No video

No such thing as a nitro engine? and 0% nitro why?

  Рет қаралды 7,134

thebug 404

thebug 404

Күн бұрын

Пікірлер: 119
@grim_6102
@grim_6102 4 ай бұрын
You sound just like this other Canadian channel called AvE. Guys smart as hell. Knows quite a lot about everything you can think of. Kinda the way u do lol
@thebug4046
@thebug4046 4 ай бұрын
He actually only lives a few hours away from me! Haha
@grim_6102
@grim_6102 4 ай бұрын
@@thebug4046 hahaha too funny
@thebug4046
@thebug4046 4 ай бұрын
@@grim_6102 same with ERCM he only lives like 3 hours away from me lol
@MrNebRebew
@MrNebRebew 11 ай бұрын
I learned several things. Thanks!
@thebug4046
@thebug4046 11 ай бұрын
No worries glad it helped!
@BenjaminBayliff
@BenjaminBayliff 3 жыл бұрын
Great video .... I allways heard you say the zero percent mix line all the time.. it was nice to hear why and some history and gain some more knowledge which is allways appreciative...... keep burning glow fuel !
@thebug4046
@thebug4046 3 жыл бұрын
Thanks man I get lost of questions about that's why I made the video explaining it
@themadscientest
@themadscientest 3 жыл бұрын
Tether car racing at the top level runs the 80/20 methanol castor fuel only, that is in monster 10cc glow engines.
@jeremywilliamsrc8797
@jeremywilliamsrc8797 3 жыл бұрын
Loving the videos brother. Thank you for the knowledge, learn something new every time from your videos and your enthusiasm for the hobby is contagious. Thanks bro!
@thebug4046
@thebug4046 3 жыл бұрын
Thanks for watchin! It's a lot of fun! KBN!
@keithphillips1234
@keithphillips1234 4 ай бұрын
So found 5 gallons of VP methanol M1 $61.00 for 5 gallons. Then use the Klotz Super Techniplate $25.00 a Qt. Trying to follow your videos, I know you say just buy premade stuff, but I’d like to try this myself. Now my tmaxx 2.5 has been a champ for 3 straight years on my VP 20/9 fuel, I have not touched the carb since 3 years back, it’s been set it and forget it. I assume that would change? Live here in Arkansas. Summers get nasty here soon. Thanks man. Enjoy your content btw.
@thebug4046
@thebug4046 4 ай бұрын
Sounds like a good deal. Run an os lc3 glow plug and you want 10% oil by volume i Believe that's 12.8oz fluid ounces. and it will take a little adjustment as is with any fuel %%% you switch to. It might be a little more sensitive but because you have the best methanol quality it should be fine
@everythingrc6504
@everythingrc6504 3 жыл бұрын
Nice, informative & helpful video thanks 👍
@thebug4046
@thebug4046 3 жыл бұрын
No problem!
@choke666
@choke666 2 жыл бұрын
My dude, i have learned something new today! Thankyou for that!! Crazy.
@thebug4046
@thebug4046 2 жыл бұрын
Haha no worries I have lots of videos about things like that that you probably had no idea about so when you have 5 minutes definitely you're looking check out the last few I posted
@choke666
@choke666 2 жыл бұрын
@@thebug4046 Oh for sure. I found you thru Hybrid. N W O for life. But yea, i will absolutely be checkin em all out. Thankyou!
@thebug4046
@thebug4046 2 жыл бұрын
@@choke666 he is awesome and right on man KBN!!
@jamescollins4178
@jamescollins4178 3 жыл бұрын
I didn't realize we were going to science today.. 👌im in! Very informative sir thankyou
@thebug4046
@thebug4046 3 жыл бұрын
No problem!
@khaosnitro
@khaosnitro 3 жыл бұрын
update! IT WORKS! bought the methanol 100% got the klotz benol racing castor oil mixed 20% to start off car runs just fine with cool blue smoke across the lawn .
@thebug4046
@thebug4046 3 жыл бұрын
Right on! I would drop the oil tho 20% is mostly for airplanes run around 10 or 12% it will run much better
@khaosnitro
@khaosnitro 3 жыл бұрын
@@thebug4046 yes very good! i only mixed in a small medicine bottle for the test lol,next batch i will use less oil 10% to 12 % that will be perfect! thanks again
@thebug4046
@thebug4046 3 жыл бұрын
@@khaosnitro any time!
@greasemonkey6912
@greasemonkey6912 3 жыл бұрын
Thanks for the awesome information keep burning klotz bud 👌
@layback209fixorsmash3
@layback209fixorsmash3 3 жыл бұрын
We used to run glow engines off 99% isopropyl alcohol with 20% castor oil. The pharmacy special. Ran just fine, we just added a head shim per 10% in nitro once that was an option.
@thebug4046
@thebug4046 3 жыл бұрын
I tried 99% mixed 90/10 wouldn't run i guess the changed something
@layback209fixorsmash3
@layback209fixorsmash3 3 жыл бұрын
@@thebug4046 we had problems keeping the castor oil dissolved, had to shake the crap out of it. I tried to find the engine we were doing it with, I remember a heck of a deposit build up as we didn't have the degummed castor. You'd have to wire brush clean the bore as the piston would stick overtime. These were steel piston, cylinder and rods. Your video makes me want yo go back and try again. This was on much lower compression airplane motors, maybe that was the difference?
@713Ace529
@713Ace529 3 жыл бұрын
Keep burning Questions. 😂. Aren’t we all glad we found you. 🤓
@thebug4046
@thebug4046 3 жыл бұрын
🤣🤣🤣
@christopherdrew7112
@christopherdrew7112 3 жыл бұрын
Till your on fire
@coreytarducci36
@coreytarducci36 2 жыл бұрын
Dropping science on our asses, love it!
@thebug4046
@thebug4046 2 жыл бұрын
No one really talks about it or explains how and why
@davidlavergnelacasse2356
@davidlavergnelacasse2356 2 жыл бұрын
Other fact helps in cold weather to start I live in Canada in cold weather I only use 10 to 15% nitro I already do this little thing that saves me a lot I use the same oil very good product keeps the engine clean the mixture 50% sintetique 50% castor oil klotz benol is perfect for old engine without bering with plain bearing made of brass it is better
@thebug4046
@thebug4046 2 жыл бұрын
I'm in Canada as well by Vancouver it doesn't really get that cold here
@davidlavergnelacasse2356
@davidlavergnelacasse2356 2 жыл бұрын
​@@thebug4046 Me on my French side of Canada In Quebec it's very cold during the winter I use very small engines around .o49 to .o10 size in extreme cold the smaller it is more difficult to start we have to keep it hot I am used to making my own diesel and nitro fuel also I use gasoline for 2-stroke engine in a engine it works but not efficient I made a video of that
@thebug4046
@thebug4046 2 жыл бұрын
I have a handful of Diesels and I have tried gasoline and it barely works
@Rebecca_The_Dragon
@Rebecca_The_Dragon 2 жыл бұрын
Now if we can just to Cave Johnson justice and make a combustible lemon that burns houses down (or runs our rc engines lol)
@thebug4046
@thebug4046 Жыл бұрын
Sounds like fun!
@daniellemcdonald6010
@daniellemcdonald6010 3 жыл бұрын
Good information love it lol remember beer is good nitro is great
@salihmehdi7594
@salihmehdi7594 2 жыл бұрын
I & other rc airplane lovers use only methanol & castor oil since the late of 70s...because nitro methane is not available here in Baghdad & the hot weather...we fly only from late of September to the mid of April..but I re assemble the engine after 3hours of running because of the gummy effect of the oil so cleaing must be done all the season of flying
@downunderdan5132
@downunderdan5132 3 жыл бұрын
I guess the only real nitro engines in the purest sense are Top Fuel rail (or bike) engines. And they are interesting too as they start on methanol and switch over to nitro prior to a run. They practically self destruct as they run though lol. Some guys have converted their glow engines to petrol (gas for you guys?) by installing spark plugs and CDI. That would be an interesting video (wink wink nudge nudge). As always, keep up the great work!! 😎🇦🇺
@fraserdavidson2366
@fraserdavidson2366 3 жыл бұрын
Very interesting mate. Thanks
@thebug4046
@thebug4046 3 жыл бұрын
No problem!
@gregoryhines7
@gregoryhines7 3 жыл бұрын
You were saying you use benol in dirtbikes and such. Can that replace 2 stroke oil all together in gas mix or is it just an additive? Thanks
@thebug4046
@thebug4046 3 жыл бұрын
It's designed for all 2 stoke engines big or small just so happens its also made for rc engines to just make sure to read the instructions! Very important! And it can separate in cold weather do not use in oil injection systems
@gregoryhines7
@gregoryhines7 3 жыл бұрын
@@thebug4046 thank you
@thebug4046
@thebug4046 3 жыл бұрын
@@gregoryhines7 some i would recommend is the klotz super technplate it's Castor/synthetic blend and easier to work with But again it is not designed for oil injection pre mix only and yes you can use it for RC car engines
@icurado2
@icurado2 3 жыл бұрын
Ahahah you are the man! Just burn everything down ahahha!
@thebug4046
@thebug4046 3 жыл бұрын
🤣🤣🤣
@kennedybushnell7003
@kennedybushnell7003 3 жыл бұрын
Great video. Out of curiosity, why do airplanes run different nitro and oil ratios? I imagine part of it is because they run more lean higher up in the air?
@thebug4046
@thebug4046 3 жыл бұрын
Altitude change compression ratio the type of carburetor that is used they also run a lot less nitro because they swing a prop that will change how fast the fuel burns and The last thing you want is detonation really old plane bearing engines need around 20 to 25% oil to keep them alive most modern ABC airplane engines will be just fine around 16 to 18% oil
@cheezyrider1111
@cheezyrider1111 3 жыл бұрын
What do you use to clean your engines? They are always super clean. I just picked up a rs4 type ss off of eBay and it has a k12 in it. Never heard of it but I guess it’s a nova based engine. Would like to clean it up since it still has good compression
@thebug4046
@thebug4046 3 жыл бұрын
Non chlorinated brake parts cleaner and a light oil to put back together
@nitrogas5719
@nitrogas5719 3 жыл бұрын
K12 is a nova it is the same as a nova cx12 those motors rip I had one in my RC10GT, had 8 gallons sold it going strong!
@nitrogas5719
@nitrogas5719 3 жыл бұрын
If yours has a rotary carb then this should save you some trouble, the factory setting for the high needle is 5 turns out, the low is 3 1/2 turns out, and the idle gap should be set to 0.6mm good luck!!
@cheezyrider1111
@cheezyrider1111 3 жыл бұрын
Thanks for the info! It’s got a slide carb on it I’m not sure if it’s the original or not
@nitrogas5719
@nitrogas5719 3 жыл бұрын
@@cheezyrider1111 no problem! If you need any help post a video on your channel!
@jmaclaren4147
@jmaclaren4147 3 жыл бұрын
I buy the crappy tyre methyl hydrate and mix Sig Castor oil in it. I believe if it will run in my Saito four strokes, it will run in anything.
@thebug4046
@thebug4046 3 жыл бұрын
The 4 strokes seem just fine on it my magnum xl 91 has no problem and that's with a 80/20 mix
@pinoyhalo-halo2628
@pinoyhalo-halo2628 3 жыл бұрын
Have you tried these 4 stroke toyan engines? Does it run on 0% nitro?
@thebug4046
@thebug4046 3 жыл бұрын
Any glow/nitro engine will run on 0% and no i haven't tried them very expensive at almost 400$ Canadian
@frank.l181
@frank.l181 Жыл бұрын
Hi Bug, some companies sell 99% pure methane fuel for car racing, can you able to purchase the nitro additive too? I want to start make my own brew.
@thebug4046
@thebug4046 Жыл бұрын
You can get it here but it's a lot of paperwork and it's really expensive so it's not worth it it cost over $100 per gallon or pier Nitro methane and then about $80 for a drum of math and then another 100 for the oil like 300$ to make 4 gallons
@frank.l181
@frank.l181 Жыл бұрын
@@thebug4046 , it's $90 a gallon for turco pure nitromethane, for every liter/quart of Methanol you have to add 8.4 oz. Very dangerous stuff- invisible flame, can start with static electricity. I wouldn't suggest smoking a cigarette. Lol. Thanks again for great info!
@thebug4046
@thebug4046 Жыл бұрын
@@frank.l181 No worries and don't worry about Nitromethane dude it's not even that flandable it's almost like trying to light kerosene by itself. It's no more dangerous then mixing a gallon of gallon for your weed eater. Actually gasoline Vapor is more dangerous. It really comes down to common sense haha
@nitrogas5719
@nitrogas5719 3 жыл бұрын
I’m switching to castor oil in my gas rc, I believe you recommended a ratio of 32:1? I am currently running 28:1, should I go 32:1?
@thebug4046
@thebug4046 3 жыл бұрын
32:1 is plenty of oil that's 4% oil Castor oil is one of the best oils
@nitrogas5719
@nitrogas5719 3 жыл бұрын
@@thebug4046 will do! Thanks
@xtmnitro2355
@xtmnitro2355 3 жыл бұрын
Definitely interesting info great content had question on compression recently pick up some Xtm mammoths with the 24.7 one engine that’s currently running had no shim and the other which was locked up but freed up has 1 shim on would I be damaging the one with no shim if I run it that way ? Such thing as to much compression? 🤯 usually just run Vp racing 25%
@thebug4046
@thebug4046 3 жыл бұрын
I have a rebuild video on the 24.7 I believe mine only has 1 shim as well you can have a look and see but it should be fine
@fcbaker65
@fcbaker65 3 жыл бұрын
Nice vid ,I used 0 nitro fuel to pre-lube my engine on first startup ,I have a gallon of it ,as my friend gave it to me that use to fly planes!...Good tip to folks that dont know history of it ,keep them coming!
@JohanWS
@JohanWS 3 жыл бұрын
I would call it methanol engine, because "glow" engines could be both methanol and gasoline. I have gasoline engines running glow plugs. For example OS GGT 10 and Evolution 10gx are airplane gas engines running on glow plugs.
@thebug4046
@thebug4046 3 жыл бұрын
That is a true fact but you don't see gas glow very often but still runs on a catalytic glow reaction
@thebug4046
@thebug4046 3 жыл бұрын
@New Crappers were for Dave actually i have. But didn't explain it or show how the charts works since I didn't have one or a way to show it doesn't mean I was making stuff up or anything like that was just going straightforward to make it easier for people to understand since the same question keeps popping up but since your such a Scientist about things like that maybe you could make a video explaining it. And show everyone how that works. Or you can sit there and complain and talk nonsense like a 5 year old. Maybe instead of sitting here complaining and whining on my channel go out put your phone down and live your life or whatever it is that you want to do with yourself
@elmafiozadjnico3044
@elmafiozadjnico3044 Жыл бұрын
I have a question im in mauritius island in the indian ocean i want to know who rc fuel are in different color
@thebug4046
@thebug4046 Жыл бұрын
Color means nothing. It's just whatever dye they put in the oil before they mix it.
@williamchisholm5776
@williamchisholm5776 3 жыл бұрын
Hi mate could you do a video on how to mix your fuel so guys can make there own
@thebug4046
@thebug4046 3 жыл бұрын
Yup just have a look in the channel
@KacKLaPPeN23
@KacKLaPPeN23 3 жыл бұрын
I wonder why Ethanol didn't work for you. Where I live (germany) it's illegal to ship Ethanol to private entities, so some companies started making "Bio-Nitro" fuel, which is basically the same mix but with Ethanol instead of Methanol. Only thing is that you basically need to preheat the engine otherwise it's harder to start. Only thing I could imagine is that it needs the nitro more than the Ethanol. Are there any other Methanol substitutes you tried? Methanol is about 2-4 years away from getting outlawed (at least for private entities) here and is already a pain to get (very expensive and only sold by people with 3 years of training, etc.), so having a cheap alternative for my basher engines would be great.
@thebug4046
@thebug4046 3 жыл бұрын
The reason for it not working is the glow plug doesn't want to react with that kind of alcohol it will kind of work but not very well and the oil doesn't mix very well with it seems to float on top for some reason methanol is what's needed for the platinum to keep burning its easy to get if you look in the right places
@kittyhawk9886
@kittyhawk9886 3 жыл бұрын
@@thebug4046 if this in an aeroplane setup where the additional weight of a sub c cell is not an issue, will running a constantly powered glow plug work?
@thebug4046
@thebug4046 3 жыл бұрын
@@kittyhawk9886 with ethanol the carburetor has to be set up right because it burns even different then methanol. Just burns 80/20 or normal 5% nitro in your airplanes. The ethanol has a very short shelf life and not all oils will mix or it will go bad and the oil will float out they had special engines just for it they also had very high compression ratios. Not really worth all the messing around. I have tested it lots and you will never win
@johndoe528
@johndoe528 2 жыл бұрын
@@kittyhawk9886 That's sort of how it used to be done before the invention of the glow plug, with a condenser coil.
@ady110fv
@ady110fv 3 жыл бұрын
Interesting England OK for nitro
@TechnologyGuy223
@TechnologyGuy223 3 жыл бұрын
What model HPI engine is that? Looks beautiful!
@thebug4046
@thebug4046 3 жыл бұрын
HPI 12E 1990s and thanks!
@nighthawkj30A4
@nighthawkj30A4 3 жыл бұрын
@@thebug4046 i like Hpi and OS engines my cousin had a few of those Hpi engines ran good started up.
@jakec79
@jakec79 3 жыл бұрын
Awesome video! Curious why you say Traxxas fuel sucks though?
@thebug4046
@thebug4046 3 жыл бұрын
Poor quality Ingredients a ton of added dye to Stain engine parts inconsistent tuning small tuning window runs hotter and leaner because of its very high oil in it at 18% its also more corrosive more oil isn't always good it's actually harder on your engine if you stick with a good quality fuel like a 20/9 or 30/9 mix you will see a massive difference in tuning performance and longevity
@jakec79
@jakec79 3 жыл бұрын
@@thebug4046 thanks I ended up ordering a bunch of bones brew 30/10
@thebug4046
@thebug4046 3 жыл бұрын
@@jakec79 your going to love it you won't look back
@SayMyNaamee
@SayMyNaamee 3 жыл бұрын
Nice
@zachattack2016
@zachattack2016 3 жыл бұрын
How much for that nitro engine?
@thebug4046
@thebug4046 3 жыл бұрын
Not for sale no longer made
@khaosnitro
@khaosnitro 3 жыл бұрын
i found a suppler VP Racing ,they have 20% RC nitro fuel very expensive! but they also have this stuff called "M1 Racing Methanol has a 99.95% minimum purity" 39$ for a 5 gallon can very cheap is this OK to make 0% nitro fuel like your formula?
@thebug4046
@thebug4046 3 жыл бұрын
That's what all rc fuel starts as so yes it's fine 90% methanol 10% klotz Castor oil or klotz super technplate
@khaosnitro
@khaosnitro 3 жыл бұрын
@@thebug4046 great thanks!
@krodyssey4770
@krodyssey4770 3 жыл бұрын
What happens if I mixed nitro fuel like 20/9 and 30/10. Is it bad
@thebug4046
@thebug4046 3 жыл бұрын
Run one or the other don't mix them it won't help anything
@krodyssey4770
@krodyssey4770 3 жыл бұрын
Will using 0 percent nitro wear down my engine faster or no because I wanna try and make my own too.
@thebug4046
@thebug4046 3 жыл бұрын
It will make no difference in engine life lack of tuning and Improper brake in will keep in mind nitromethane is not a lubricant this is just like 2 stroke gas the oil in the fuel is the lubricant
@evanmeneilley3228
@evanmeneilley3228 3 жыл бұрын
Ever used VP M1?
@thebug4046
@thebug4046 3 жыл бұрын
Yes M1 the best methanol to use. Sadly it is difficult to get in my area because we do not have any VP dealers around here
@Crawlerworkz2023
@Crawlerworkz2023 3 жыл бұрын
Bro traxxas is the fastest name in Rc .....😂
@thebug4046
@thebug4046 3 жыл бұрын
🤣🤣🤣🥔
@kelvincardona2397
@kelvincardona2397 3 жыл бұрын
Bruh 85 bucks a gallon for trash fuel YeA definitely the hell with that lol
@thebug4046
@thebug4046 3 жыл бұрын
Yup lol
@kelvincardona2397
@kelvincardona2397 3 жыл бұрын
The most Iv every paid was 34 for a gallon of Byron or vp
@thebug4046
@thebug4046 3 жыл бұрын
@@kelvincardona2397 it's 45 to 55 here
@kelvincardona2397
@kelvincardona2397 3 жыл бұрын
Sheesh that was NY prices so where you it’s more
@thebug4046
@thebug4046 3 жыл бұрын
@@kelvincardona2397 it's the way it is here unfortunately
@elmafiozadjnico3044
@elmafiozadjnico3044 Жыл бұрын
I need some help if someone can help me
@thebug4046
@thebug4046 Жыл бұрын
With?
@user-gp1sx7mr3e
@user-gp1sx7mr3e 3 ай бұрын
Lol the nitro IS needed I mix fuel for a living and nitro stabilizes the combustion. You can run two strokes on wd40 doesn't mean you should.
@thebug4046
@thebug4046 3 ай бұрын
Nope. you can buy 0% nitro at the hobby store all nitro engines originally ran on only methanol and castor oil aka glow fuel. Witch is only w ingredients. what makes up the bulk of the fuel. Aad holds the catalytic reaction with the platinum on the coil in the glow plug. Any engine can run on 0% nitro. In fact in cone racing they are restricted to only 0% nitro. They only started adding nitromethane in the mid 70s and a lot of Countries where nitro is illegal they burn 0% lol and running engines on WD40? I have tried and it barely ignites in normal gasoline engines. As it's mostly light Petroleum solvents similar to kerosene. Lol
Why Nitro Engines Outpower Everything Else
25:33
driving 4 answers
Рет қаралды 1,3 МЛН
When Nitro Engines go BANG!
13:08
xjet
Рет қаралды 237 М.
Bony Just Wants To Take A Shower #animation
00:10
GREEN MAX
Рет қаралды 7 МЛН
How I Did The SELF BENDING Spoon 😱🥄 #shorts
00:19
Wian
Рет қаралды 37 МЛН
Nitro fuel 0% nitro and gasoline and oils i use..
12:00
thebug 404
Рет қаралды 3,8 М.
The Wrong Way To Disassembled A Nitro Engine!
13:59
Haywire RC
Рет қаралды 1,6 М.
We Put NITRO R/C CAR Fuel In Our ACTUAL Car!
13:50
Novice Garage
Рет қаралды 582 М.
Making your own nitro fuel for RC motors. ( video 1)
8:17
Shane Cox
Рет қаралды 46 М.
Nitro  Myth busting! GLOW PLUG and what you should know
5:36
thebug 404
Рет қаралды 18 М.
How A Nitro Engine Works. Does Lefty Understand?
15:20
Invisible Speed RC
Рет қаралды 17 М.
RC Nitro Beginners MISTAKES & How to Avoid Them!
10:01
TheRCBiker
Рет қаралды 135 М.
Bony Just Wants To Take A Shower #animation
00:10
GREEN MAX
Рет қаралды 7 МЛН