Thanks for watching God bless

❤

Thanks❤

Thanks

Thanks

Yes sir, thanks❤

@@PoorMiners321you definitely want to break the surface tension with a detergent. I can guarantee you’ve lost some bonding wires while rinsing as they’re so tiny and fine. I usually recommend sifting everything through a couple mesh screens. First screen should be about 100 mesh or so to catch the legs, you continue to crush anything besides the legs until it goes through that sieve. Then i recommend using a 200-300 mesh screen to separate the fine particles better and help guarantee youve got them crushed enough to free up all of the gold bonding wires. Then you can put into nitric, followed by AR as usual. Another method I’ve been wanting to try for my larger scale ic chip runs (i usually save up 100-200lbs of ic chips at a time before a recovery) is incinerating and crushing to a fine powder like previously stated, then throwing everything into a crucible mixed with lead and borax to capture all of the metals, pour into a cone mold, and then have only the metal to work with in the beakers instead of fighting the fine powders through filters etc.

Yeah thats really good idea, i wanted to melt directly so we can save time and effort, but so far i dont have furnace to do the process but soon i make propane furnace if i have budget..

Yeah that is the best for you, you have nice equipment for your work

@@PoorMiners321 Just very small hobby furnace, 10x10x10 cm inside, cheap chinese product, but works realy well. I was surprised by XRF analysis reading so pure gold.

Thanks, maybe 1kg or 1.2kg

Thank you..

🤣🤣🤣 thank you bro..

Taga mindanao maguindanao bro

videolarımı izlediğiniz için çok teşekkür ederim hocam sadece bu yapılabilir bölgenizde hidrojen peroksit arayın, ortak adı aqua oxinada, eğer yüksek bir konsantrasyon bulabilirseniz, bu iyi, yaklaşık %35, eğer %35 olan hidrojen peroksit bulamıyorsanız, %3 veya %6 da kullanabilirsiniz, biraz kaynatmanız yeterli Uzun zaman oldu nitrik asit yerine bunu da yapabilirsiniz nasıl kullanılacağı ile ilgili videolarıma uğramanız yeterli. bir sonraki cevabınızda not alın türkçe çevirmek benim için zor olacak ingilizce çeviri yaparsanız daha iyi olur

@@PoorMiners321 merci pour le répons je vais essayé de acheter ça et je te dirai le résultat ,à la prochaine ✋

Thats okay if only few amounts of carbon, but do Your best to separate gold wire easily crushing it perfectly and please separate all ceramic ship, because ceramic is heavy and not easy to remove from your pan and mix to your gold wire, ceramic is heat resistant and make you trouble during smelting.

thankyou@@PoorMiners321

Maybe iridium and silver are not dissolve in aqua regia solution.

Sir, if it is iridium, what is its identity and at what degree does it melt?@@PoorMiners321

👍

@@PoorMiners321 one day i hope to be a beast like you

❤

I'm always with you my friend, top videos, I've already learned a lot, but I still have some difficulties

Do it in open area. No people no homes around

Yeah thats realy true, very hard to collect thats why i use transfer pipettes to collect fine gold wire because if you pan very hard then you loss it.

Maybe 37.7 $USD

@@PoorMiners321 That's not very much at all. Thx for the answer though, the time you spent and the cost for the boards and materials? How much profit was it?

Yeah thanks, spending time around 1 to 2 hours, and the materials sold me chips only around 600 philippine peso per kilogram that is $11 to $12 USD, and our profit closer to $25, so not bad for me.