Noise from something loose or scraping!? Timing chain for all 1.3 mjet engines for all years

Рет қаралды 24,976

Жыл бұрын

Hello guys! This video covers all 1300cc engines of all years and all brands that use them: Alfa Romeo, Lancia, FIAT, Susuki, Opel, among others. Every approximately 200,000 km you should pay attention to certain signs of noise like this one, which are not so obvious. Errors related to motor lack of synchronization also indicate that the chain has already passed its physical limit. It's replacement must be immediate, as well as all the cleaning of all parts and surfaces.
If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
--------------------------------------------------------------------------------
PayPal link to help my channel:
www.paypal.me/alfaromeonoproblem
Support the channel via MBWay: (+351)913225320
Patreon link to help my channel:
/ alfaromeonoproblem
--------------------------------------------------------------------------------
Problems and solutions for the crankshaft pulley and belt:
• Belt squealing? What a... and • Crankshaft pulley fail...
All Videos for Alfa Romeo 164 and 166 V6 Turbo Busso 2.0L:
• Behind the scenes, Alf...
Timing belts\chains How to:
• Alfa Romeo 155 1.9td t...
Alfa Romeo owners in need of help! I try to:
• Car sold with warranty...
Alfa Romeo Experts in Potugal (so far):
• New series! Alfa Romeo...
Ac Sytems, faults, solutions ans tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspension:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Timing chain part number: Dayco KTC1098
oil injector, bolts, crankshaft bolt, and flange are sold separately on the dealership only.
oil actuator seal also required
Where i do my research of parts: www.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-fcadealer.pt/co... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
Alfista salutations!
#AlfaRomeo #alfamito #AlfaRomeoNoProblem

Пікірлер: 122

@fishbrrr 9 ай бұрын

Wow, thank you so much for that! Great video, actually the best thing I've found on KZfaq so far! Best regards and thank you again!

@alfaromeonoproblem 9 ай бұрын

Thank you very much for watching and for your support! A new video every Saturday morning

@chrissavage5966 Жыл бұрын

The Haynes manual would class that as a '5 spanners' job I think ;) Enjoyed the in-depth video and all the tips.

@alfaromeonoproblem Жыл бұрын

Thank you very much for watching!

@Tolis-py2dc Жыл бұрын

If I could hit the like button ten times,I would.Thank you Bruno.The worst thing about this engine is that we don't know who designed it,so we can give him the credit he deserves.I also think that there is a kit with which you can even change rockers

@alfaromeonoproblem Жыл бұрын

Hello. Thank you very much! Thank you very much for your support. The engine was a join venture with GM.

@dannydkasel8296 10 ай бұрын

that's what modern mechanics never learn .... PASSION ... it's so heart warming to see, this kind of passion of working 🙂

@alfaromeonoproblem 10 ай бұрын

Thank you very much for watching and for the support

@sonnyl4751 8 ай бұрын

I can't thank you enough for this video. This job took me 2 days as a hobby mechanic . Challenging was finding the torque wrench for left hand thread on the crankshaft. I ordered the dayco ktc1118 kit . this kit included the bolts ,except the oil pipe bolts and crankshaft flange.

@alfaromeonoproblem 8 ай бұрын

Hello. Thank you a lot for watching the video! And thank you for sharing that info!

@RandomYTStuff Жыл бұрын

Excellent, informative video Bruno. well done.

@alfaromeonoproblem Жыл бұрын

Thank you very much for watching

@mihovilcota8761 9 ай бұрын

Thank you very much for this awsome video

@alfaromeonoproblem 9 ай бұрын

And thank you very much for watching!

@kimon850 9 ай бұрын

Great video!!!well done

@alfaromeonoproblem 9 ай бұрын

Thank you very much for watching!

@PinnacleControlSystems 4 ай бұрын

Very detailed video and provides precise insight into what is involved when changing/servicing the timing chain on this particular engine. 👍

@alfaromeonoproblem 4 ай бұрын

Thank you very much, appreciate it

@petermastenbroek7719 9 ай бұрын

You really are an excellent mechanic and a very good teacher too, as you were able to explain everything very well. Thanks a lot for this great video.

@alfaromeonoproblem 9 ай бұрын

Thank you very much for your kind words. Gives me purpose to carry on

@momomalik1808 Ай бұрын

Bravo👍👍

@hakanyoyen5773 7 ай бұрын

Thanks for the great informations mate! I've Aveo/Sonic 1.3 diesel 95 hp. Basically same engine. I'm gonna replace my timing chain after 18.000 km. This video helped me a lot!

@alfaromeonoproblem 7 ай бұрын

Thank you very much for watching! I'm very glad the video helped

@asscracbelfrage 6 ай бұрын

I'm sorry but I must point out one thing. Never lift this engine on the sump, it's super sensitive, slightest dent and it can couse a low oil preasure and that is super hard to locate since you can't spot the dent with your eyes, it needs to be meassured to be discovered. I did it myself and spent a lot of time after chainging the timing chain figuring out what was wrong, I only run it for a few minutes but that was enough to mess up the turbo. During my search for the problem I only found one single line about this on google, only one, some guy having the same issue and that was the reason. And I was very careful while lifting the engine, still this happened.

@alfaromeonoproblem 6 ай бұрын

Hello. Thanks for the heads up. I am fully aware that. That's why I did it from the corner and only with the engine mount off. I did forgot to mention it. Also I did reform the bottom a bit before going back in. In a future video I will talk about that. Thank you

@paulas2610 6 ай бұрын

@@alfaromeonoproblemPlease do as I’m fascinated as how that cane be a thing.

@alfaromeonoproblem 6 ай бұрын

Ok, I will. Did it also on my 33

@yigitaliilesporadogru8574 14 күн бұрын

Çok teşekkürler müthiş bir işçilik keşke daha detaylı görüntü olsaydı

@DashCamSerbia Жыл бұрын

Amazing job. Hope you get paid well for it.

@alfaromeonoproblem Жыл бұрын

Hello. This one not so much.. the tool kit was a bit expensive

@neiljohnson9537 7 күн бұрын

Awesome video. A model of how to make a video tutorial 👍

@alfaromeonoproblem 7 күн бұрын

Thank you very much for your support

@djlosmi Жыл бұрын

Brilliant video! It's a joy watching you do the job properly! 👏 P.S: 43:12 I think the pads are not mounted properly, the outer ATE pad says "PISTON", which should be inside and not on the outside. Correct or I am imagining it? :D

@alfaromeonoproblem Жыл бұрын

Hello. How are you? Thank you very much for watching! You are correct, aldo the ware signal wire seems correct because it is on the inside pad. Maybe. A miss print or the signal wire is in fact on the out pad. Is not very critical on small brakes like this.

@richdespiseus6243 21 күн бұрын

At 17:30, what socket was used to undo the crank bolt? Polydrive / RIBE sockets don't exist because the bolts are supposed to be tamperproof.

@alfaromeonoproblem 20 күн бұрын

E18 torx bolt. You can find all kinds of ribe bits and sockets on your local workshop tool shop

@memegoats. 3 ай бұрын

👍🏻👍🏻👍🏻👍🏻

@paulas2610 6 ай бұрын

Brilliant video, such detail and well edited. I’m curious as to know how suspended carbon particles can stretch a chain that was designed for a diesel. Fiat have been making engines for a very long time and should have known what chain was suitable. Do you think halving the oils change intervals is going to help much?

@alfaromeonoproblem 6 ай бұрын

Hello. All modern engines suffer from this. They have to make lighter engines and engine components to meet emissions. That and too long intervals on services will kill any engine

@paulas2610 6 ай бұрын

@@alfaromeonoproblem Thank you. Any explanation on the reason why a slightly dinted sump might cause issues on the fiat engine please?

@alfaromeonoproblem 6 ай бұрын

@paulas2610 yes. The oil pick up tubo bends and the seal near the oil pump lets air in.

@c111prs 2 ай бұрын

Good video well done, where can I find all the torque settings for everything you tightened up ,regards

@alfaromeonoproblem 2 ай бұрын

Hello. Thanks for watching. You can see that on Autodata or workshop. Also on elearn from fiat

@FlashFireSix 5 ай бұрын

Really great video, I've got to do this on a 1.3cdti in a chevy aveo, this is the only video I can find on the subject as you can imagine there's not many chevy aveo enthusiast forums. It's got low oil pressure so I'm thinking there's some plastic guide parts blocking the pump as the timing chain is also due replacement. What bit do you use to remove the cam timing covers? Is it 8mm hex? I need something really low profile as there's less clearance on my configuration.

@alfaromeonoproblem 5 ай бұрын

Hello. How are you? Thanks for watching. Can you tell me at what minute of the video are you referring to?

@FlashFireSix 5 ай бұрын

@@alfaromeonoproblem It's 9:52, I can hear you say 8mm and it looks like it's a hex bit but not sure

@alfaromeonoproblem 5 ай бұрын

Yes, its a 8mm hex. Just like on this video kzfaq.info/get/bejne/qZeGnNp8rZq7YaM.htmlsi=n_6iXOGzPKwWlooN

@FlashFireSix 5 ай бұрын

@@alfaromeonoproblem nice one thank you

@FlashFireSix 4 ай бұрын

@@alfaromeonoproblemI’ve removed the pump now, and it looks okay, so does the timing chain and all the guides are intact. It’s a slightly different pump that doesn’t have variable flow but there was nothing blocking any channels. There seemed to be oil reaching all the right places as it drove quite a distance before getting to me with the low oil pressure light on, is there anything you can think of that would cause oil to not reach the pressure sensor properly? It’s had two sensors and I’ve tried a mechanical pressure gauge which reads zero so I’m quite confused what could be happening

@mihajlom6793 11 ай бұрын

hi, maybe you can help me, I have a problem on the alfa romeo mito, the right dipped beam doesn't work, I changed the light bulb, are there separate fuses for dipped beam if you know? Thank

@alfaromeonoproblem 11 ай бұрын

Hello. For the main bulbs normally there is a fuse for each bulb. Low beams, hi beams, fog lights. And more. When a bulb goes out it can take a fuse with it

@alessio684 11 күн бұрын

Hello man, first of all congratulations for the quality of the work and the amazin contents you bring to the channel. I'm also doing a chain for a 1.3 multijet but when I put the block in the camshaft the block in the flywheel doesn't fit and is two teeth further forward. In this case should I remove the chain and move the camshaft or the lower one back? Thank's so much. Love from Italy

@alfaromeonoproblem 11 күн бұрын

Hello. Thanks for watching. It's a bit common. Don't worry, lock the crankshaft, take out the chain, rotate the camshaft until you lock them in

@alessio684 9 күн бұрын

@@alfaromeonoproblem the problem now is that the camshaft broke while I was unscrewing. there was the block but it gave way and broke the camshaft

@alfaromeonoproblem 8 күн бұрын

@alessio684 yes, ir does that. Now you have to replace them.

@matiasmillar6670 7 ай бұрын

Hola excelente vídeo, tengo una fiat Fiorino tiene el mismo motor 1.3, se la quiero cambiar por km pero igual nose si sera el problema, le cuesta partir por las mañanas tiene las bujias incandescentes nuevas bateria nueva, motor de arranque le ismos mantenimiento, pero en las mañanas es un terror darle msrcha , le cuesta partir y aparte humea arto blanco pero solo en las mañanas algun consejo suyo lo agradecería 👋

@alfaromeonoproblem 7 ай бұрын

Hello. Can you translate to English or portuguese please?

@Alfio67 7 ай бұрын

Ciao ti scrivo sto facendo la catena ad una Mito 1300 Multijet 62 kW il bullone centrale della flangia a quanti Newton va stretto?

@alfaromeonoproblem 7 ай бұрын

Hello. The center bolt is 110nm

@diego16160 Жыл бұрын

Can you recommend any aftermarket chains for this engine? Because genuine one is really expensive. Great video and info!

@alfaromeonoproblem Жыл бұрын

Thank you very much for watching. I will put the Dayco part number on the description below. Thanks for asking

@diego16160 Жыл бұрын

@@alfaromeonoproblem Thank you for the quick reply. The timing of this video is just right for me, as I was thinking about which chain to order today.

@alfaromeonoproblem Жыл бұрын

Thank you very much! You can also purchase INA.

@diego16160 Жыл бұрын

@@alfaromeonoproblem Thanks again for the suggestions. Your videos are very helpful. I will probably get Dayco because you used it!👍👍👍

@alfaromeonoproblem Жыл бұрын

I prefer Dayco too

@alexsep4359 11 ай бұрын

Hola amigo. en mi caso quiero felicitar, exelente video. Gracias por tomarse el tiempo de hacerlo. amigo en mi caso tiene el mismo ruido pero solo es cuando ya a tomado temperatura. tengo 100. 000 kilometros. crees q este comenzando a fallar la distribucion. Gracias

@alfaromeonoproblem 11 ай бұрын

Hello. Thanks for watching. If you have a noise please do not risc it! Make sure to use his quality parts too. If you want, I have my channel all in Portuguese, it may be easier for you. Maybe.

@alfaromeonoproblem 11 ай бұрын

My Portuguese channel youtube.com/@brunocrespo

@mikewinstone7361 2 ай бұрын

Everything that is said by the comments true, best have see. Not done any work on engines for about 30 years but have changed Timing chain with all your help 😊

@alfaromeonoproblem 2 ай бұрын

Thank you very much for your kind words. I'm glad it was helpful! Share with your friends please

@mikewinstone7361 2 ай бұрын

I am ready to remove Crankshaft Star nut got Camshaft locks but can’t find Crankshaft locking position, is it under the Sensor on a Peugeot Bipper 1.3

@alfaromeonoproblem 2 ай бұрын

@mikewinstone7361 can you confirm if it is a fiat or Opel gearbox?

@mikewinstone7361 2 ай бұрын

@@alfaromeonoproblem didn’t find it but marked Starter ring now all completed and running smoothly Thanks for your help🙏

@edoardo120 5 ай бұрын

Hi, where did you get the red tool to remove the oil pump flange?

@alfaromeonoproblem 5 ай бұрын

Hello. I made it.

@edoardo120 5 ай бұрын

@@alfaromeonoproblemhow tight have you tightened the flange bolt?

@alfaromeonoproblem 5 ай бұрын

@edoardo120 like 300 or something

@jasperdesi5089 6 ай бұрын

Great video .I just did my 05 corsa by watching this. All back together but now wont start. sounds like starter not turning engine but have seen the belt moving when turning the key. Have I left something disconnected ? Any help would be appreciated.

@alfaromeonoproblem 6 ай бұрын

Can you turn the engine easily by hand?

@jasperdesi5089 5 ай бұрын

I can turn the engine. At a loss as to what i did wrong? It does not even try to start@@alfaromeonoproblem

@jasperdesi5089 5 ай бұрын

Thanks for the reply ..

@alfaromeonoproblem 5 ай бұрын

@jasperdesi5089 but does it spin freely?

@jasperdesi5089 5 ай бұрын

@@alfaromeonoproblem I can only turn it with a ratchet , not sure if I would say it easily. I do have to apply a bit of pressure .

@ZokiZoki22 2 ай бұрын

Great video. I am looking to buy Fiat Evo with this engine. Would you recomend it or should I avoid it? I see a lot of positive for this engine but I am not sure.

@alfaromeonoproblem 2 ай бұрын

Hello. Is no speed demon like the 1.6 one, but is a good honest engine, regular oil changes is the best for it.

@ZokiZoki22 2 ай бұрын

@@alfaromeonoproblem Thank you. I don't need speed demon haha just a good reliable engine. I had fiest 2002 1.4 16 and it was nightmare for me maybe I had bad luck. Thank you once again. Subscribed by the way :)

@alfaromeonoproblem 2 ай бұрын

@ZokiZoki22 thank you very much. This is better, no doubt

@cristianhorumba6873 Күн бұрын

hello, I follow you every time, what you do is perfect, I also have a doblo 1.3 mjet 84 hp and I suspect low oil pressure, now I don't know if that's the case, maybe you can help me. cold 3.5 bar at 34 degrees outside / when it warms up to 80-90 degrees, the engine at idle is about 1.2 bars and at 2000rpm it has 3 bars and at 3500 rpm it does not exceed 3.5 bars. is it ok?

@alfaromeonoproblem 9 сағат бұрын

Hello. That numbers are good, don't worry

@cristianhorumba6873 9 сағат бұрын

@@alfaromeonoproblem Thank you very much for the answer.

@rubenbroex3338 3 ай бұрын

Hello, very nice en useful video. My mito 1.3 always have a kind of raw start. It runs not nice and gives some blue smoke. It disapears after 5-10 sec. I already changed the glowplugs but it wasnt the problem. Can you help me? Thanks

@alfaromeonoproblem 3 ай бұрын

Hello. Please check out today's video for that please

@rubenbroex3338 3 ай бұрын

@@alfaromeonoproblem thanks mate, is it possible to refurbish or clean the injectors by yourself?

@alfaromeonoproblem 3 ай бұрын

@rubenbroex3338 hello. No, it is not. They always need recalibration afterwards.

@rubenbroex3338 3 ай бұрын

@@alfaromeonoproblem can you also not change only the needle?

@alfaromeonoproblem 2 ай бұрын

@rubenbroex3338 no, mainly that!

@seyid_can 7 ай бұрын

Hello, good luck. Is there a video of the 1.3 Euro 4 engine? Can you make a video, thank you 🚗

@alfaromeonoproblem 7 ай бұрын

Hello. A video for what issue?

@ericcartmansn4737 3 ай бұрын

the engine looks euro5

@ericcartmansn4737 3 ай бұрын

I did not changed my timing chain and my car is at 200k kms

@alfaromeonoproblem 3 ай бұрын

@ericcartmansn4737 hello. Try to hear the chain, it may start to rattle now. If not, don't mess with it

@15DAVIDYOUNG 4 ай бұрын

Hi, I've had my 1.3mjet for four years and every year the chain has started to rattle and I've had to replace the kit, is there any reason for this as I'm very fed up now, many thanks

@alfaromeonoproblem 4 ай бұрын

Hello. Low quality chain sets will do that. Is very common

@15DAVIDYOUNG 4 ай бұрын

@@alfaromeonoproblem many thanks, do you have a particular brand that you use? I've been fitting the FAI kits over hear in the UK, was told they are pretty good🤔

@alfaromeonoproblem 4 ай бұрын

@15DAVIDYOUNG those are the worse ones that you can use.. Ina or Dayco only. No autodoc

@15DAVIDYOUNG 4 ай бұрын

@@alfaromeonoproblem thank you, its normally the tensioner itself that is the problem, I only just noticed that they have a small hole in the back to let oil flow but in my opinion that's going to allow the oil pressure to leak off and put all of the effort on the tentioner spring, do you have a link please

@alfaromeonoproblem 4 ай бұрын

@15DAVIDYOUNG a link for what?

@paulas2610 6 ай бұрын

Why do these engines have such rusty sumps?

@alfaromeonoproblem 6 ай бұрын

Hello. On the outside? They are very exposed to the elements and to road debris