NIGEL JONES BUYS A NEW SKATEBOARD!

Рет қаралды 53,497

11 ай бұрын

‪@NigelJonesTv‬ is in dire need of a fresh complete skateboard, so he takes you along for the ride to buy a new one!
Get everything you need to learn how to skateboard at brailleskateboarding.com
Become a member of Braille Army+, the best way to learn to skate: brailleskateboarding.com/plus/
For media or brand inquiries email branded@brailleskateboarding.com

Пікірлер: 105

@kyleengberg4358 11 ай бұрын

JDs a real one for bringing the mid setup snack though

@shtzweak 10 ай бұрын

Love how you said contraband and JD immediately turned around and went the other way 😂

@LilHomieColt 11 ай бұрын

Love these more raw behind the scenes videos

@clintbrosious9441 6 ай бұрын

Glad to see people still sharing this info about skating. I learned a long time ago about the whole physics/math behind it (Thanks Rodney for that). Used to get made fun of because of how i would nerd out about the minute details of everything, and how i was so OCD about wheel base length, Nose and tail length, concave shape. Wheel shape, size, and design. All the way down to specific Dura ratings for my bushings and pivot cups. Having everything properly lined up for your specific skating/style your body size is a game changer. Then sticking to those specifics will really show in your skating. I've been skating the same nose/tail/wheelbase/ width for the last 20 + years. Consistency in the stuff you use is huge. I don't settle for close enough.

@TheSquareOnes 11 ай бұрын

Nigel's sad "I got a new board too" during the intro of Glo's video from the other day is even better now, I assume the timeline is that they filmed this one and started the other video either right after or in the final minutes here where Gabe talks about going to film Glo. Dude just went on a whole adventure and the other intro was about to leave him out of the new board reveals. Love this non-linear storytelling approach to uploads, there's so much depth to the Braille Cinematic Universe.

@vdfritzz 11 ай бұрын

13:16 finally, i always wanted to see glo setup a bord with his grip over bolt style

@cbrvench2483 11 ай бұрын

Hahhaa when homie at the shop said Diamond risers I knew they wouldn't fit your trucks! I am not 100% sure what trucks the Diamonds match up with but not Ventures as I had experienced myself. My first board I had I put Grind Kings on with Pig risers and those were a great match.

@skatedad9794 11 ай бұрын

That was a cool video. Love seeing the process

@MarioGodoyMusic 11 ай бұрын

Gonna make my way out to Orbit this weekend. Best deck wall in the Bay.

@ritenour12 11 ай бұрын

Loved this more personal video super cool to fallow them around

@Labergemusic 11 ай бұрын

Orbit skate shop seems like an amazing place

@conradvermaak7016 11 ай бұрын

awesome video love it!!!

@TommyGFPV 11 ай бұрын

JD with the goldfish! He hooked you up!

@ryanrowe1975 11 ай бұрын

Great video

@AdventuresInSkateboarding 11 ай бұрын

I have been through the board madness. I finally settled down and am forcing myself to stick with on set for learning tricks. It is a fun adventure but it gets spendy.

@jouhajohnny 10 ай бұрын

52mm wheels are fine without risers on 147 thunders hollow lights and on venture lows for me (even on v-hollow lows)

@grandlegion1613 11 ай бұрын

The moment you bought them I knew.....so glad it delivered. I ride Thunders with eigth inch risers as well. I've had diamond tried to be sold to me so many times. They're not cut for Thunders and noone seems to be aware lol. Its terribly annoying but I do the same. I just drill them out. Other than that, they're my favorite compound for the purpose.

@_Maxten 11 ай бұрын

i said the same thing. diamond risers are meant to line up with indys. you need the shakejunt, pig, powell/bones risers to match up with the thunders. im shocked nobody knows not all baseplates dont lineup or that not all bushings dont fit, especially ppl who work at a shop

@Lonemite 11 ай бұрын

I used to ride shorty’s stacks risers. I had no issue swapping them with thunder, Indy, theeve and Krux. Theeve was my go to for a solid two or three years before I fell out the scene back in like 2013.

@L.O.C.1990 9 ай бұрын

I fuccs wit you dawg I been skating since 99 and unfortunately drugs n alcohol stole my life from what I loved most n i keep a deck on me but last 4 5 years fucced up and I don’t know how in lost all my tricks but Nigel got me skating again honestly y’all whole team has but he just got style and a lot of people don’t have that real talk homie. S/O NIGEL 💯💯💯💯💯

@AaronFelizmenio 11 ай бұрын

Thunders have a different geometry on their baseplates. You need Thunder risers for Thunder trucks.

@Lonemite 11 ай бұрын

Have they changed since like 2010-12? I used shorty’s stacks and never had a problem with fit on any truck I rode(thunder, theeve, Indy, krux and venture.)

@patricktrous 11 ай бұрын

I've got the thunder lunar hollow lights but I change the lower bushing to a standard medium independent bushing.

@jeramiedutcher6720 11 ай бұрын

I got a complete built at MOA about 19 years ago. It was fun. Since then I bought at least 4 setups. All completes, each a different style. Some of them I haven't used. Don't judge me.

@Orphioux 11 ай бұрын

... Haven't used... At all? Cmon man live a little.

@jeramiedutcher6720 11 ай бұрын

@@Orphioux I have a Waltz freestyle board, spoon nose, in the box, probably worth more now than when I bought it. I have 4 other skateboards and 2 snowboards. I want it to go to a museum if I die before using it.

@Redn87 11 ай бұрын

Right On!!! When braille house smokes bud and records the aftermath.

@arnymon9340 10 ай бұрын

Nice board setup! Have 8.5 deck, Krux 8.5 K5 polished trucks with 1/8 raisers.

@Jayson_Tatum 5 ай бұрын

That's a boat

@poodlenoodlesoup1 11 ай бұрын

What happened to Shorty's risers? They don't make em anymore?

@patricktrous 11 ай бұрын

In thing is getting the weight ballence right and the pop angle. 52s on 48mm trucks is ok for ground flip tricks with tablets but it's actually to light .. all around skating your want full conicals and 1/8 real risers thunder hollow lights

@jann470 11 ай бұрын

Thunders are very popular with those guys ❤

@Ejazzle 11 ай бұрын

Black on black on BLACK babyyyyy

@heiandude 10 ай бұрын

got those trucks and the bushings just melted away. I need new bushings like 2 months ago

@tenthousandquills1774 11 ай бұрын

NIgel love!!!

@punkfiendofficial 11 ай бұрын

Nigel!!!!

@joshferrell898 11 ай бұрын

Serving thru that slot 😂

@BretCahill 11 ай бұрын

I always go a 1/4" bigger with my trucks than the board size. You might wanna try 148's. If the risers are sticking out of the baseplate just cut them off with a razor knife after you mount the trucks.

@yes11889 11 ай бұрын

If your riser pads are sticking out they aren't made for your trucks

@BretCahill 11 ай бұрын

@@yes11889 just cut off the extra and make them work

@FloridaBoyGrizz 10 ай бұрын

Man ricta me used to be a solid wheel when I was skating in 2007

@chikararexzpo 11 ай бұрын

I will eventually run into you guys 🤣... Need me some new wheels and bearings😅also always forget to get the stickers😅"ohHhh dam them board so pretty you should have got the translucent tape🙃

@patricktrous 11 ай бұрын

Yea the thunder hollow lights sitting at 48mm then you add like 3mm for the rizer you still like 51mm high and use 52 mm wheels your still under weight and height than independent holow stage 11s😊

@Lonemite 11 ай бұрын

Yup, that extra weight is the only thing I hate about them. As a little guy it feels like I put brinks on my deck.

@JustinThomasSkateboarding 11 ай бұрын

Can you please tell us what happened to McNugget?? I’m very disappointed he’s not around anymore. And Ricky throwing mad shade at him like something happened??? Spill the Tea!! Lol

@666soso 11 ай бұрын

Wait what happened with Chris?

@ShawnxEdge 11 ай бұрын

Chris took a real job just like Mogley did, I think everyone knows skateboarding isn’t sustainable unless you’re super lucky.

@maga_skater4207 11 ай бұрын

@@ShawnxEdgein one of his live streams

@tweedledee9573 11 ай бұрын

He left because Nigel doesn’t save bugs.

@ShawnxEdge 11 ай бұрын

@@maga_skater4207 you know what the video topic was?

@Owlfluence 11 ай бұрын

Passing up the Ricta for the bones is wild 😂

@NigelJonesTv 11 ай бұрын

Never been a fan of ricta’s

@RaziAvel 11 ай бұрын

Y’all need to get Candy up in here to spec custom setups for everyone and then pay a visit to your board doctor guy (sorry I can’t remember his name but the guy who did the custom shapes for Ricky, McNugg & Mowgly) to get the right shape & size deck

@markbans 10 ай бұрын

im from the bay area. how can i skate on the braille miniramp? is it open for public?

@OddoRocket 11 ай бұрын

I’ll never understand how glow can skate with the grip covering his hardware. That would mess me up

@Jayson_Tatum 5 ай бұрын

WHERE DO I PUT MY FEET

@degerdi 11 ай бұрын

We skate the same setup

@patricktrous 11 ай бұрын

I use real 1/8vvwood risers under my hollow lights.

@Dkeeling502 11 ай бұрын

Best trucks ever i been skating them trucks for a year now and i will never ride a different pair ever again they felt like they was already borken in first time i steped on the board

@borbleborb4586 10 ай бұрын

11:14 homie had a flashback 💀

@papa_da_engineer 11 ай бұрын

"That was taller than a guy, that we once knew" 😆😆😆😆

@patricktrous 11 ай бұрын

Tablets are ok but they leave the axle and nut to exposed but give you more truck.... Spitfire full conicals or conical or radial. Is all I'll skate.

@Jorn_McLeod 11 ай бұрын

Black on black on black on black

@DorianDavisddd 10 ай бұрын

Never seen loose wheels in a shop

@JoeKyser 11 ай бұрын

Let me see that paperwork

@michaelburkhardt7056 11 ай бұрын

What is that snake farm shirt he's wearing? I NEED IT!

@puppet3668 11 ай бұрын

Ok that looks like glos twin

@patricktrous 11 ай бұрын

Real 3mm 3 ply wood risers.

@patricktrous 11 ай бұрын

No slip thin and keeps the feel.

@parab3llummusic 11 ай бұрын

i wanna see NIgel and Braille skate with @donutoperator.

@quinnhowell359 7 ай бұрын

So their names are glo and candy… i need to see the rest of the family

@miguel20012 11 ай бұрын

@ritz8900 11 ай бұрын

yall needa see if the cashier would be down to street skate with yall

@adamwallace8769 11 ай бұрын

Nice video different from the usual

@DHaze-re7pq 11 ай бұрын

Only my mother calls them riser PADS. And only my mother asks me if I need them….

@johnnydarko9744 11 ай бұрын

just got a signed girl deck

@geoffreyssmallworld 9 ай бұрын

We getting that explanation video ? 😅 😂

@stormy6953 6 ай бұрын

"that was taller than a guy that we once knew" WHICH ONE.

@unquestionabletv 11 ай бұрын

14:56

@estebansolis6807 11 ай бұрын

What happened to share the shred, his board company? He's riding for somewhere else

@luxintelligentia4632 11 ай бұрын

Yeah you shouldnt keep those decks on your trunk. Morphs really quickly in that heat

@drill4408 9 ай бұрын

What does it mean when they morph? Do u mean they get weaker?

@luxintelligentia4632 9 ай бұрын

@@drill4408 the epoxy and the wood itself ”melts” and it loses its original shape and yes it gets a little weaker

@colbert4win 11 ай бұрын

In my head, i was thinking "aurora varialis" before Gabe even started his varialis flipilius bit.

@Miklooo774 11 ай бұрын

Taller than a guy we once knew ? Man what happened to chris

@SickKingsProduction 11 ай бұрын

Taller than a guy that we once know, Yikes... I miss Chris.

@abskates9149 11 ай бұрын

Draw near to Jesus and he will draw near to you

@biggestthreattoyourexistence 9 ай бұрын

new boards are for posers

@jamesortega2340 11 ай бұрын

Almost 3 minutes of skating, not gonna lie, I'm kinda disappointed.

@JoeKyser 11 ай бұрын

Thats why its Braille Army

@davequist7710 11 ай бұрын

Did the title confuse you? It says buys a skateboard.

@psychoblack1411 11 ай бұрын

nigel is the most annoying member of braille.

@jarredtremain4644 11 ай бұрын

Tighten trucks abit more. Might make it more responsive and easy to land. Avagud1