Great job explaining your steps. One of the better videos I've watched.

I just bought that blower for $149 from Lowe's. It runs great, but it does look like a pain to take apart 😂. I'll try to take care of this one lol. Thanks for all your hard work producing these great videos.

Have a handmedown Husqvarna. Its only a couple of yrs old but not cared for. Your video really helped me get it running. Thank you. Signed Grandmother in Portland Oregon 14:02 14:02

Very good presentation. Great job !

Just repaired one with the same issue. It was a loose carb boot.The carb intake boots get loose and they suck air and lean out. Always a good idea to tighten those two screws under the boot when you have it apart. If the carb wiggles at all the boot needs tightened.

First off, great video! Very detailed and well-documented. Second, I have a 125b and 125bvx. Both failed at almost exactly five years. 90~100psi on both. Carb cannot be rebuilt on new models (green fuel cap is old model, American parts, better quality) due to EPA mess. Most of it is sealed up good. Same reason those adjustment screws aren't phillips or flat, unlike on my motorcycles, tractors, etc. I was told to basically buy new carbs. Both blowers are not in the shop, likely bound for the trash. This DID force me to do the smart thing and pay more for a solid machine. I bought a Stihl BR800 X Magnum. My father-in-law is in construction and has Stihl products that he had before I met his daughter, fourteen years ago. All run flawlessly. I got a four-year warranty on mine at no charge. Oh, and it blows so much better than the old ones too! I might fix them and donate them, but I dunno', I don't want somebody mad at me!

Husky makes good equipment. I always said that if I didn't have a Stihl I'd have a Husky. Never fooled with a Husky blower or trimmer but bet they'd bee an asset to the stable. Good fix for you and I'd be happy to have one myself. Blessings

New subscriber. Man, you're so knowledgeable, and you make entertaining videos. Keep up the amazing work!

It's a great little blower when it runs right

I have one. I just replaced the purge bulb and fuel lines and filters. It does what I want it do. I like it more now that I know more about how it works,

I’m in the market for a new gas blower, it has come down to this model vs the Echo PB 2620, which I’m leaning towards, factors include, chrome cylinder, multiple nozzles, pro grade, light weight. Number of positive reviews. Thanks

thank you for this... much appreciated

Not a Husky fan or a fan of any brand that bury the carburetor under 3 different plastic covers.As always great content very informative 👍

Mine stopped running after a year. Tore it apart. Found metal bits in the cylinder. Changed the piston and ring. New plug, filter, fuel, still wouldn’t start. Threw it in the trash. Felt good to be finally rid of it. After a few hours I retrieved it and gave it one last chance. It started and I finished the yard work with it. It’s still not completely running right but it’s getting there.

I have just got one of these that had been sitting for a few years. They replaced the carb and the fuel needle. £150. Hopefully it will work for many years to come.

Nice fix

I have a question about a Craftsman leaf blower that is at least 35 years old. No parts are now available but it is missing one of the carb adjustment screws. Will the machine run missing one of the screws? What can I do since there are no parts available? I love you videos. You explain everything so good.

Awesome video, thanks heaps. I was about to throw out my ryobi blower. Could you tell me what to use to clean the outside of it the stuff you use works well

Your videos are helpful and inspiring. What brand of cleaner do you use? It appears to work very well. Thanks

Greetings from Denmark, i enjoy your videos very much. Keep up the good work:) I have a question of what soap you use in your duster bottle. It seems to be very efficient:)

great video as always friend

I like this blower. Need to get me one to match my 525L. All the gas stations in my area are all ethanol mixed fuels, so I just buy the Husqvarna brand fuel in the big can.

I love your videos you are right to the point. If you don’t mind me asking what chemical do you use to clean off the parts?

I would not get one, our church has one and I do not like it at all. It feels very cheap. I would definitely go echo or stihl over this one. Have you had or worked on a little 2 stroke water pump (like an echo wp1000?) I just got one, and wonder what you would do for storage for the pump besides draining the water out of the pump. Great video as always!

Great video thank you..Would you recommend replacing the 2 stroke mix with aspen while a machine is in storage during the winter or is it best to drain the fuel completely. Thanks in advance

While I ran into this issue and got it started with the full-throttle trick, it eventually did fail on me a month later requiring I order a new carburetor. If you're running into this problem consider taking the time to order a backup for $15 off Amazon lest you end up without it when you need it.

Great video👍🙏👍🙏

For me its stihl 100% Ive had the top of the range echo blower and it was powerful but i couldnt get used to the feel of it. Ive never been a fan of husky because they seem to over engineer there stuff which makes it difficult to work on. Great video 👍🏻

Nice work, as usual. I have the same blower and it is a 2016 model. Runs well. I do have a question. How do you release the spring loaded air inlet? It is hinged but there seems to be a latch I cannot find and release it. Thanks in advance for your help.

Got 2 of these. Use 1 in each hand in the fall. Live it the woods in PA. 150 psi...I can only dream. Most I've got is 125. other one at 115. Still run great! Differences in guages??

When you put him back together . You didn't use the primer bulb. After you rebuilt the carburetor if you were to use the primer bulb would it have flooded. Not questioning your work cuz you do a great job. But my blower does the exact same thing. It ran ruff . I adjusted the carb and it runs good . But if it don't start up it fowls out the plug. And as always a great job and thank you for sharing

So, for winter storage, do you recommend emptying the gas tank AND running the carb dry?

Very easy to work on the factory coils dont last long..

Are all the carburetors on this model adjustable? I see two black screws but it doesn't look like they are adjustable? Your opinion please. My model of my Husqvarna is a 125B

I have a Craftsman leaf blower that the primer bulb pushes in but doesn't fill and will only run on starter fluid, approx 20 years of age.

Ty

Hey what’s the secret formula that you soak the diaphragms in?? Thanks for the videos they are awsome!

Do you know how many turns it is for the factory settings for the carb adjustment on the high and low side? I can’t get mine right

Donyboy73 just did a similar video. Spark, fuel, compression, but wouldn't start. The issue was that the exhaust was plugged by insects 🐝 & needed to be cleaned.

I own Stihl equipment. I always go for high power, lite weight and ease of getting replacement parts. There is a Stihl dealer every 5 miles it seems. Very well done video, well spoken and two the point. I learned something. Thanks.

Awesome video, were did you get the daigrams from.

I have a 2009 Troy bilt horse riding mower it is making a kicking noise and I know that the engine is good

Where do you get your fuel line. Fuel line I bought self destructs after one season and I have to go fish for the clunk

On my mom's blower, the spark arrester was clogging every few months and they were always on back order. I got tired of cleaning the old one and couldn't get a new one at the time, so it got deleted. It was too much of a hassle.

What model pressure washer are you using or is that just a garden hose sprayer?

I’ve adjusted my L & H screws so much I don’t know how to get them back to factory setting. Any idea how much they open from the closed position?

I know that some people say that Husquvarna’s have a bad reputation, but all the ones I’ve had working in gardens. I’ve never had a problem with them? I’ve tended to have the problems with Stihl’s.

I prefer Stihl but I wouldn't turn my nose up at this one. If I knew I had a carb issue on it I'd probably do what you said and just replace the carb then try servicing the old one at a later date, that way it isn't an issue if I muddle it up.

What type of product do you use to rejuvenate the diaphragms?

I found out what was wrong with my leaf blower. The low screw was turned all the way up. Why or how I don't know but I could not get that damn thing started so I just started turning the screw down a quarter turn at a time. Eventually it sounded like it wanted to start so I kept turning until it started. Then I adjusted it properly so it will run but I also had to turn the high screw down also.

120 PSI is good for a new machine as well !

I just replace the carbs I know that's wrong but I find it a lot easier then rebuilding them an them not work some times

Should I get one of these for Christmas I need honest suggestions?

I have the same blower. It’s practically new and it seems like the carb is flooding out on startup.

Hi I am wondering from where do you buy metering diaphragms

I have on of these blowers and my air box is very loose. I took off the carburetor cleaned it. Now it runs but i dont see why it feels loose. Like its the whole airbox and carburetor. Do you know the reason? Its something loose that i cant see?

well for me it does differ but yeah the old Husqvarna aka Husky type,s are a good unit etc.

May be electronic interference, some radio frequency interfere with magneto!!😊

I just bought one of these for $20. It's a year old and wouldn't start for the guy this year. I'm here to figure it out.

What is the proper gas mixer for these blowers

"love dealing with headaches"......funny.

I notice that you spread some projects out across both of you channels. Is it random or do you direct certain aspects of a repair to a particular channel? For example do you direct repair videos to one channel and cleaning videos to the other? I'm just curious.

what liquid are you dipping rubber that into?

You did a great job

I would buy one, really, it's not bad at all to work on in my opinion and the Husqvarna engines last very well if ordinary maintenance is carried out .Thanks for this video 😊 Ian

What for hose dit you use

Something that would start one day and not the next? Yup... 1969 Harley sportster. Lol.

I have the same exact blower, it started out as an idling problem. If I let it idle for to long it wouldn't rev up and die, I bought a cheap Chinese carb off Amazon and fixed it right up

Hello i have a chainsaw that was running the day before but now wont start because it has no spark, do you know what could have happened?

I've got one. First time in 3 years I've had to adjust anything on it. I found it 1 and a half turns is enough to get you started. And it doesn't need to be running like a raped ape. Just get it idling easy and running good when the trigger is pulled. Conservative adjustments are your key.

Hey bro what's up? To me it dosen't matter what brand of equipment a person uses but as for me, I know that you know where I stand with a certain brand of equipment. If this is what a person is able to afford and it is able to get their work done then by all means get it and get work done.

I have this blower, i replaced the carb, spark plug, air filter, piston, crank seals, new gas and STILL cant get it to run...any ideas?? 😟

blue exhaust. why?

Beware of aftermarket air filters

These are cheap big box store homeowner blowers. Have seen 4 with scored piston, rings, and cylinder in last 2 years. You have already done a video on His what na 125B blower, and I said the same thing.

👍👍👍👍👍

Bad Carb Diaphragm and Carb Adjustment 😩😭👍🏼

My last blower was an echo, after learning how much husky and stihl parts are.

That blower is looking like it is a blower / leaf vacuum

From day one, I have nothing but problems with this blower.

No, the simple solution is to adjust it properly. Not tear it down, but a new carb, (needlessly) and replace it.

You just like cleaning carbs don't you come on admit it 🤣

Some smoke out of it ,wrong fuel mix ...🤔

I have no need for a blower here. Nice fix on that one though.

I have one ,total junk! Replaced ignition coil twice and the carb once. Never again!

Oh I'm early for once

I have this one and I can’t stand the design.

wow 6 minutes ago

I'd get an Echo. That Husq. is a real pain to work on. The Echo is a breeze, and it's a better machine, with no built-in problems!