How To - Fix Stopped Sonar Issue

Рет қаралды 96,486

2 жыл бұрын

Learn how to fix that pesky "STOPPED" sonar message on your Lowrance Display!
Subscribe and hit the notifications bell so that you will get notified when new training videos for your favorite Lowrance fishfinder are released! We have many more training videos coming soon so stay tuned!!!
Don't forget, we also have in-depth, step by step, comprehensive, training of all menu options coming soon as well. This means advanced functionality and what every menu option in the unit does and how to use it for those of you who want to get the most out of your Lowrance GPS/Fishfinder display.
Music provided by: www.bensound.com

Пікірлер: 74

@prebysfamily4457 Жыл бұрын

Thanks! We just bought a new boat and I was convinced the sonar was broken. This saved the day!

@dhern2613 Жыл бұрын

Cheers, it's these sort of short simple videos that get me out of trouble and straight to the point!

@alexaugoustides4754 2 жыл бұрын

Thank you so much. Am looking forward to using my sonar soon. Cheers very helpful

@robc3869 Жыл бұрын

Thank you. Fixed my issues

@alphaone4584 Жыл бұрын

Omg I thinking my don’t work right but thanks for that vídeo I resolved the problem 🙏

@fredrikrhymes 2 жыл бұрын

Great! Thank you so much!

@harrispilton6693 2 жыл бұрын

thank you that was easy fix.

@dustindennison1274 25 күн бұрын

Fixed mine!!! Thank yo so much!!!

@kylegarvey9487 2 жыл бұрын

Thank you man

@johannl555 Жыл бұрын

Bless you sir

@bradleybusch92 Жыл бұрын

You're the man!

@Cutman318 Жыл бұрын

Thanks for video💯

@rockyleroux5896 2 ай бұрын

Damn didn’t even check that. Thanks for the fix

@OllyNeusuess 8 ай бұрын

So helpful!

@thetravelingrussells7636 2 жыл бұрын

Thank you.

@garryjobe2468 2 жыл бұрын

Thank you 😊

@lalas.g 8 ай бұрын

Ωραιος σας ευχαριστουμε πολυ

@phillipnadeau3737 Жыл бұрын

Thank you sir

@HarlyGuy13 2 жыл бұрын

My first trip out with my new Hook and it was that way the entire time.

@alexaugoustides4754 2 жыл бұрын

Me too. So frustrating

@dennisroberts6418 2 жыл бұрын

Thanks!

@1hunts1fish Жыл бұрын

Thank you!!!!!!

@kentowakai1234 2 жыл бұрын

I love you man!

@kentowakai1234 2 жыл бұрын

It worked and un-bricked my hook reveal 5. Thank you for helping me have an epic day of fishing.

@richardjameslong9626 2 жыл бұрын

Thanks bro

@erickmischke38 Жыл бұрын

For the love of everything sacred and holy, thank you for this video! So frustrating!

@chrissnineyearwildlifejour9525 2 жыл бұрын

So funny. I just talked to a woman yesterday at Lawrence customer service while I was anchored on the lake I just launched on for walley. It was my first time out with the Hook 2 reveal triple. I was so exited as I had all my settings for side scan, bottom and sonar installed per Tom Boley, who is the best fishing teacher and catcher of fish because of his experiences (you should check him out if you haven’t yet. I had to be on the phone with the first rep for half hour to get the stopped of my screen. Then it came back after rebooting it! AAARG. This morning I talked to a guy again at CS and I now have an appointment with him whenever I’m on the water again, so sad I was so fired up to fish non-blind! Now I find this video hours later and it’s fresh. Did Lawrence contact you Night and Day Marine?

@chrissnineyearwildlifejour9525 2 жыл бұрын

I haven’t watched this video yet but I’m about to hit play. Will let you know when done. One of the CS people told me mine needs updates to work. I say it should work straight out of the box without updates. We shall see.

@nightanddaymarine8823 2 жыл бұрын

Lol no I just get asked about this issue constantly and have been meaning to make this video for some time now and just finally got the chance to do it.

@hugehealey8142 Жыл бұрын

does this cause the depth to stop az well

@martinlarkin9624 2 жыл бұрын

Night and Day. On a Hook2 5, what setting is used to detect your lure on the sonar screen?

@nightanddaymarine8823 2 жыл бұрын

There isn't really just one specific setting. I would turn your ping speed down just a little bit, lower your surface clarity filter, and make sure your running high chirp and not just 200 kHz. Those things should help you see the lure. Tho it also depends on the size of the lure as well. If it's too small it may not pick it up.

@martinlarkin9624 2 жыл бұрын

@@nightanddaymarine8823 Fantastic, I will take a look at my unit and adjust using your suggestions. Greatly appreciated

@gizataibassov6738 2 жыл бұрын

try a-scope in advanced options, there are vids on youtube showing it

@gageanderson8986 2 жыл бұрын

This makes me feel stupid but thanks so much

@barcobird Ай бұрын

It seems by default that my fishfinder starts up with the sonar deactivated, is there anyway to alter this or do I have to use your method everytime I turn it on?

@nightanddaymarine8823 Ай бұрын

You shouldn't have to. Make sure your transducer plug is pushed in as far as it can go before turning it on. And you might also try a soft reset and see if that helps. Also if you are turning it on before launching your boat into the water than can also be a cause.

@timjones6637 Жыл бұрын

That easy!! Question if you will? How do turn on water temperature? It’s not reading.

@nightanddaymarine8823 Жыл бұрын

Is it just showing you 3 dashed lines?

@timjones6637 Жыл бұрын

@@nightanddaymarine8823 Yes sir. I may not have programmed right since I’m newbie.

@huntincrazyj 2 күн бұрын

I have the Hook Reveal 7 double shot. When moving at approximately 30-35 mph my unit stops showing the depth and shows 2 ft for the depth. If I restart my unit it corrects itself then will do the same thing again. What would cause this?

@nightanddaymarine8823 2 күн бұрын

@@huntincrazyj cavitation. Those units are pretty terrible when it comes to loosing depth and then reaquiring it again.

@nightanddaymarine8823 2 күн бұрын

@@huntincrazyj not much you can really do except maybe adjust your transducer up or down a little. Slight adjustments can make a big difference. Or if u think it's about to drop out cuz your moving to quickly you can activate the stop sonar and then when u slow back down deactivate it.

@charliesmith9528 Жыл бұрын

Just bought a new reveal 7 tripelshot..noticed when i first powered it up screen FLICKERED badly for a minute then it shoed reg screen,,when i fixed stopped sonar the graph will not scroll

@Uvsnine 11 ай бұрын

I think I had the same problem. Nothing shows up on the screen while using any of the scan. I'm not sure now if that was the problem?

@vwilliams66 Жыл бұрын

Maybe you can help me. Mine is frozen on the initial screen where we accept the warning. It never moves on to start. How do I get to move on?

@nightanddaymarine8823 Жыл бұрын

Whay display do you have? Might try a soft or hard reset.

@congsan3528 Жыл бұрын

My split screen does not show the GPS map at all. Do you have any ideas? Thanks

@nightanddaymarine8823 Жыл бұрын

Which display do you have?

@congsan3528 Жыл бұрын

@@nightanddaymarine8823The first default split screen. The left side GPS shows a white blank with the arrow. No current map loads up.

@nightanddaymarine8823 Жыл бұрын

@@congsan3528 is this an X series display like a 5x or 7x?

@congsan3528 Жыл бұрын

@@nightanddaymarine8823 Reveal 5x split

@nightanddaymarine8823 Жыл бұрын

@@congsan3528 that's the reason then. The X series doesn't come loaded with maps and you can't add any to it either. It only has the ability to use the Genesis Live feature and create custom maps with your sonar as you drive the boat around.

@chrissnineyearwildlifejour9525 2 жыл бұрын

Night and Day Marine, I have not been able to get back on the water. See the comment below. I did what this video explains on the water, but upon reboot, It came back. Has anyone else experienced this after the fix mentioned here?

@OklahomaFishingTime2310 2 жыл бұрын

I had this problem and I thought it was an easy fix. But it's still not picking up the transducer. Sometimes it works on the water sometimes it doesn't drives me crazy

@nightanddaymarine8823 2 жыл бұрын

Make sure u have the transducer plugged all the way in. Their are three rings on the plug and all 3 should be pushed into the back of the display to where you can't see then anymore.

@OklahomaFishingTime2310 2 жыл бұрын

@@nightanddaymarine8823 k ill just have to make sure next time I guess got the tripleshot it's on a hobie kayak. Last time I went out all I used was the maps to have an estimation of the depths lol

@chrissnineyearwildlifejour9525 2 жыл бұрын

@@nightanddaymarine8823 I have done that and it still doesn’t register the transducer. Maybe updates are necessary to make it work?

@nightanddaymarine8823 2 жыл бұрын

@@chrissnineyearwildlifejour9525 it is always a good idea to update your display to the latest version. Not sure if it'll fix the sonar problem but you never know. Iv seen crazier things...

@chrissnineyearwildlifejour9525 2 жыл бұрын

@@nightanddaymarine8823 I bet you have being in the industry, lol.

@paulgrantyt Жыл бұрын

My Hook Reveal does not work in simulation mode. It does not show the full sonar screen.

@nightanddaymarine8823 Жыл бұрын

What does it show instead? Demo mode isn't on is it?

@paulgrantyt Жыл бұрын

@@nightanddaymarine8823 I checked that the simulator was on but I see I had to select a simulator file. In normal mode I get a grainy sonar screen, unreadable, but downscan looks fine. I have also selected the correct transducer (splitshot)