PIONEER LASER DISC CLD-V2600 WONT LOAD / CLAMP DISC INTERMITTENT PLAY. NO PARTS REQUIRED REPAIR.

No video

PIONEER LASER DISC CLD-V2600 WONT LOAD / CLAMP DISC INTERMITTENT PLAY. NO PARTS REQUIRED REPAIR.

Рет қаралды 10,559

3 жыл бұрын

A vintage laser disc player that plays a 12 inch disc (these were around long before DVD's). It was brought in for an intermittent no play condition and upon closer inspection I determined that it just needed the loading, sled belts and assiocated pulleys cleaned and deglazed with ACETONE, yes it is safe for belts as I have been using it since the early 80s. I hope you enjoy this video.
If you would like to support my video efforts please consider making a donation at www.paypal.me/... Remember with your help we can keep these things out of the landfill, the E-Waste, and out of the recycle bin! Thanks for watching.
A special thanks for all
who have contributed
to my video efforts!
Heath Lasswell
Erick Pastor
Michael Dukes
Dot Morgan
Casey Cane
Teri DeLeo
Kelly Knutson
Howard Goble
Diana Williams
Reed Graham
Christopher Wang
David Ammerlaan
John Johnson
Scott Kullen (thanks for monthly support)
Shaheed Amirkhan
Brett Sherry
Joseph L Ozvold
Sweidan Omar
John Eggers
Linda Kuo
Daniel Pyles
Melanie Branton
Lisa Sklar
Barry Marchant
Uri Cohen (multiple times)
Scott Kullen
John Harper
Larry Mcdonald
Annette Lewis
Howard Goble
Hugo Tajimaroa
M R Rajesh
Dan Latorre
Follow me on social media:
Facebook, Instagram, Twitter
@NORCAL715
Email me at NORCAL715videos@gmail.com

Пікірлер: 45

@doctorjohn-burgtekie 3 жыл бұрын

If I had the time I would watch your videos all day long, knowledge is a good thing.

@stopframe1321 10 ай бұрын

Thank you! Due to your video explaining to clean the lens and infra-red detector, I now have a fully working LD player!

@RoughJustice2k18 3 жыл бұрын

No parts or re-alignment needed; if only all repair jobs were that quick and easy! Once again you have saved this one from possible land-fill.

@jeffreypage2930 Жыл бұрын

Thanks for this! My vintage 1994 Pioneer CLD-D503 is working again. Who knew that a little Windex and acetone could work such magic.

@MrChicken87 Жыл бұрын

Oh that worked better than expected. Thanks

@Sega_is_all_i_cd 8 ай бұрын

3 years later from the time you uploaded this video originally….your video helped me with a Pioneer Laserdisc CLD-V850 that I found recently at a thrift store. When I tested at the thrift store it was making that grinding noise coming from the motor(I recognized that sound from my Laseractive). And since I recognized the noise when I tested it at the thrift store I still bought this laserdisc player. Got it home and it was having the issues as in this video. Did the belt n laser cleaning and that fixed it. Thank you. Happy holidays!

@krellft 3 жыл бұрын

Brilliant ... that bought back good memories ... I did exactly the same cleaning methods, back in the early 90's, when I had my own repair workshop ... those type of repairs were easy money ... damn I miss those days ...

@TheLastRealJEDI 4 ай бұрын

Acetone?! Are you out of your mind? ... I'm just kidding. Great video. I love that the remaining LD players are treated like this!

@skullen2286 3 жыл бұрын

Acetone is truly magical, as are your skills, sir! 😁👌

@gleisonnascimento2048 Жыл бұрын

Great job man! Thanks a lot for your big help. 👏👏👏👏👏

@polaris911 3 жыл бұрын

Nice machine, satisfying watching you fix it back up. Definitely going to try acetone on my belts.

@Huzzunga 2 жыл бұрын

A friend called for me to come look at his. Hopefully it’s the same Pioneer or at least a Pioneer. Or similar mechanism set up loading small tools and heading over now. Thanks for the tips

@WillFromWithin 6 ай бұрын

Thanks! ❤

@troymeredith521 2 жыл бұрын

Great video. Wish my issue was as simple as this. Same laser assembly but a different model. Tries to read a disc, but stops, yet recognizes CD/LD and if LD is on Side A or Side B. I sent a message on Twitter if you're willing to take a look.

@keithpetrino 10 ай бұрын

I would use lighter fluid for cleaning belts and internal parts instead since it's safe on plastics. While acetone is probably ok with rubber belts and those nylon pulleys, it will damage any ABS parts that may be in the machine, so I'd be careful despite your 40-year lucky streak.

@electropatagonico 3 жыл бұрын

nice work! A little bit of love and there it goes!

@johanferozco 3 жыл бұрын

Thank you so much! I have a CLD-D701 that would not detects CDs or Laserdisks after being in storage for 8 years. I cleaned the sensor and the laser and the problem was solved. The only thing I need to do now is fix the loading system where the tray hesitates to fully open the outer lid. I have to manually help the system open that lid to the tray can come out. As soon as I get some acetone, I will inspect those belts and clean them. Thanks for your video, first time I see you. Ive just subscribed.

@oblioi 3 жыл бұрын

Another one kept from the land fill :o)

@yupimbackk 3 жыл бұрын

I love youre vids so much.

@MarcosAlmeidaNet 3 жыл бұрын

Actually, the infrared sensor is not used for disc recognition. This is the TILT sensor. There is a TILT motor to adjust the whole mechanism to prevent crosstalk as the disc is read.

@norcal715 3 жыл бұрын

I thought the optical pickup used a jitter in the eye pattern to detect tilt. That is how I was taught to adjust later model DVD players anyway, plus I have had that IR diode set dirty and not detect a disc. I will definitely look into it. Thanks

@MarcosAlmeidaNet 3 жыл бұрын

@@norcal715 , Thank you! Love your channel!

@cozzm0AU Жыл бұрын

With my new found love of Laserdisc Players, i have found my fair share of dirty belts. I am wondering if in your experience, do the optics below the main lens get dirty/covered in a any kind of 'film'. I have found a number of players i have acquired do have a visible red laser glow, but do not recognise a disc even after gentle cleaning (and tweaking the laser diode intensity pot). Perhaps it is the detector that is faulty and not the Laser emitter? (not looking for a 'fix'), just wondering if you think the optics inside the sled could be contributing to a failure to recognise a disc. I did try ultrasonic cleaning the whole sled assembly in IPA without change function (figured it couldn't hurt to try!) Thanks again for your videos, old and new!

@daniilc6758 Жыл бұрын

Hello . Loved the video. Tried on pioneer ld player with same problem. Cleaned the belts and lens. It's still won't spin. Any suggestions, please

@SuperMitchell54 3 жыл бұрын

Hey can you please help me I have a laserdisc player pioneer cld 606d laserdisc tray won’t open and I get a loud hum eo display msg help

@dennisfuhrman7816 Жыл бұрын

I have a cld-53. I cleaned the laser, changed the loading belt, and it now loads and the motor starts. In about seven seconds the motor turns off and the disk coasts to a stop. I checked the clamping mechanism and observed no defects. What should I look for next?

@barryg41 3 жыл бұрын

Acetone cleaning agent: 8675309 Other agent: 0 🙌🇺🇲🙌

@norcal715 3 жыл бұрын

That's Tommy Tutone's Jenny!

@davidarveyo8363 3 жыл бұрын

Could start a drinking game, every cap that tests bad take a shot or every time acetone is used take a shot. Just a suggestion Yea

@tannerkarm3406 2 жыл бұрын

DO you still do this and if so do you have a website , I just got a pioneer cold 2080 and need it cleaned and possibly fixed

@norcal715 2 жыл бұрын

email me norcal715videos@gmail.com

@davidgiordano7259 Жыл бұрын

Can we send you laserdisc players for repair?

@gillanland 3 жыл бұрын

Why are you using acetone but not isopropyl alcohol? Thank you.

@josegti84 3 жыл бұрын

IPA 99% is definetely safer on rubber belts and is just as efective for servicing belts. But there's something even better and 100% safe on rubber parts... platenclene. It's used for cleaning the rubber rollers on printers. I use it to clean belts, pinch rollers... and it works fantastic.

@ugotmaill 2 жыл бұрын

Hi, My Pioneer laser disc CLD-S303 still has a no disc after I watch your video cleaning the belt and sensors. Do you have any idea where I should look at it too? thanks

@norcal715 2 жыл бұрын

Will it play a laser disc , but not a CD? or play a CD, but not a laser disc?

@ugotmaill 2 жыл бұрын

@@norcal715 no it won’t play the lazer disc at all after loaded and said no disc. I don’t care CD player work or not, last time was used over year ago just fine with karaoke lazer disc…. I hate to see it go to land field.

@daltonmccord8377 3 жыл бұрын

Yes, I have a pioneer laserdisc cld-1080 it will play certain laserdiscs just fine and load them/play them perfectly. Others it will not. Jurassic park, Independence Day won’t play them at all. Says play then immediately says stop. Also won’t play cds. What does it need? What’s should I do?

@norcal715 3 жыл бұрын

Look at the disc label and see if some discs are CLV and others are CAV format (constant angular velocity, and constant linear velocity) Is that the common denominator?

@andygoss3117 3 жыл бұрын

Will you fix my UHD bluray player??

@lisaoliveros5245 2 жыл бұрын

Cld-D604 error code u1

@ggsumner1947 2 жыл бұрын

"What About Bob" is in my opinion, one the worst movies ever made. I rented this movie on VHS years ago, and about half way through it, my late wife asked me if I had seen enough. I had. Steve, your repair is spot-on though. My wife's cousin bought one of these when they first came out, and we were invited over to watch "Romancing The Stone". I didn't care for it either.

@seminiferousbuttnoid 2 жыл бұрын

Sir, I recognize your game and it's clear you've been bought and paid for by Big Chemical. Who is paying you to make these acetone propaganda videos? Dow? 3M? Dupont? I don't even think we've scratched the surface...