I've been running the secondair pnumatic beadlocks for a couple years now and they've saved me out bush on multiple occasions. Only a few weeks ago I hit a tree stump that was hidden in the grass and it immediately destroyed the tyre, however the beadlock cushioned the impact and saved the rim. I was then able to limp out of the track with a torn sidewall to a find a flat area to jack the car up and swap to the spare tyre. I highly recommend them, they're a good investment for that extra protection against tyre damage, protecting the rims, as well as locking both tyre beads....and can keep them fitted to the daily rim with near zero maintenance.

Uncle Pooly knows his audience, mutes the the music as soon as he steps on the loud peddle ❤❤❤ Thanks for the info and the epic video! From limpopo 🎉🎉

😅 so good when Jonno is like "Reckon we could stop talking bout it and just do it" 🤣

Every bloke loves a good free sticker until its yellow, good to see a smart way around it

Bloody hell, I was just thinking I had way to much money sitting around. Thanks for helping me get it back down there. That stuff was starting to stress me out 😂

Fast becoming my favourite KZfaqr - another useful and great episode

On the auto air system ARB makes the linx that does set pressures up or down. I use that and a company called up down air and have a similar setup. I have 4 Schrader valves at each corner and 4 whips with quick connects. I click on the 4 whips, grab the arb Linx and set the pressure. Works pretty good!

Good to whatch some quality 4x4 content that isn't just one big ad or way to dramatic over everything. Loving the content keep it coming

Ahhhhh the hangover recovery with uncle pool

Mate I'm so glad you started this channel, it's entertaining, informative. Better than most of the big channels so keep up the good work.

From the Avanterra website "For off-road use only. SecondAir™ Beadlocks may not be legal in all states." I remember with the Staun version that the drilling of a second hole in your rim also makes it illegal to fit. Thats why Staun sold rims with 2 valve stems. Because if they are manufactured like that then its legal. Look up Roothy back in the day put them on one of their budget 4wd specials.

Mate that's mind blowing.... u have put all the new gear the tyres, rims , internal bead locks everything to proper test.... bloody legend

Thanks for the info on the tyres and the new bead locks.your videos are getting better each time you make one they are very informative for us novices on mechanical and tyres. Cheers Lee

Hell yeah Pooly another ripper video loving all the informative videos mate keep doing you and keep up the wicked content 🤙

Absolutely loved this ❤ nicely done Pooly

Love this channel, keep the vids up Pooly! So much better than alot of other 4x4 yt channels, cant wait to see what this channel evolves to!

Great collab. Thanks!

Honestly impressed by the performance of the secondair pnumatic beadlocks

You are by far my favourite KZfaqr make me laugh every time and I’m learning every episode as well I do want one of your trays when I do my chop

More of Jonno! great duo quality content with helpful information 👌👌love it lads

That 2 new things I hadn’t heard of! Legal bead locks and graded 4wd track maps. Downloaded it straight away Absolutely awesome thanks mate!

Quality episode mate love the content, straight genuine blokes. 🤙🏼

Phwoarrrrrr what a video mate.. love it!

Sweet playlist with the background music

Solid Ep and solid new apprentice. Those beadlocks are impressive

Those second air are the solution for me. In the raptor I constantly pop beads. I’ll be getting them tomorrow. No more bead popping or defecting. Thx mate !!!

They are so awesome great video legends

That air compressor set up is so good

Another fun filled episode and it's great to see Pooly and Son he will be an integral part going forward after watching this

Those internal bead locks have been around for years and are an excellent tool. Cool content

Between you and tj and Mac you got the best content on KZfaq! Up the vic boys yeewww

You pair are awesome together, hope you do more stuff in the future

Nailed the video production! And your music is on it, unc!

Uncle pooly back at it again! Good to see a practical way to avoid the free stickers! Keep it up big fella.

Ripper video mate, pretty cool to learn about those internal bead locks and Aussie made 👌

Love the vid and the homemade tyre deflator bloody awesome

Quality fresh content. Well done 👍🍺

Uncle pooly full of information and knowledge

Fantastic video!

I love this it really has made up my mind on what I going to use next on

Great episode guys. Very entertaining, New mates in the high country, giving out Stickers. Mat Preston safety tips.

Such a sick video nah I love it! I’d definitely buy some one day! I’ve gone on trips without letting my air out thinking she’ll be alright… she wasn’t ever alright tho I need a set up like you good sir ! Super easy and no way to forget it

Well done mate keep her up

Just love your cruiser

Best video editing out of all the lads i follow. We used to fit these second air beadlocks along with staun internals 15 years ago. Good bit of kit but still do require maintaining. If you run them super koad and dirt or dust gets in itll flog the tube out in no time. Good to see someone running them again tho 👌

Big ups for the app mentioned I didn’t realise I have a few tracks right near my place, opens so many doors cheers

Love it Pooly, might have to get me a set of these 👍

I nearly marched out to the shed listening to The Proclaimers Woohoo 👍

American here! Pneumatic Beadlocks are up and coming here too. I want to try them out myself as beadlocks are not "legal" on the roads here. Plus the labor to install them are $$$. Amazing content and channel Pooly! Cheers 🍻

Awesome content bud 🍻

This is pretty much the same setup as tubliss for dirtbikes which has been around for a while now. Great idea 👍

Love ya work mate

Another great video mate ! I was aware of internal bead locks but thought it was just a comp truck thing. After seeing this video I want a set !

Pooly I have been running them for 20 years first the original Stauns (the precurser to 2nd Air), now Coyotee from the US which are a big improvement over the initial design. Zero air no problems and no issues in 20 years. For your auto tyre inflate deflate look up Jamec Pem AUTO1000

Mad content, mad rig bra Subbed.

Love the ep Could you do a run down video of how you did your compressor set up

I slipped into a rut on that track and lifted a wheel far beyond what was comfortable lol It’s a good time

I ran the same style of beadlock on my old dirtbike, worked a treat!! Even managed to stake the front tyre, rode the whole day then rode home. Hopefully the car version is just as good!!

That is one sexy rig mate haha! Built to perfection!

Pwooahh Pooly love channel mate! 🍻

Cheers mate. I hope you were fully sponsored here because im off to buy the Goodyears and the Second Airs

Awesome info Uncle Pooly. Keep up the original content mate. Frothing on big bad Baz.

My brother put me onto your channel! Awesome content, also I love the sticker on your rear diff 😂😂😂

What a great idea

That tire inflation/deflation system is a thing of beauty

Aussie Enginuity at its best- thanks for sharing

Take one of those mechanical deflator caps that some people use to drop tyre pressure to a set amount and put it where you let the air out of your system. It’s a non-complicated way to let air out to a preset pressure that you don’t have to keep an eye on. I use Australian made Staun brand🍻

Used to run internals way back in the day. I ran the staun ones and they were great, easy to install and like you said you don’t have to get new rims

13:00 love the safety shoes.

Ive only ever seen one rear bead come off the rim while running external beadlocks. But that was under some pretty harsh winch comp driving. These are definitely a pretty solid option for on the road. Will be good to get a update after you out a few kms on them

Good video Pooly !

if you want an auto cut off for your tyre deflator, just buy a set of Stauns and sonme adapters to get the threads right. you can have 4 preset pressures then :) pretty simple i reckon

BKT run a similar "flute" between the lugs on their tractor tyres too for mud ejection

Ohhh shit yeh another ripper uncle Pooly 💪🏼💪🏼

Dope!

Can you give us a rundown on how you setup your compressor looks heaps neat and wouldn’t mine chucking that in my Ute

Those wheels are phat!!

Yeah awesome stuff those tyres look nearly exactly like my 003 geo lander Yokohama see how they go.

Finally somone who isnt flogging darche gear or entering codes and adverts every 2 seconds

Love that some music!

Gee uncle Pooly really knows how to edit 👌💪

What a great product, Aussie made🇦🇺🇦🇺👍 those tyres look like they have less than half a fart in them LOL . Uncle pooly no more shelling out $$$ on canaries and more for zinger boxes 👌🇦🇺

I run the tubliss system on my dirtbike (which uses the same principles as this air beadlock) I back it, as ive gone over the handlebars grabbing the front brake where you would normally wash the front end out. Only issue is you have to run some tire slime to keep the pressure somewhat consistent over lengths of time

I’ve been and looked at that track and said fuck no 🤣 good stuff mate and good content

works offline aswell pretty good to know where you are

Neen running them for a while, wouldnt recomend haveing the beadlock valve back there as its good to check the pressures of the inner tube regularly. They have been a reliable setup.

Would a spunding valve work for setting cutoff on tyre pressure?

Cheers for the info 👍 have not put a step wrong with your KZfaq yet

Australian product. Fantastic! Product needs more promo in the 4wd segment. But as you boys said potentially saving people on the side of the highway that really don't know how too or not safe too change a tyre. Limp it somewhere.

Iv definitely seen the rear bead de-bead on low pressures (steel beadlock rims) car was basically on its side in a big rut 🌅 I think it actually did both rear inner beads 😂

These are and identical set up that I run on my moto been running them for years hoping someone would do something similar with a 4wd tyre

just like how a motorbike beadlock works, awesome to see them on a car

We run them for years but made by staun. Got our first set around 2005 for the jt's, back when steel 15x8's were cool 😂😂😂.

been around for a long time, even on enduro bikes.

Had looked at these some time ago. The only problem is that you are not legally allowed to drill holes in your rims as you may compromise the strength or integrity of the rim. If the rim comes manufactured with a second hole already in the rim then it is, apparently legal.

Top quality shit right here

Looks like im getting me some beadlocks. Possibly one of the most informative videos i've seen in a long long time. Newtracs is fucking sick too. One of the best apps ive ever paid for.

Well im converted, time to get rid of my naughty beadlocks and getting some of these.

This is awesome, as you once said “I don’t need sponsors, I just buy what I want”. Great little tech spec video show casing a great product from a small Aussie business Our favourite Islamic extremist state member Jono is a good feature on the channel too P.S. no wonder ya found this product up there as I heard the boys in swan hill like their bags of chalk 😉

I liked mind my 2nd airs, ran them on a GQ for my 35” pedes. I just found the inner pressure needed to be monitored- wasn’t set and forget. *also… Roothy was advertising/pushing these back in the day!