How To Replace Window Motor/Regulator on 2012-2016 Honda CR-V

Рет қаралды 26,865

Күн бұрын

Fast instructions on how to remove the door panel and replace a window regulator on this 2014 Honda CR-V. This is the Driver front but same for passenger side also.
On Amazon:
*DRIVER FRONT: amzn.to/3xG0a4z
*PASSENGER FRONT: amzn.to/3nCudWb
*TRIM REMOVAL TOOLS: amzn.to/3e8TkNa `
~~~~~Help Support the Channel Below~~~~~
~Subscribe Here: kzfaq.info...
~Follow on Instagram: / nononsenseknowhow
~My 2nd Channel For Everything Else: / @nnkh2
~Shop on Amazon from this Link: amzn.to/2uDE6eT
~My Gear/Tools on Amazon: amzn.to/36S6J6s
*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other AWESOME Channels You Should Check Out:
~South Main Auto Repair LLC: / @southmainauto
~BleepinJeep: / bleepinjeep
~Project Farm: / @projectfarm
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Essential Craftsman: / @essentialcraftsman
~EricTheCarGuy: / ericthecarguy

Пікірлер: 31

@NoNonsenseKnowHow 3 жыл бұрын

On Amazon: *DRIVER FRONT: amzn.to/3xG0a4z *PASSENGER FRONT: amzn.to/3nCudWb *TRIM REMOVAL TOOLS: amzn.to/3e8TkNa

@LetsChat 3 жыл бұрын

Oh yea. I wanted to leave you a meaningful comment. I drive a Chevy sonic and had a failing coolant manifold. I live out in the middle of nowhere near a research facility so I had to rely on some DIY skills. I had the part mailed to me and used your videos to do a painless swap. What I really appreciated was the detailed process of dismantling the various connections, clips, and pins. Thank you for that, I couldn't find that detail anywhere else. My car is working wonderfully again and it's a big relief off my mind and a feather in my cap! Thank you for your time making these!

@NoNonsenseKnowHow 3 жыл бұрын

Hey man awesome to hear the video helped out and I really appreciate you leaving a comment with your experience. Thanks!

@andreakeeling9217 3 жыл бұрын

That’s a lot of work. Now I won’t complain when I pay someone to do this for me. 🙃🙃🙃🙃🙃

@Rick-4552 3 жыл бұрын

The suction cup idea on window is brilliant, I will be using that trick

@HipHopBeatSource Ай бұрын

Great video. Thank you so much for posting this.

@NoNonsenseKnowHow Ай бұрын

Glad it was helpful!

@noeramirez4975 24 күн бұрын

Excellent video, thanks

@BigBadReaper Жыл бұрын

YOU SIR.... Just got a new follower

@JohnDNichols 2 жыл бұрын

Great video! Thanks for the help

@russdory1081 2 жыл бұрын

thanks, didn't break any clips except the zip tie one. would have broke many without u.

@bitemefoker 2 жыл бұрын

any idea if the 2017 model is the exact same setup>?

@downstateradv 3 жыл бұрын

Good stuff as always

@NoNonsenseKnowHow 3 жыл бұрын

My man. All that talk about the cantina, you got me in the mood making a margarita over here now. Lol

@chilee6614 11 ай бұрын

Thank you. 😊

@clarencewiles963 Жыл бұрын

Thumbs up 👍 clean and go 😊

@leepeter6304 2 жыл бұрын

Thank you for the vid saved me ££££'s

@xKMA371x Жыл бұрын

Just a question?. Why does my Crv drivers window Regulator keep having to be changed going on 2 times now.. With in almost 4 yr period? 2016 35,000 miles on Crv. Both times dealership replaced. Window Squeak.

@stephaniesimpson8559 Жыл бұрын

What did you use to clean it?

@JohnLittleton-iw5gu 2 ай бұрын

Can you just buy and replace the motor on the regulator?

@syynrg3771 3 жыл бұрын

Hey, what if the window is all the way up? How would I bring the regulator down to unscrew the two 10mm

@NoNonsenseKnowHow 3 жыл бұрын

I would have to be looking at it or look back at the video to give you a solid answer. Sometimes you can cut the cables, or loosen up the other bolts and you can get the window down. Or other times just jump the motor with higher than 12 volts and it will work. Or try tapping it with a hammer when you're jumping it

@NoNonsenseKnowHow 3 жыл бұрын

Whatever you got to do to get it down I suppose. Without breaking the window

@syynrg3771 3 жыл бұрын

@@NoNonsenseKnowHow oh that would make sense, if i unbolt the regulator the window should come down low enough to get the bottom 2 10mms

@brucegardner7630 3 жыл бұрын

Good video

@NoNonsenseKnowHow 3 жыл бұрын

Thanks Bruce

@brucegardner7630 3 жыл бұрын

@@NoNonsenseKnowHow hey,I just wanted to ask you about the video you did on the SHIFT TO PARK on the Malibu. I have a 2018MalibuLT and I took my console apart a couple of weeks ago when I saw the video and I bent that lever and then things were OK for awhile . Now I'm having the same problem with the SHIFT TO PARK again. Should I just get a new SHIFTER? And how much are they.?

@NoNonsenseKnowHow 3 жыл бұрын

@@brucegardner7630 I would try putting a little piece of hose on it to shim it. Or just get rid of the switch altogether. Bypass it

@brucegardner7630 3 жыл бұрын

Ok thanks