Thank you! It worked for me, but I did heat it about 2 blasts of about 10 seconds each. My wife now thinks I'm smart. I gave you due credit. I have a 2013 Grand Caravan.

Feb 9, 2024. This fix worked perfectly. Thank you so much for posting this. We used a proper industrial heat gun set on high for 5 seconds. Chip was too hot to touch after that. We let it cool and reassemble and installed the radio. I phoned my dealer in Edmonton, Alberta, Canada and a new radio is $550 plus $90 for installation.

My radio hasn't been working in 2 years ,I did your method and it is working, thank you so much 👍

Thank you for the video. My 2015 Grand Caravan's radio volume stopped working summer of 2023 after a good month of cutting in and out. I was able to use the Aux, however, the volume control eventually stuck on zero. The local mechanic wanted $500 to replace. I was contemplating sending it to a repair shop (which would have been around $200) when I decided to do one more repair search. Followed what you did (right down to the foil on the heat gun). I was so happy when I plugged it back in and it worked like a charm! Update: The fix lasted almost 4 months, and it started cutting out again after parking outside in the sun, so might be heat related. After re-doing the fix, and verifying it worked, I decided to coat the chip in epoxy. Unfortunately, that means if it recurs I won't be able to repair again.

Worked great. Gave it 2, 3-4 second shots and done. Total time about 1/2 hour with testing before I reassembled radio. Thank you

Can confirm this worked on my 2011 Ram 1500. Thought it didn't at first, but turned the radio on today and everything was fully functional. Great video! Life saver.

Oddly enough my neighbors Ram radio started having that same problem yesterday. Instead of a heat gun I used my reflow soldering station gun. Thanks for the tip cause it worked like a charm and saved him over $350 on a used radio. 👍

I followed step by step and it worked perfectly, after 3 years with no radio. Thanks for sharing. Finally some tunes on the way to work. You’re a lifesaver. 👍🏻

Followed your video and was able to re-solder the chip OMG you saved me a ton of money not having to go to the dealer or buy a new stereo. My 2012 RAM has tunes again I can't drive without music.

Thanks a ton! Worked on our 2012 Dodge Grand Caravan. You’re a lifesaver!

This worked perfect for me! Had to remove extra parts of center console to get the cover off but was really easy. Thanks for the video

That was a great fix! Mine had no am/fm for years and I used Sirius xm. But last week my speakers started cutting out every 5 seconds. This fixed all my problems.

Man, thanks a lot! I replaced the antenna on my wrangler and then I didn’t have any station sound. I thought I might have messed something up with the antenna. Crazy how that went out at the same time.

My truck had no sound for a couple years. Finally saw this video tried it and it worked amazing. You wouldn’t believe all the crazy stuff people were saying to do.

Thanks for the post. I was having the same issue with my AM/FM in 2012 Dodge ram. Followed your instructions and now the radio is working perfect.

Used this method to fix my radio and it worked like a charm. Thank you for this video and the walk through to get my radio going again. It’s been 4 years trying to figure this out and finally found something that works.

Very very helpful I just couldn’t figure it out? It really worked, I did every step you showed and it worked. I used a mini torch and pressed down on the black scuare with out moving a single bit, heated up all around and not move it. Put it back together and it worked……🎉 thanks

Thanks so much! I haven’t had local stations for years and i followed the steps you shown. Tons of thanks.

Followed along exactly and now the radio works in my Jeep Grand Cherokee. Thanks for posting this 🙌🏼

Same thing happened to my radio 2012 Jeep liberty sport. Haven't done anything to repair the chip yet started . Saving this video for later. Thanks for the video.

Big Thank You for this video. Yesterday after 12 years my radio start to cut out sound in my 2012 Ram 1500. Used heat gun, count to 4 on each side and radio working fine now. Thanks.

2011 Ram. Thank you. Perfect diagnosis. Fixed and working well.

Tim foil trick worked mint. Up and listening again. Tks

Great job, taking one apart Tuesday! Thanks

Thank you for this video! The van I bought my wife a few years ago has had this issue and she has been without radio the whole time. I just did this and it is back to working like brand new! She is going to be so happy though i'm a little nervous to tell her how simple a fix it really was. I tihink I will tell her it took me all day long lol! Thanks again!!!

Thank you for this video! My am/fm hadn’t been working for awhile and today the aux started going as well, I did this and it’s working perfectly now!

Thank you. Just what is happening in my Dodge Caravan. Will try this soon.

2011 Ram same problem here. Looks like my next project, Thank you for the video.

Thank you....Followed your directions to the letter. Bought a new heat gun (needed one anyway), did the foil thing, heated the chip on high for 5sec. plugged it in and works fine (for now). The sound was popping on and off when everything else was working. Now I have my BT and radio back!!! You Canadians always get it right!!

Thank you, great video, my radio works again, you sir are a genius!

I followed your advice and it worked!🚙

That worked like a champ. I did a like heat up and it fired right back up but if it happens again I will get a heat gun and do it right. Thanks a bunch you the man. Saved me alot of money.

Worked like a charm! Thank you for the video!

thank you did this repair and it works for now also I'm not real steady so I bought heat gun on amazon that had a real small tip I could not see the soda points even with 2 pairs of readers so I took a picture with my phone and was able to make it big enough to see exactly which ones were not shiny took another picture after heating an they were all shiny it work thanks mine was 1012 ram

Hi Rudi ! (i have the exact same radio) My radio fail 2 years ago , i tried your instruction 10 minutes ago and it worked first try :0)

Hey guy great tutorial. I fixed my radio watching your video. I can't believe it worked for me. Thank you.

Is your radio STILL working ? Thanks so much ! After over a year without a radio, it's working again thanks to your instructions. Like yourself, hope it last for another 5 or 6 years. Mine is a 2012 dodge grand caravan. Wish i had've found your video sooner.

Thanks Man Great Instructions worked like a champ

I'm impressed, you did it without any flux lol, to anyone reading this, please use flux if you're going to reflow the chip

Thank you sir. You did great fella ! Super helpful!

I have 2011 Dodge Grand Caravan with same problem, I will try this, thank you for the tip.

Thank you, this worked for me on my moms 2013 Caravan. Super easy

Very useful video. Worked like a charm. Thank you!

Thanks for the tip this worked on a 2016 caravan

Worked great. Didn’t have heat gun so used propane torch. Made heat shield out of aluminum foil. Thanks

Worked for me! Just be mindful of the components next to it as it heats everything. If anything shifts just make sure you push it back into place gently and let it harden.

DAMN what a great video!! You are spot on, THANK YOU!! 👍👍👍👍👍👍👍👍👍👍❤

I’m happy I’m not a ram owner. But I will admit. That HeMi do be slappin’

Wow! A video actually explaining how these radios were just poorly made and how to actually fix it my God.

Thanks! That is my problem now! Great work!

Merci, car j'ai le même problème avec mon Ran 1500 2011. Très bonne explication.

Damn!...you're awesome, worked out great for me also

Thanks, worked perfect!!

Hey buddy thanks very much for posting this video. It really worked.

Thanks, same problem and radio. Worked for me, '16 GC

Dude! THANK YOU This worked great.

I’m doing this right now but gonna have to use a hair dryer? Hope it works… so it didn’t work but I think it’s a operator problem lol. I tried two different techniques. One with a lighter heating up a screw driver and applying to the element… the other applying a lighter to heat up a pliers and blow dryer because I didn’t have the equipment.. left on for like 10 seconds.. guess I’ll go without a radio until I can afford a new one. But! I am thankful for the video because now I know how to do it 😅

Thanks so much Worked then unworked did again and working thanks

Thank you Thank you Thank you ........I did it on my best friend's Patriot.....worked perfectlly...

Thank you, works perfectly now!

Very Good thanks for Sharing

Worked slick

Thanks you so much. It worked!!!!!❤

Solved my issue! Thanks!

The ST next to the station identifier (channel) means that it is broadcasting in Sterio. LOL😂😂😅😂😊

Worked great, first time heated for 3 seconds then second time for 5 seconds.

I just purchased a 2011 Ram 1500. The stereo lights up like it did for you. No matter what I change the radio station/ SAT or the third setting. I have no sound. Do I need to replace the stereo?

My radio is acting weird, plays for 4 seconds then off for 2 seconds, cd player and sat preview same, then after awhile it will start playing all the time, then back to cutting in and out. Would this be the same module problem you showed or a different issue. Any help appreciated. Tks

Thanks a lot. Absolutely true 👍.

A friend has a 1999 dodge truck and his display is intermittent. We took off the bezel and removed the radio but as we were pulling the radio out with the connectors still hooked up the display came back on. As we put it back in it went off again? The radio works just the display has a ground or loose connection. I tested the truck wires and they are good so something is going on with the radio. Need to take it apart to see what is loose on the inside. Any ideas?

Well presented, no nonsense. Just purchased the hot air tool, arriving today, so here's hoping. Two questions: Should I carefully apply flux paste to the pins first? Should I apply clear epoxy after repairing to avoid later breakage of the reworked joints?

****just a little note,,,, dont heat too much because that little chip is just sitting on top,, if you heat too much the chip will slide right off its spot and then its done for,,, lol been there done that,, anyone has a radio for sale,,

I had the same issue but I only had to clean the corrosion off the contacts and spray with electronic cleaner. Then I coated with clear paint to seal it off from moisture.

Do you have a chip number for this? I’ve got a 2007 Cadillac CTS-v with no sound on only FM. If you turn it all the way up you can just barely hear it. Haven’t been able to really find anything online other than to replace unit. I’ve had it out and took it apart but didn’t really see anything so put it back together. Cd player and AM are fine…..only FM. Your video is closest thing I’ve found so far. Thanks.

Do you know if this fixes a popping noise produced by the speakers? I can play music but it will pop, cut out the music and then play the music again and just repeat that

Dude it fucking worked thanks man😂

Thank you so much

Thanks.

Thanks you 👍

It needs a wiring harness, will the site blow it up?

What temperature should heating gun be on?

I guess I'm wondering why you didn't flip the board over and heat the pins with a soldering iron. That would keep the chip cooler.

I’m having this problem as well, but I’m wondering if I would just be able to replace the radio with a new one since I want a touchscreen Bluetooth radio anyways and I’m really not in the mood to take apart a whole radio

i took mine out 3 times and it still will cut out but now it will slowly come back. (5-10 sec) each time i heated a little more not sure what to do now

Can i use a small soldering iron instead of a hot air gun for this project ? I have exactly the problem mentioned. Looks like this might be the solution. Thanks

I followed this DIY twice, and both times it worked for only a week before it stopped working again 🤔 Any suggestions for a permanent fix?

SO I'm wondering what having someone else do this should cost me?? I break things.. Is it going to be cheaper to replace or repair

Why would my radio sound start going on an off? For like 2 seconds consistently, will burning this module fix that as well as the fm/am radio

This worked twice, but each time after putting everything back together it stopped working. Is there anything i can do to make sure it stays in place and doesn’t mess up after 5 mins ?

My Radio plays and everything works then all of a sudden it clicks off and stays off til whenever and then back on. Any Advice.

Will this fix one that has sound static but no music.

Worked for me but it stopped working again after 3-4 days, should I try again?

Thank you for the video. I followed the steps and tried it. It didn't work. I brought it back in and heated it a while longer and took it back out and it actually worked. Charging my parents $75 for fixing it.

had my husband do this, he connected it back and the volume button now doesn’t go above 1…is there a reason why this happened? 😅

Damn this is definitely not an easy fix, minds well take it to a repair shop

lol, reminds me of the playstation 3 oven tricks..., this is rediculous, how ... who ... when .... did this become known! lol

12 Dodge challenger stereo volume goes off and on.

lots of people having this problem, there should be a radio recall.....chrystler garbage

Let you know,

Mine won’t turn on at all