Excellent video. Thank you. No stupid intro, music etc just straight to the point, accurate and clear.

OMG in this video this man show us how easy is this process only need some but the garage guy charge me £70 unbelievable.

thank you for showing the diy way. alot of youtubers forget people come here to learn how to do things with your home tools

This video is actually very useful! I was searching for exact moments pointed at this video!

Thanks - just did mine following you instructions and it was an easy job. Thanks

Good video, easy to follow and nothing to distract from the topic at hand.

Great video! Diy friendly, great sound and visual, I'm doing the wife's tomorrow and will be keeping you near bye for any points of reference I may need, thankyou!

Great description on how to do wheel bearings.

Nice clear video. Thanks for posting. Will be doing this task on wifes Micra this weekend.

Spot on and very helpful. I like the way you didn’t use fancy expensive tools ordinary people don’t have at home but those we do! 😀 perhaps you could have given the torque setting for the bearing nut but it seems right is good.

thanks, really does help so many people!

Thanks, This has give me the confidence to give this a go on my Note.

Thanks for this video , because of you I can change it with new one by my self 😁

Well done!Thanks a lot. Your video was very helpful.

Doing this job tomorrow. Most informative, thank you.

Very good video, fast and just the necesary information. Thanks for this help.

Great video, thanks! The solution at 3.25 for removing the old bearing saved me a few quid :-)

Very straightforward thanks.

Tanks very much for the video! Very helpful :-) Keep up the good work mate! cheers, Ben

Clear and concise. Excellent.

Best step by step video well explained thank you very much 👍

Thanks for giving me the encouragement to do it on my own

Thanks for posting! Great video

great video very well explained

very good demo , thanks

Fantastic instructional video, thank you

Just watched your video and done exactly as you did. Thanks

great vid dude

Just what I was looking for 10/10 chap.

Awesome video.

Thank you very much for this beatiful video

Really nice explanation, thanks

Great video :)

Amazing man thanks for the great tip

great video great help thanks

Many thanks very helpful

Finally!! Please do more videos on this type of Micra! I had this issues last year and I had to take it to the garage. On a different subject, How to reduce the wind noise inside the Micra. on the motorway it can be really load and noisy, I can hear wheel, wind, engine noise. Also to know that on 70 Mile per Hour I get 3500 RPM which is really load! I always get a headache after a long day trip. Please help!

Great video! thanks for the tutorial! Is this the same process for the front ball bearing?

Thank you so much for help 🙂

Thank you for sharing!

Great that thanks nice and simple

Cheers dude!

good job

Amazing, thank you, I have to do the same on the Mrs Micra.

Bang on. Cheers boss 👍

Thanks!

well done

can you show us something about central locking problems in gx 1.0 k11, mine one giving trouble of strange sort.

thank you.

Nice one

great video my friend is this the same for a nissan note ntec 1500 diesel please best wishes ,,,patrick

I have a Micra 03 plate i have a noise coming from the front passenger wheel but it only appears in around 30-40mpd and in excess of this speed but its not a humming it sounds like a card does in the spokes of a bycicle wheel but get louder when i turn to the right would this also be a similar issue if it is the wheel bearing??

Howzit man , doing my bearing change, what size is that socket that you used to remove old sleeve and does the socket sit on a flat surface or in the sleeve tappered part ( the curved inside) Hope to hear back soon and thank you for such a useful video 💪💪💪

Thanks

What size socket did you use to knock out housing, thanks

Thank you for this video but is there a torque setting for the hub nut please?

Does all the Nissan micra k12 models differ with the wheel bearing size?

Excellent video, is the big nut "grunt tight" or torqued up to any particular value? As it looks like an uber-nylok I guess the former?

What kind of socket did you use to remove the outer bearing race?

Great video, do you not need to pack the bearing with grease before reassembly?

Does same bearing fit for Datsun GO

Ouch at 3:35, did you get your thumb on that?

I have Nissan 2004 can I use this video to do mine .. where I can buy the part and where I can buy the tools exactly what you used

thanks for the video :) just wondering if you know whether 2004 model would have exactly same hubs/drums

When replacing the drums, does it mater what way round you press the bearings in?

Good still you could have used plastic hammer while hammering bearing or some flat plate over the hammering area to insert the bearing perfectly in the position Still your job is good

Can you help ship a bearing here in The Philippines

And just the same wheel, but I have still noise coming and he said probably need to replace other wheel as well

can the abs ring fall off during replacement ? how easy can the abs ring be moved the wife had hers done but come back with an abs fault code but the person who did it dosnt recall seeing the ring ? thanks for any info

What size socket did you use

Well! ... My wife's wasn't as easy as this! I had to fabricate my own press to get the old one out! Wouldn't budge with just a hammer

Which size is the wrenxh for the big nut?

Sound

Das Lager hat zwei Seiten, die Beschriftung muss nach außen zeigen. Der Ferritring (ABS-Ring) darf nicht beschädigt werden, er sollte sauber und frei von Metallspänen sein. Die Radmutter sollte ersetzt werden und muss mit ca. 200 Nm angezogen werden.

Sadly mine bearing outer was stuck so be prepared to find someone with a press.

blowing the brakes is no good.. brakw cleaner and a wire brush maybe more useful in some places

Whats the god damn torque

I'm surprised you didn't pack some grease into the bearing housing.

in some ways the bearing change good but no attension paid to cleaness and the blowing of brake dust is not on by any ones standards thanks any way but profesionlism is important.

Tirty mm what is that

Did I just see you removed the rear brake drum whilst the car was held up Only on the jack???? That's not a very good way to show your subscribers the correct way to do this or any other repair that entails lifting the vehicle. You must know this???

not using axle stand, discharging brake dust into the atmosphere, very bad

Not much help to me. Mine is the RH bearing. Thanks anyway.

What size socket did you use to knock out housing, thanks