Nissan X trail Timing Chain Replacement (P0340 Camshaft Position Sensor A circuit)

Рет қаралды 75,929

Күн бұрын

2001 Nissan X trail QR25 Timing Chain Replacement
P0340 Camshaft Position Sensor A circuit.
*What Happen Timing Chain Stretch*
Once a timing chain is stretched and has lost its integrity, the chain may skip a gear and lose the necessary coordination leading to an engine misfire. Repeated misfires could indicate a timing chain issue and should be investigated. There is a rattling sound.
Timing Chain Kit:amzn.to/3gCNwzI
Tensioner Pulley:amzn.to/3AO62w0
Engine Valve Cover & Gasket:amzn.to/3XwpHKJ
Alternator:amzn.to/3UcsHJl
Drive Fan Belt:amzn.to/3u6Kib0
Hi
If you are looking for help with your Automotive Repairs, Automobile Installations, Mechanical Repair or Adjustment, please head over to carfix for information on it
Please drop your comments and subscribe if you like my videos. Thanks for all the support.
Disclaimer
We are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not carfix

Пікірлер: 52

@peterduxbury927 2 ай бұрын

I have to comment just how professional you were, in doing such a great job, and educating thousands of people who will not be scared to tackle a job like this! Greetings from Australia.

@carfix1993 2 ай бұрын

Thanks mate

@chrisoomen1240 4 ай бұрын

thanks for this specific and professional video!

@pierrepatrin4316 10 ай бұрын

Very explicit and detailed video, good job 👍

@georgemoyo8537 3 ай бұрын

Honestly,mmmmm the mechanic is very good,to me A big hand to him.

@Ogni374 9 ай бұрын

A very nicely put together Video in all aspects. Well done

@Lucysweirdandstrange 6 ай бұрын

Excellent video, thanks

@scottjohnston664 Жыл бұрын

Thanks for video. Job coming up.

@sopian5493 Жыл бұрын

Terima kasih bos sangat membantu

@holyjoemuttley1 Жыл бұрын

A great video! Very informative. Many thanks for doing this. 👍👍👍

@carfix1993 Жыл бұрын

Thanks

@dgordon9645 Жыл бұрын

Great job brother I also like doing my own work in the garage. Once done good for another 250 thou KLM saved $1200 in labour who cares if it takes weekend satisfaction!!!👍

@monovladd4392 2 ай бұрын

Nice, thanks dude 🤘🏼🤘🏼

@worldofcolors1152 7 ай бұрын

Thank you

@johnpetersen8875 Жыл бұрын

Is thera way to put back ascentric gear for the oilpump cover on Nissan Qr 25 engine or do i need to take off the cover again...looks like i made a big mistake and have to take off the mounting bracket the is a pain in the ass

@kdeep1690 Жыл бұрын

Rtv bond sealant too much. Falling inside engine. Will mix in oil and get stuck in oil lines.

@afrasm2478 Жыл бұрын

Torque specs? For all the nuts how did u figure that out or was it tighten best u can with hand

@abenaa3108 7 ай бұрын

Ooh my god,thanks very much

@neilmurphy7577 5 ай бұрын

great video, at what KM should you get the timing chain replaced? Or typically what mileage should it be replaced? I'm buying a 2008-2009 model 2.0 diesel and can't see much online Nissan say 300,000 KM but I'm guessing around the 220-250K KM mark?

@dcdc358 9 ай бұрын

So the chain already jumped on gear and even did create a bunch of metal chavings, yet the engine is still running afterwards? I like this.

@losauble1436 11 ай бұрын

Thx for the Details in your Video, tomorrow i will do it to my xtrail after 133.000km run. I'll write you again if my ixi is runnig again. Thank you and have a great time by doing sutch Detail video's...

@marvinvickers4806 8 ай бұрын

Is it running again?

@losauble1436 8 ай бұрын

@@marvinvickers4806 The engine Is running very good, but now the gaspump under the backseat don't work, next searching for parts and work on the car... Thx

@Jonhenrysneip Жыл бұрын

Very nice done, thank you 🙂

@azmisalleh6465 Жыл бұрын

I just move intake camshaft 1 tooth backward and it's solved the problem.

@ajidwinugroho6680 Жыл бұрын

Nice video. I have same problem 😀

@christianrosas2612 Жыл бұрын

I notice you removed the exhaust in order to get into swamp part oil did you remove the frame where the engine mount sit also??

@carfix1993 Жыл бұрын

No need to remove frame just exhaust front part only

@Dumb_Money 11 күн бұрын

Balance axel timing mark was not in right position, it's the lowest round axel on low left?

@Dumb_Money 11 күн бұрын

@12:13

@ShakinaMeke-jy1ei 3 ай бұрын

How can I replace oil pump

@amanyachrispus7010 5 ай бұрын

But I'm not sure if you have powered engine oil but otherwise good job done

@benjaminduliguez3468 Жыл бұрын

Thank you sir...i ask you about timing chain later.

@benjaminduliguez3468 Жыл бұрын

I have a unit Nissan extrail QR20 engine.job overhauling.. right now..but that.timing chain. Is not marking yellow 🟡... Maybe i dicide replacement part...i need your opinion... good evening sir..

@jrhd81 Жыл бұрын

Did you have to use any special tools to get this done and how long did it take?

@carfix1993 Жыл бұрын

No Any special tool 8 hours

@crisd345 5 ай бұрын

Upper plastic chain tension maintainer removed at 4.10 and put at 16.40 with the wrong site in

@gareebaelias6206 10 ай бұрын

❤

@nikit0ondn 4 ай бұрын

Hello, I have Nissan Xtrail T30 with the following problem. Start the engine when it is cold. Drive some time until the engine reach temperature and become warm. Turn off the engine and try to start it. The engine does not start. After waiting about 2 hours, the engine starts. We checked for faults, the gas injection, all sensors etc and cannot find the reason. Do you think the defect may be in the timing chain? It is not original and the distance passed is 50000 km.

@carfix1993 4 ай бұрын

First change crank and cam angle sensor If not go to timing chain Cold start timing chain ⛓️ not stretch getting worm it stretched

@peterduxbury927 2 ай бұрын

I had the same problem. It was the Cam Angle Sensor. Remember to replace both the Crank / Cam Angle Sensor together as new.

@nikit0ondn 2 ай бұрын

In our case, it was the FlowMeter

@viviusgg6241 Күн бұрын

Balance shafttiming wrong one

@jasonlavelle3293 11 ай бұрын

Should use gaskets over goop, just makes more work next time around cleaning all the crap off.

@bensanchez1554 Жыл бұрын

I thought the problem is CKP sensor circuit? Your given concern is different from what you are fixing. The problem you are fixing is mouse and misfire apparently.

@bensanchez1554 Жыл бұрын

Noise I mean.***

@hafamihanif7285 Жыл бұрын

he is demonstrating through crank sensor adjusment what would happen if the timing chain is stretched and caused the cranck shaft position to advance one notch and affecting the engine and hence the apparent sensor problem. which means the problem is not the sensor but the timing chain has stretched. he is right. in a way he is solving both the sensor and timing chain 'problem' in one go! genius.

@MIGSSZ 7 ай бұрын

12:18 the balancer timing is wrong here. You missed the balancer mark on the balancer, if you flip the chain around then it will be corrected.

@user-rn4je7vr9h 10 ай бұрын

I don't think you set your balancer correctly

@MIGSSZ 7 ай бұрын

I was about to say the same thing.. They definitely did not get the balancer timing correct, only the mark. if you flip the small chain around, then you will notice it will line up with the timing mark for the balancer, and the mark is very visible.