No-weld panhard correction from DR.KDSS on 5th Gen 4Runner

Рет қаралды 16,823

Жыл бұрын

In this video, I will walk you through how I installed a panhard correction kit, from DR.KDSS, on my 5th Gen 4Runner.
Begin Disclaimer
This video is for demonstration purposes only. It is me demonstrating how I performed this modification. I make no warranties, nor do I take any responsibility for damage to your vehicle. Always seek advise or assistance from a trained professional.
End Disclaimer
Parts used:
DR.KDSS BOTCK- BOLT ON TRACKBAR CORRECTION KIT: drkdss.com/collections/pan-ha...

Пікірлер: 52

@ericksimms8147 10 күн бұрын

Excellent video! Straight forward explanation of what you are doing and why also your video work is clear and concise. Thank You.

@lamsterdam9302 10 ай бұрын

Thanks for the very detailed video. I just installed mines today (10-10-23) following your step by step and it worked out great. Drove it a few minutes over humps and uneven roads and notice the difference right away from previous drive without the correction kit. This is a must have. Thanks for putting time to making this video and thank you DR_KDSS for making this kit. 💯 👍

@rupertgumban9251 Жыл бұрын

Great detailed video,just got mine delivered from Dr.KDSS,I’m installing them today.Glad that you can install it without taking off the rear driver side tire..thanks

@ejones7589 Жыл бұрын

Thanks for the great video. I would suggest marking the bolts with a white paint pen (both on the bolt and surface they’re fastened to) to monitor if the bolts move or back-out.

@lucasr5675 Жыл бұрын

Good one! I just did one but opted out for welding it as you did on the 3rd gen. Seems like it works just as well.

@miguelantoniocoutochao4140 Жыл бұрын

Congratulations on your excellent and explicit video!!!!!

@user-rn5eh3yi9p Жыл бұрын

Thank you for the video. I installed this kit after a 2.5 inch Ironman Lift and the Panhard bar is back to level. It only takes about an hour. The kit itself is really high quality.

@stevejordan9567 13 сағат бұрын

How’s the Ironman lift working?

@tercan4783 7 ай бұрын

Very informative and straight forward. Thank you for the vid.

@AntonioClaudioMichael Жыл бұрын

I did the same 120ft for everything but panhard bar I did at 96ft also haven't had any issues

@hairydogstail Жыл бұрын

Well illustrated, thanks for sharing..

@AntonioClaudioMichael Жыл бұрын

This bold on Kit from Dr. KDSS for the 5th gen also works on 4th gens I Installed same kit on my v8 4th gen

@AntonioClaudioMichael Жыл бұрын

I got my correction kit for my 4th gen in red

@philn9205 Жыл бұрын

I heard if you have an adjustable aftermarket panhard rod, you don't need this. But I guess it's good to keep as close to OEM angles as much as possible.

@thorsky2754 Жыл бұрын

That is incorrect. The adjustable track bar will only recenter the axle, it will not correct the angle. I actually went through that first. After reading more I installed a panard correction bracket and it was a night and day difference over choppy roads.

@everydaybettereverydaystronger 8 ай бұрын

How much rear lift do you have?! Looks like 4" compared to my 2"

@jsonvillain Ай бұрын

Thanks for this....

@fltllc4136 Жыл бұрын

Thanks for the install video! This Drkdss just on my other account. ❤❤

@fltllc4136 Жыл бұрын

I need to update the videos again. Yes you are good with 95lbs on the main factory bolt location. But 125lbs on the rest. Honestly the loctite and some hash marks will be good.

@timbrown7980 10 ай бұрын

Hi thanks for the video! It helped a lot when I installed my kit. Do I need a wheel alignment after this and the other Dr.Kdss stuff is installed?

@climbgrenadiers8897 6 ай бұрын

Dr. KDSS says no.

@philipjohny5327 8 ай бұрын

Hi, I have a 2000 model Toyota Hilux Surf (also known as 4 Runner). After installing a 2-inch lift kit, I've noticed that the rear right side is lower than the left side, giving it a tilted appearance. Any suggestions on how to address this issue?

@user-kn7yz4vx2c 5 ай бұрын

Did anyone have problems with holes lining up?

@andrewhandrop1785 Ай бұрын

Does it fix the lean?

@kingbetong8741 Жыл бұрын

Will it hit the body when offroading or bounsing? Or do u need add bumpstop

@theoverlanded Жыл бұрын

I put longer bump stops on when I installed my lift.

@ryansixt7200 Жыл бұрын

Nicely done! How many inches from the middle of the original location to the middle of the new mounted location has it been raised on your setup (using the higher 2nd hole) and how many inches is the raise just to the first hole?

@theoverlanded Жыл бұрын

I didn’t take any measurements. I do know that the rear axle is now more centered to the vehicle with my 3 inch lift and HD springs.

@ryansixt7200 Жыл бұрын

@@theoverlanded Ah ok good math for y our 3 inch lift. thanks for that!

@chengsoung8907 Жыл бұрын

Great video. How does it ride now with the correction ? I’ve been thinking of doing this to mine.

@theoverlanded Жыл бұрын

The overall ride isn’t changed, other than eliminating the “bump steer” sensation. I definitely recommend some sort of panhard correction if you are running a lift.

@neillodge9130 11 ай бұрын

Great idea I'm in Australia and have a toyota prado 150 series which I lifted 50mm or 2 inch that is the same chassis as a FJ cruiser , will this kit fit my prado ?

@theoverlanded 11 ай бұрын

I recommend reaching out to DRKDSS drkdss.com/. They are very responsive.

@davissmagabo 8 ай бұрын

Very detailed and thorough install video. What are your thoughts on installing KDSS FRONT SWAY BAR END ADAPTERS & Front KDSS SWAY BAR OUTER BUSHING from DR. KDSS?

@theoverlanded 8 ай бұрын

My TRD Pro is not KDSS equipped, so I can’t comment on the swaybar adapters.

@pn312 Жыл бұрын

How lift are you running? Front and rear? Thanks

@theoverlanded Жыл бұрын

I have the ToyTec Boss Aluma Series 2.5 Performance Suspension System 3 inch lift.

@project_poor_runner Жыл бұрын

Great install video brother. Did you notice any difference in right hand curves while driving?

@theoverlanded Жыл бұрын

Before or after? No issues with right turns noticed.

@project_poor_runner Жыл бұрын

@@theoverlanded After. I my rig doesn't feel as planted on long right have curves at highway speeds. I'm wondering if the panhard correction kit would help that

@theoverlanded Жыл бұрын

I can’t comment on that, but if you’ve got a lift then I strongly recommend some sort of panhard correction.

@uplandwild4136 Жыл бұрын

What did you do with the ABS line?

@theoverlanded Жыл бұрын

I zip tied it. I think I showed that in the video.

@user-di1en8ld7i Жыл бұрын

What size is your lift on your 5th gen 4runner ???

@theoverlanded Жыл бұрын

I have the ToyTec Boss Aluma Series 2.5 Performance Suspension System 3 inch lift.

@--RSL-- Жыл бұрын

Maybe just tq bar to an even 100

@Driver_0ne Жыл бұрын

Are you lifted 3 inches in the rear also? Or is it 3 inches front and less in the rear?

@theoverlanded Жыл бұрын

I’ve got HD springs in the back, so a bit more than 3 inches.

@Driver_0ne Жыл бұрын

@@theoverlanded thanks

@mysteriousoklahoma777 5 ай бұрын

Still looks like the bar should be adjusted higher by Dr.KDSS.

@wrm787 5 ай бұрын

The things the shop DOES NOT tell you when you get a lift kit installed. So glad I stumbled on this video! In your honest opinion, what is the worse case scenario if you do not do this install on a lifted 4Runner? I currently run the BP-51s and 285s and obviously stock panhard hah!