No 4 Enfield hand guards and bands
Рет қаралды 12,640
12 жыл бұрынThe hand guards on Enfields contribute to the stiffness of the forend. To do this best they need to fit flat along the top of the forend and be clamped tightly in place.
@parkerbrough3852 5 ай бұрын
It would be helpful if you actually showed us how to do all of this not all of us know how to play with the floating systems of barrels and hand guards.
@achillebelanger9866 4 жыл бұрын
That most be a LITHGOW front band.An early one too. My current # 4s are Savages!
@kris308100 3 ай бұрын
Hi, many thanks for the video. Can you advise the best way to put that indent in the front barrel band please?
@FED50H 4 ай бұрын
Watched to see how the first band, or last, depending on you look at it, the thinnest, is installed...does it get forced over the front sight?
@Strato50 7 жыл бұрын
My No4 has been shooting VERY low... like 10" at 60 meters, even with the sights set up between 200-400. I took a look at the guards and forend, there was zero up pressure at the nose with the top bands removed. The metal insert at the center band was also noticeably putting down pressure at that point. I've shimmed with card paper and will see... any input in the meantime?
Bloke on the Range
Рет қаралды 27 М.
Mystical Kung Fu Video
Рет қаралды 9 МЛН