Thanks for all the video’s Adam. I just got into nitro last month and you’ve really helped me learn that part or R/C
@AdamDrake9 ай бұрын
Glad to help
@hgthehulk22359 ай бұрын
Awesome thank you for all the videos !! And passing on all the knowledge and wisdom !!
@AdamDrake9 ай бұрын
My pleasure, happy to help!
@Fullsenditrc9 ай бұрын
Very good info I know nothing about clutches just the springs thanks for the info !!!
@AdamDrake9 ай бұрын
No problem 👍
@TruggyDriver699 ай бұрын
I use the ProTek clutch w/ 4x aluminum shoes w/ 4x 1mm springs in truck (Ultimate M5S and MSX and works perfectly at least w/ tracks in the southeast all the way to Thornhill. I tried the 2x2 shoes and it wasn't working out well at all. I personally think ambient temps have a play in clutch tuning just like it affects an engine. Another thing is having good throttle response/control is key. Great vid and thanx Adam.
@RazorRC9 ай бұрын
Great video and explanation!
@AdamDrake9 ай бұрын
Thank you!
@MOONOVERMIAMI9 ай бұрын
Hello great video information Adam
@AdamDrake9 ай бұрын
My pleasure, thank you!
@a2rc9 ай бұрын
Yep. Makes a lot of sense. - Best thing to do is drive with your current set-up to see how it is and then adjust from there. - Thanks for the nice vid ❤
@AdamDrake9 ай бұрын
Thank you!
@matthewjhardy9 ай бұрын
I’m running the stock Mugen clutch in my MBX8R. I noticed that there seems to be 3 aluminum clutch shoe options from Mugen. I believe the kit comes with “no dot” aluminum shoes and then 1 dot and 2 dot are available. I’ve had a little trouble finding good info on the differences. I’m guessing the 2 dot are the hardest. Would love to hear some good info on this and in what circumstances you’d run harder or softer aluminum shoes in addition to the carbon. Would you typically increase the size of the spring as you go up in aluminum shoe hardness?
@adamcamacho56759 ай бұрын
You're the man ty
@AdamDrake9 ай бұрын
Thank you!
@briancarroll62459 ай бұрын
Werks clutch 2 carbon 2 aluminium, works well, cheers Adam👍🇮🇪
@AdamDrake9 ай бұрын
Very nice, thank you!
@flubber7889 ай бұрын
Hi Adam. I usually run all aluminum shoes on my mbx7r. I do find though, that the car feels a bit too quick out the corners, so I end up spinning
@AdamDrake9 ай бұрын
Maybe try using one or two softer clutch springs to make the engagement earlier and smoother.
@user-bu5kd8wh1z6 ай бұрын
Hi Adam. I am using the mugen vented 14 tooth clutch bell and aluminium shoes. Would you say that is ok to run like that
@danross36688 ай бұрын
Steel flywheel or aluminum on buggy, using the AD3 engine? Thanks!
@franciscovazquez45899 ай бұрын
👍🏼👏🏼👌🏼
@rubencriviDT9 ай бұрын
Adam, do you know if I can install the Mugen (or any other) 4 clutch shoe kit (including the flywheel and clutch bell) in my MBX5? I have the 3 clutch shoe that came with the kit, all aluminium and 1.0 springs. Thanks!
@AdamDrake9 ай бұрын
Yes, you could use the Mugen 4 shoe clutch set-up and or the OS 4 shoe clutch setup that we have available on www.thedrakeracing.com
@brucebartlett19509 ай бұрын
Great tip would of not got there lesson learned thx.
@AdamDrake9 ай бұрын
Glad to help
@Douger3189 ай бұрын
what about the tekno clutch im sure all is the same corect