Amen 🙏🏽 on that I feel yah brother 😅

How did you determine was the TCM? Have same issue

@@AnythingEverythingGh hi after changing the valve body, it made little or no difference. I took a punt and bought a second hand unit on eBay and it worked. My vehicle had an accident on the corner where the TCM is located so it was safe to assume it was the issue but there was no actual visible damage. If you use another TCM, use the same part number or ask a Nissan dealer what part number fits as they changed them from 2010/12 then onwards. Good luck

@@northerner1374 ok great My fault code is P0840, P0845 bought a tcm from EBay to replace the old one. There wasn't any difference, my next stop is changing the valve body.

Hey, what materials or solvent can you use to clean the valve body?

@@AnythingEverythingGh probably 4-5 cans of brake cleaner. I would not use carb cleaner as it may ruin some surfaces👍🏻

Sonnax is a good brand.

P0963 relates to solenoid a and p161b relates to the transmission control unit. The car has been sat for about 9 month, and didn't have these beforehand if that info helps

Did you ever get the answer to the Chicago shop question?

Hello. Thanks for watching our videos. We offer Tech support if you are not a customer we charge for it but it will definitely help you with your question.you can call us for more information. 8139615560. Thank you

Did you ever figure it out?

unfortunately those screens are not something that is sold separately. If need technical support please call 18886442391 changes may apply. thank you for watching!

Hello@jmc6940!!!! Thanks for following our channel. Hope you enjoyed the videos. We bought it online, Amazon... if you have more questions or need us to help just write an email to info@sunbeltvalvebodies.com... Thank you

@Eugene foster exactly why I'm asking. Hoping the rest of my car dies before this stupid cvt lol

My 2011 Altima has same issue. Did you fix?

@@Foodie_888 Had to purchase a good used transmission. And all was fine after that.

@@splash5974 Omg he got ripped off. If the solenoid was not working, then just need to buy a new body valve (comes with new solenoids).

@@Foodie_888 No A new valve body doesnt fix it with this code. It is an internal issue with the pulleys not functioning properly. Its kind of a tricky transmission. The pulleys constantly adjust, changing the ratio. Once this happens, it will start slipping and overheating. Car usually goes into "limp" mode. Installing a new valve body is a waste of time and money if these are the symptoms and the same code comes up.

@@splash5974 Good to know. Thanks!

Did you ever find out??? I’m looking for the same thing😭

hello!!!! We are glad you watched our video. We can help you better through our website sunbeltvalvebodies.com or you can write to our e-mail info@sunbeltvalvebodies.com. Thank you

you need to get a valve body with 2 pressures if thats what came out of the car. We have those valve bodies in stock in you need one! 888-644-2391

Did you ever figure it out?? I’m dealing with this right now! Mine also only has one little screen and there’s no specific spot that it went too😖 I had to walk away because I was mad

Jesus did you figured out about the screen on the valve body. I have the same issue, I have a small cylinder that goes with small spring abd I have no idea where is it goes as well as a small cilynder has a little cup and has a little screen, they call strains or filter i have no idea where it can goes. Help please

@nicolea9686 I did figure it out, it doesn't matter, not all of them has tem, just make sure you place the one you have on the right place, the main problem I had was that after putting the part back it wouldn't shift to reverse, but that was due to one little O ring that at first didn't know were that went, but if you see inside the transmission you would see where it goes, there is a round little piece in there, that's where it goes.

@@ernestomoreno2596 I did figure it out, it doesn't matter, not all of them has tem, just make sure you place the one you have on the right place, the main problem I had was that after putting the part back it wouldn't shift to reverse, but that was due to one little O ring that at first didn't know were that went, but if you see inside the transmission you would see where it goes, there is a round little piece in there, that's where it goes.

it depends ! give us a call 888-644-2391

At the top of the valve body….you have to bring the whole thing down unfortunately

Sorry dont have anyone specifically in LA...... but if you have any questions feel free to ask!!

@@Sunbeltvalvebodies nissan sentra universal studio said they cannot fix the prob of my car becusee it does not show maintenance light on and even tho they know its cvt problem that car hesitate from getting speed and rpm going up and down. they said nissan company itself required proof before they can fix the prob. that was year my car still brand new and still under warranty now its way back gone. yet my car still having issue... i do regret buying nissan for the first time. not just that. nissan sentra of universal studio is scam. rip off.. believe or not. since my first time buying car. they put me in 600plus montly .. on 72terms. with down paying 1k+ and with my old fiat car as down. .. but after a month of buying they start hiding from me personally and all my calls... so my point now is how can all owner fix this problm and i beleive u know the solution for this.

@@estonguacon6108 First, you should have nailed them at the small claims court (Justice of Peace or whatever it is called) for selling you a defective product while the warranty was still valid. There are plenty of consumer associations in America that can assist you if you cannot write a proper legal letter. Second, you should have not bought a Nissan because their quality standards have been ruined by Renault after the takeover.

How do I remove and replace the CVT2 VALVE BODY

Same with mine, but it’s saying to replace the pressure control solenoid A and B

@@nicolea9686 my problem was in damaged teflon ring....

They engineered it so you have to bring it in to be repaired. Greed. They don't want consumers to fix on their own. I agree with you, it shouldn't be so complicated.

If anything if the valve is stuck it would stall.

I have 3 and can’t for the life of me figure out where they go😭