Nissan Almera N15 GTi Turbo SR20DE-T

No video

Nissan Almera N15 GTi Turbo SR20DE-T

Рет қаралды 74,620

Fortlox (Matt Neale)

10 жыл бұрын

My turbo almera build. Low quality video

Пікірлер: 42

@Fortlox_ 9 жыл бұрын

Thanks it was my project last summer end result made 267bhp using all stock pulsar gtir parts exept the intercooler.. The water feed and return i tapped into the rad hoses using rad hose tee pieces i got off ebay for like £4 each

@ammarazahari599 6 жыл бұрын

Matt Neale sir can i know the intercooler size that you use... Can you whatsapp me sir.. wasap.my/01152466606

@fabiengonsalves3333 3 жыл бұрын

Hi again i wanted to know if your idle speed control valve was connected to your piping or was it condemed also where your boost acuator was connected?

@user-vr3zf7jt1w 7 жыл бұрын

неплохо валит.

@AziGamerOfficial 7 жыл бұрын

Wat kind of turbo and how much boost did you run it

@fabiengonsalves3333 3 жыл бұрын

I currently doing a build like this in a p11

@Fortlox_ 8 жыл бұрын

no bov straight pipe to the air filter

@fabiengonsalves3333 3 жыл бұрын

Also wanted to know if this same build will work properly with a DET ecu?

@Fortlox_ 3 жыл бұрын

Im sure it could be done but i found it to be much easier having the DE ecu mapped with nistune

@mietovanilia7936 5 ай бұрын

Hi, im doing same with gtir manifold and dumbpipe, do you remember what turbo did you fit?

@Fortlox_ 5 ай бұрын

It was a stock T28 from the Pulsar. I had it rebuilt with 360 bearing ect.

@KingStealthDrifter 8 жыл бұрын

What BOV!!!??

@jakeshaw934 4 жыл бұрын

Hi mate just to clarify the engine internals are all stock DE?

@Fortlox_ 4 жыл бұрын

Hey bud. Yes they are. Totally stock almera gti motor.

@MrStinowAlbinow 3 жыл бұрын

I have a completely stock Nissan Almera and I want to do add a turbo. Did you do an engine swap? If so, what engine and turbo kit did you use?

@Fortlox_ 3 жыл бұрын

Hi, it was the stock sr20de engine. I used a T28 from a pulsar gtir. A pulsar gtir intercooler kit. 200sx injectors. Nistune fitted to the ecu at Horsham developments. Run low boost around 9-10psi as the stock sr2pde has higher compression than the pulsar gtir engine

@aleksihaapasaari 3 жыл бұрын

@@Fortlox_ you still have the car?

@Fortlox_ 3 жыл бұрын

No the car is probably a line of toasters and kettles now lol

@aleksihaapasaari 3 жыл бұрын

@@Fortlox_ you sold it or crushed it?

@Fortlox_ 3 жыл бұрын

@@aleksihaapasaari i sold it. Guy crushed it 🤷‍♂️

@marcinbrzozowski2091 6 жыл бұрын

Very nice project;) SR20 fit well or with a lot of mods? Regards

@Fortlox_ 6 жыл бұрын

Marcin Brzozowski relatively simple. All pulsar gtir turbo gear. Fmic ect. Used injectors from s14 200sx and a custom map for the sr20det

@marcinbrzozowski2091 6 жыл бұрын

Matt Neale thanx for info. I needed to switch from '99 P11 Primera 2.0td to '01 N16 1.5 gasoline. This girl is sooo small ^^

@ishotasheriff9340 Жыл бұрын

It make a lot of turbo flutter, did you had a blowoff valve ?

@Fortlox_ Жыл бұрын

No just straight pipe off the turbo to the air filter

@puii8735 3 жыл бұрын

What compression was this motor at the time if you comp tested it ?

@puii8735 3 жыл бұрын

Also how long did it last until it send a rod

@Fortlox_ 3 жыл бұрын

I didnt compression test it. Young and nieve.. i ran it on 9psi for over a year and abused the hell out of it every day. Wasnt until i sold it, the new owner upped the boost to a bar without mapping and killed it within a month