shut mechanism. If the power goes out or the fire alarm goes off, it releases the magnets which shuts the door, preventing fires from spreading, but the doors can be manually opened. This is imo the only good use for magnet "locks"

Big fan can u make an security system update video?

Oh hey, I wanted to ask how did you carve out the electric door strike hole for the storage room door?

Do you ever experimented to hook the controller to the fire alarm system??

all that work for you're parents garage where you loafing around playing video games, and tweaking on door locks. You def are highly skilled! i def give you that !

It’s uh-ppote!

My apartment building has emergency release buttons for the doors and push to exit buttons and we have a key fob system to get into our apartment building when we're in our apartment building in a power outage we can go through the main lobby door but we can't get back in with our key fobs unless we used the emergency door release but the main lobby door is on a battery backup

my school has motion detectors to unlock the magnets

Do your cards even stop working to due frequency changes when its around other things? You see I stayed at a hotel a few weeks ago and their cards kept stop working> We had to go to the front desk every day to get new ones because thats the the front desk lady said. The frequncy kept changing

12:20 so michenical to exit electronic to enter. noice

Actually the mag locks require power to lock. The request to exit buttons cut the power to the lock. It is the strikes that can require power to open or closed (Fail open or fail secure on power loss). Not aware of any electromagnets that require power to open, but could be wrong though too.

2 readers to the strike 4:58

Do you have Paxton access control in Canada?

Could you use your access control to open the garage door?

The system is not a specific company but it is a cheap brand that businesses can simply put there name on it. There are so many rebranded control boards it hurts. They all use the same software and all cant have or use a facility code which is a major weakness. Also there is a high possibility of Data mining using network which is common where the devices are made. They should not be on a general network but on their own. The same can be said for the control software which is it should be on its own pc, which should be on its own network with the control board. While the system does work it should not be the main and only protection/access control used. One should have setup with card and pin and not just card only. And make sure you have a monitored alarm system if you intend to use access system.

Nic I have a joke! What did the mushroom say to the ant?

What would you do if you were to lock yourself out and leave your keys in and you dont realize?

I live in the UK and have a business in Pakistan. 2019 I purchased two boards, each containing four door access controls. During a visit to Pakistan, I installed the system. It was the best purchase I ever made. My manager and I hold the master card, so we don't have to worry about carrying keys or someone breaking the lock and gaining access to the building in our absence. Despite many robberies in the area, no one has ever attempted to break into our building." Now I am going back to Pakistan and would like to connect the whole system either with the cloud or I will set up a small server where I can remotely login and configure visitors' cards. I tried to install this Access Control system on Linux by using Wine but for some reason, it didn't work I think it was because of MS SQL database. I wonder if someone could share their experience installing this system on Linux or tried operating it via cloud

we have a stand alone keypad SecuraKey RK-65K. All I wanted to do is capture the Wiegand data and log it. Anything you can think of with out committing to a server. Rasberry Pi?

the card will have a number assign the card and you can programme the acces you want when you have spare time give it a go if dont work you can delete the card of the system.

when is next fire alarm syncrhonizaion video at your high school?

The Perobleed-Group plede

What readers did you use?

were is you new ceiling

The Dridi

Single Door Access Control System Core Control Components with Metal 110V-240V Power Supply Box and 1 Door TCP/IP Network Access Control Panel Wiegand Controller,Computer Based Software,Remote Open i use on Seco-Larm SD-991A-D1Q Mini No-Cut Electric Door Strike For Indoor Use​, Converts Cylindrical Lock Sets Into an Electronic Access-controlled Locking System, Stainless Steel Keeper

I did want to ask nic why didnt you decide to use salto readers?

was that a notifier onyx panel that was beeping

18:59 The fire alarm is going off

What system do you have?

The difference between fail safe locks and fail secure locks.

Whats the name of the app for the cellphone ??

Up-Hote is how it is pronounced

Can that access control system work if it isn't hooked up to the network/switch?

umm nic you frogot to blur out your last name I just realized that

I hope the access control software has not not abc/123 as the username and password as shown on the software cd.

What!?!?!?!!?!??!

do you still use windows 7?

What!?!?!!?!,!?!??!

897

If that computer is on the internet (which it appears to be) you should get that to windows 10/11 asap for security purposes because AVG is so 2009 (or older really) and if someone were really good they could probably take control of the system and open doors over the internet.

Your parents must be thrilled about this