No video
NonTouchbar USB - C Replacement : Easiest Method (MacBook Pro 2017)
Рет қаралды 7,221
Күн бұрынThis is how we replace USB-C port on Non-touchbar Macbooks in less than 10 minutes of steps without causing any plastic to melt because of excessive heat.
Let us know your thoughts in the comment and thanks for watching!
Contact Us:
/ logicboard.macbook
main.iboff@gmail.com
@WillianEdits 3 жыл бұрын
Hi I wanted to know if I were to send you my MacBook Pro 15” 2018, would you be able to upgrade to 64gb ram? And for how much?
@ictrepairs6963 3 жыл бұрын
How could you melt a lead free solder with 219^? Very impressive.
@iBoffRCC 3 жыл бұрын
The thing is like this, 219C is the melting temperature of Lead-Free solder. we put lower IR heater at 150C, and upper hot air gun at 400C. we control the heat by moving the handheld Hot air gun back&forth to heat up the local area to 219C. The advantage of this method is that you use two heat source to reach 219C, & heat will spread even better through the whole board VS applying excessive heat from 1 source(hot air) to reach 219C that can easily melt surrounding FPC connector and plastic.
@rystih.h.n.5831 3 жыл бұрын
Workshopnya dimana nihh?
@iBoffRCC 3 жыл бұрын
Selangor, Malaysia
@Folckey1 3 жыл бұрын
Where can i find the replace piece?
@iBoffRCC 3 жыл бұрын
ebay or from China supplier
@afq.familyvlog 3 жыл бұрын
Hi. I just want to ask. Is it possible to upgrade the soldered 8gb ram from macbook pro 13 2020 to a 16gb ram?
@iBoffRCC 3 жыл бұрын
Sorry sir, for the current moments the upgrade is not available yet. Still in our R&D.
Electronics Repair School
Рет қаралды 19 М.
What the Meowk!
Рет қаралды 9 МЛН
iBoff RCC
Рет қаралды 708 М.
iBoff RCC
Рет қаралды 41 М.
TronicsCenter
Рет қаралды 16 М.