NP300 LIFT KIT INSTALL DIY IFS SUSPENSION

No video

NP300 LIFT KIT INSTALL DIY IFS SUSPENSION

Рет қаралды 110,110

Күн бұрын

Rightio! Lets run through how to slap a lift kit into a NP300 in another shed sessions video. D23 Nissan Navara
This lift is a 3N2
❤️ If you find my content helpful drop me a thumbs up
🔔 Subscribe for more videos
📢 If you enjoyed this video help others And share it to a page -
• NP300 LIFT KIT INSTALL...
📢 Want to get comp shocks under your rig?
💥Supplier and manufacturer - Partsman Dan 0412 281 319
www.partsman.c...
💥Aura Motive Mechanical (07) 5438 0339
/ auramotivemechanical
💬!COMING SOON! how to install brake lines to your NP !COMING SOON!
My Top Videos For New owners
/ @jpcaptured799
💬 Join others in the comments section belowww it's totally VIP
✅ For any inquiries contact me at jpcaptured@outlook.com
✅ want to see more content!?
Facebook - @jpcapturedd
Instagram - @jp_captured
ModifiedNP300's Facebook page - / 528018704236497
Follow Connors gold NP - @hornetgold_np
Disclaimer: This is just some dude in his shed makin vids for the peeps. This is not a professional opinion, just mine.

Пікірлер: 171

@jimmyd6279 3 жыл бұрын

This is the best how to video i have ever seen!Excellent lighting and camera work.I'm a retired mechanic and found myself sucked into watching something i have done a million times before myself!Really well done.

@Jimmy_Saf 2 жыл бұрын

100% bro one of the best how to videos out there.

@tannga1790 4 жыл бұрын

This is what a video should be like and that’s why you’re the best to watch 👍👍

@Fernweh4x4andadventure 4 жыл бұрын

Hey bro, I thought this was a great video, thanks for the all the time, info and effort you put in to it ay. I’am not mechanically minded but want to be, and this gives me more confidence doing stuff by myself. Also realised I wasn’t subscribed, so sorted that pretty quick! Keep up the awesome build mate

@jpcaptured799 4 жыл бұрын

Mate that is so awesome to hear! Just make sure you set yourself aside enough time to not be rushed. Working on cars = doubling the estimated time you think it will take 😀 and also thanks for subscribing 🤙

@Sam-gh9zk 4 жыл бұрын

Hey bro the info you put into this video was Killa keep it up man your one of the better ones on here

@jpcaptured799 4 жыл бұрын

Glad you enjoyed it bro, and thanks!

@hamidrezageraminejad8171 2 жыл бұрын

thank you, very clear and professional. especially for upper control arm in front

@millpro2xxx 4 жыл бұрын

What a great explanation! I learned a lot from this channel!

@dariuscooper1293 4 жыл бұрын

Great video heaps of info on this for newbies , I reckon do a 4” exhuast haven’t seen one on a np yet 🤘🏻

@jpcaptured799 4 жыл бұрын

Cheers Dazza 👍

@ssusggus 3 жыл бұрын

What would be the purpose of a 4inch? Would it even be worth doing anything bigger than 3 considering the size of the engine

@ryzan92 3 жыл бұрын

Hey man good video, I always like to see someone's install to see what unexpected challenges they encounter. One thing I noticed from your video is that you mentioned tightening all the bolts once the suspension is on the ground which is correct, but you should also loosen off & re-tighten any suspension arm with a rubber bonded bush (ie. trailing arms & panhard) so they are also unloaded at the new height.

@georgesdesk 4 жыл бұрын

Awesome video content, very nicely done ✅ attention to detail appreciated, we enjoyed watching the installation of suspension components Thumbs up to the good looking dog at the beginning of the intro, maybe we can see more of and know his or her name soon, great work 10/10 👍

@jpcaptured799 4 жыл бұрын

Cheers George. Sounds like our workshop doggo needs an introduction 👍

@georgesdesk 4 жыл бұрын

JP Captured I would strongly agree

@thecap3189 3 жыл бұрын

Great step by step to follow. Just installed a 3n2 in my nav only thing I wasn't expecting was absolutely every nut and bolt being tighter than a nuns @#$$. Absolutely ridiculous. Ended up snapping a socket and having to cut a nut to get the stock uca out 😤😤

@jpcaptured799 3 жыл бұрын

They must have been insanely tight! F#*@n nissans 😂☠️

@Thematty635 2 жыл бұрын

Man mine right now are insanely tight too. Air powered impact is getting me no where right now!

@Potenone 4 жыл бұрын

Just ordered my comps today thanks for the video mate can’t wait to install them

@henryjabello2690 3 жыл бұрын

Awesome! I loved the way you illistrate everything. Kudos Jr.

@jennimareeh 4 жыл бұрын

So much detailed and easy to understand info.

@jpcaptured799 4 жыл бұрын

thanks, maybe time for the ram to get a suspension upgrade? 😀

@jennimareeh 4 жыл бұрын

JP Captured and another of other things too lol

@nathanoakley4530 4 жыл бұрын

I’ve always wanted to see it done! So with your exhaust like race cars do run it out through a body panel like just behind the rear wheel on the rear tub quarter would look trick as!

@nathanoakley4530 4 жыл бұрын

Message me on instagram @nathan_oakley33 and I’ll send you a pic if you don’t get what I mean

@braydonhall2264 4 жыл бұрын

Loving the videos mate! keep them coming, giving me a lot of inspiration to modify my STX. Cheers

@jpcaptured799 4 жыл бұрын

i have a long list of mods still to come 😀👍

@maxmossman3373 4 жыл бұрын

Great, detailed video. Saved me a heap of time with the steering linkage tip! Cheers mate.

@jpcaptured799 4 жыл бұрын

It was nerv racking at the start pulling it all apart but it was actually really easy. Glad it helped mate 👍😊

@DASHOffRoad 4 жыл бұрын

Those UCA's look heaps easier to adjust than some that Ive seen

@jpcaptured799 4 жыл бұрын

They are such a wicked product. It was my first time using them too.

@travisturton5294 4 жыл бұрын

Great video I really like the amount of information you gave us for our own projects. Diesel Tuning Brisbane I believe has a np300 high flow dpf in the works, not sure if it's for sale yet, but I saw a video of it back in April so it may be available now. Might be worth your while if you want to get woosh woosh noises. Also a legendex exhaust is what I'm hoping to buy would be great to see a in depth install and review of it. Lastly in regards to breathers (if you haven't already done them) Harrop do a pretty neat kit, their's has the added bonus of being able to breathe through your airbox instead of your engine bay so only cooler and cleaner air will get into the diffs, etc.

@jpcaptured799 4 жыл бұрын

Some solid information Trav, cheers brother. I'm definitely into the idea of the breathers finishing up in the airbox 👌

@sebtrident 2 жыл бұрын

Hey JP in regards to the exhaust just remove the big old hunk of junk DPF and or get a hollowed dpf so if you do get pulled over about the exhaust you shouldn’t get knocked off because it still looks like a dpf so the cops should let you go but it’s up to you bud Love the vids mate been watching your vids for a while now and I’m enjoying them keep it up

@jpcaptured799 2 жыл бұрын

Cheers Seb, I really need to do something with the exhaust.. it's on the hit list of upgrades that's for sure 😉

@mattheworton2742 4 жыл бұрын

hey man, sick vid. I've got the 3n2 comp shock lift too and it is the best thing I've bought for my car. next video should definitely be a dpf delete turbo exhaust because thats my next mod and I need you to show me how to haha

@jpcaptured799 4 жыл бұрын

I think i am going to do a custom made system Matt. But i reckon that will still show people how to install an off the shelf product onto their car and also remove the original 😀👍

@Wreckitlarph26 4 жыл бұрын

Very informative for a DIY installation! Keep it up!

@jpcaptured799 4 жыл бұрын

thanks mate, will do!

@kmac7504 4 жыл бұрын

Couldn't be any better timing, I've just been contemplating what suspension to put in my nav. Had been thinking comp shocks and now this video has made up my mind. Nice video mate. On parts man dans website it doesn't show a remote reservoir option, do you just have to ask for them, cheers.

@jpcaptured799 4 жыл бұрын

stoked i could help Spoggy! i'm wrapped with my kit. i'm surprised they are not on the website man, yeh i would say best to give Dan a buzz and pick his brain about the remote resi options.

@JorgeGonzalez-ei6ft 3 жыл бұрын

You made that look so easy. Thank you

@Jimmy_Saf 2 жыл бұрын

This is a great video mate good stuff! 👍🏽

@ronz6214 4 жыл бұрын

Yewww great informative DIY bro! 👌🏾

@jpcaptured799 4 жыл бұрын

cheers Mate 😀

@benfarrell-q5m Ай бұрын

Hey mate, did you have an issues with the strut space with the factory strut, did over extend or anything? Great videos mate!

@jeremyhamitlon7551 4 жыл бұрын

Awesome 240Z mate! doing any videos on that?

@jpcaptured799 4 жыл бұрын

100% stay tuned 😉👌

@andyellis7051 3 жыл бұрын

Great video, so easy to follow

@jpcaptured799 3 жыл бұрын

thanks mate! glad you think so.

@liteshg8582 4 жыл бұрын

I think i'm convinced...nice vid.

@ethanbatt5583 4 жыл бұрын

Pretty keen to have a watch this arvy!!!!

@jpcaptured799 4 жыл бұрын

yewww!

@QueenMinerva 3 жыл бұрын

Great finger technique 😂

@jpcaptured799 3 жыл бұрын

haha

@KamalKishor-jp3dh 4 жыл бұрын

awsome video. I am planning get a navara now.

@jpcaptured799 4 жыл бұрын

Do itttt

@tyukikiquinchi7367 4 жыл бұрын

the lubricating the bushings got me hahahaha

@jpcaptured799 4 жыл бұрын

Hahahaha 🤣 ✌️

@woondoon4x4adventures36 4 жыл бұрын

I reckon a custom exhaust the dumps just in front of the rear tire.👌🏼👌🏼🤙🏼🤙🏼

@waderattray9210 4 жыл бұрын

Joshua Downs I second that

@twowheelfanaticfanatic 4 жыл бұрын

yeh i wanna do that to my nav so if you do it it would be helpfull jp. love the vid mate

@jpcaptured799 4 жыл бұрын

Boys, I'm liking this idea 🤙to keep the dpf or delete it 🤔

@waderattray9210 4 жыл бұрын

JP Captured risk vs reward with the DPF deleted it’s a big risk if you get caught and I don’t think the reward is worth it. But a side exit with a deep note would be sick

@jpcaptured799 4 жыл бұрын

Wade Rattray i'm so torn! i just want to build cool shit but the fuzz won't let me 😭

@raymondcasey5747 4 жыл бұрын

Am new to the 4x4 scene. You have very interesting videos. One question that I would love to have explained (and maybe some others who don’t know as well), what is a diff drop kit??. Cheers.

@jpcaptured799 4 жыл бұрын

new video coming out soon explaining this one Ray ✌️

@croydonq135 4 жыл бұрын

Great video. Alot of usefull information. Thanks

@davidbsmith8944 2 жыл бұрын

3” Mandrel Bend Exhaust!.

@stevejacky1434 3 жыл бұрын

Did you need to cut inner guards etc to fit those tyres? Great info btw, thanks a lot.

@joshualee2121 4 жыл бұрын

M8 you need to do a custom pipe with side exit through the tub haha.

@jpcaptured799 4 жыл бұрын

i am liking the side exit idea 🙌😜

@joshualee2121 4 жыл бұрын

Be a little different from the norm...

@samuelrabara635 3 жыл бұрын

Very well explained... Good Job

@papaed4741 4 жыл бұрын

t'was a great upgrade and very informative to details for self DIYer like me. Just an honest query though, how come you did not change the Panhard bar at the rear-end? does it have no bearing on the wheel alignment? thanks and more video pls.

@jpcaptured799 4 жыл бұрын

I was going to address the panhard bar in the video but ran out of time. I will run through this in another video soon, however when i did the 2" lift the diffs tracking did not seem to be compromised to a point that i felt it had to be done. I have always used an adjustable panhard when lifted a vehicle but normally i lift patrols and i have gone 3" plus lift kits.

@papaed4741 4 жыл бұрын

@@jpcaptured799 big thanks for the prompt response. looking forward to more of your updates...

@armu821 4 жыл бұрын

greetings from Honduras what price the suspension kit for Nissan frontier np300 2017 looks excellent

@MannixJr.1969 4 жыл бұрын

Maybe you could consider a zero or neg ative offset wheels, that will move your tites a little bit outer from the fender, lifted vehicles should go for a wider stance, anyway great job mate!

@jpcaptured799 4 жыл бұрын

i really want to but i live in a state where tyre poke is frowned upon. So in order to do a wider offset i would need to run flares and i can't find one i like.. And the factory pumped guards look so good 😭

@MetalFreak169 4 жыл бұрын

Nicely done mate, was a pleasure to watch, just a quick question, what size tyres are you running?

@jpcaptured799 4 жыл бұрын

stoked to hear it mate, i am running 295/75r17 maxxis razrs

@MetalFreak169 4 жыл бұрын

JP Captured nice I’m in the process of getting the maxis razrs for my hilux got a 2inch lift thinking of going for the 295s aswell.

@tjjones7361 4 жыл бұрын

Can you do an install of the new kings aluminium roof racks? 🙂 Have to fix the rails onto the roof of the models without roof rails.

@jpcaptured799 4 жыл бұрын

i was actually thinking about running the new rhino rack backbone system :-)

@realmnau Жыл бұрын

Thanks for the video man, I'm about to put a lift kit in mine and this helps alot. Question though, is it okay to install the aftermarket upper control arms if you're only lifting with a 2inch kit?

@ernestokoo252 3 жыл бұрын

Awesome video and rig, congrats! Will give it a shot on my truck soon...As to the break line plate that needed bending and the wheel speed sensor cable, was that necessary because of the brand you chose or the height you were looking for? Or does it needs to get done regardless of the lift kit?

@frederickcarlos12 3 жыл бұрын

Can you give all the specs and kits you got please for the whole project

@partygamer99 4 жыл бұрын

your cvs will be fine if u put a front locker in though id consider a diff drop

@jpcaptured799 4 жыл бұрын

Yes i am considering one still, i am currently undecided.

@lawsonharbutt802 4 жыл бұрын

Hey mate. How did it go before with just the strut spacers ? Any issues?

@lawsonharbutt802 4 жыл бұрын

And did that fit the 295s?

@jpcaptured799 4 жыл бұрын

no issues at all, and yes they fit with the 295's 😁✌️

@richardgibbs00 2 жыл бұрын

Also is it ok if i just add a extended upper ball joint to the oem controle arm..im only doing 3 inch at the front.

@RogerCampillo 4 жыл бұрын

Hi! Are you sure that you will have no issues with the CV joints? I mean with no diff drop. There are users who have broken the cvs with 3” lift without diff drop

@jpcaptured799 4 жыл бұрын

Hey man, it definitely can't hurt to put a diff drop kit in and if you have the extra cash you may aswell do it. But as i mentioned in the video. I don't think the CV angles look to bad. So i am going to wait and see how the angles look when i go offroad.

@gregrankin1863 4 жыл бұрын

I like the look of the spc front upper control arms, but I want keep my np300 completely legal and are unsure about grinding the strut bucket. Do you need an engineer to approve that?

@happymanasfksubaru2846 4 жыл бұрын

I love your videos good information Im looking to mod my x250d so I'm getting ideas. But do you know if the bull bar is same as the x class because they use same chassis

@jpcaptured799 4 жыл бұрын

Hi Mate, i have got the info on this and unfortunately it will not fit sorry to say 😓

@happymanasfksubaru2846 4 жыл бұрын

@@jpcaptured799 thanks so much 😊 for your time ⌚. I have been looking for one. Hopefully someone makes it

@davidbsmith8944 Жыл бұрын

What the lift kit heights, are Legal in SA.

@kpraz 4 жыл бұрын

Ohhh mad respects to that Z

@erhanuzdilli9788 4 жыл бұрын

How about a brake upgrade like 6 spot up front and rear disc conversion ?????

@jpcaptured799 4 жыл бұрын

It's funny you say that, i just noticed that pedders do a rear disc conversion kit yesterday! Not sure about the front callipers though, i will look into how i could do that one yasemen 🤙

@Irvi 4 жыл бұрын

Will you look to change radius arms eventually? Rate the remote res mount too!

@jpcaptured799 4 жыл бұрын

i will change the lower and upper control arms soon for sure Harry 👌

@haroldgc1140 3 жыл бұрын

Hey bro, i love your videos...question though, I have 2016 Np300 RX manual GB I'm looking into doing a heavy duty clutch set-up. Do you have any recommendations and 2ndly do you I'll looking to arrange a diesel remap tune, I'm in Sydney btw any advise?

@jeremiahsimbiken9827 3 жыл бұрын

Hey mate if you are just putting in the lift without changing the UCA, is the steering arm bolt connected to the UCA the only bolt you need to remove ?

@davidjackson3818 3 жыл бұрын

Excellent

@raynorbarnes4713 Ай бұрын

Did u end up putting in a diff drop mate?

@ranellamoste9004 4 жыл бұрын

How much the cost for the lift kit only, this is fit for nissan navara vl 2019? Nice vedio i watch it till the end.

@superhardcoretrooper 3 жыл бұрын

My upper control arms won’t come out with the one bolt on the bottom with the pin. They’re upgraded ones put on by previous owner not sure what to do

@daevenearonemanalese964 Жыл бұрын

What happens if u dont replace/extend the stabilizer links?

@benno8588 4 жыл бұрын

Put the ls on the engine stand in the nav.

@jpcaptured799 4 жыл бұрын

If the engine ever let's go it will be in there 😉

@seankiely175 3 жыл бұрын

Great vid bro, one question. I got the same strut spacers but the factory upper arm con assembly rubs hard on the bracket that holds the strut in, did you have to slap in an after market control arm?

@jpcaptured799 3 жыл бұрын

Not at all, i did not experience this issue.

@freddyvella474 3 ай бұрын

Is this the 3k or 2k one? Because I’m trying to find a 2-3inch lift

@bbggakkba 4 жыл бұрын

Did you have to cut the cross member for the fuel tank to clear the drive shaft at full droop? I've been told I need to cut mine if I want to do a larger lift kit

@bougnut 4 жыл бұрын

Hey man I hope you see this, where did you get your rear sway bar extension brackets from? And what did you do with the front sway bar links? Thanks in advance man

@jpcaptured799 4 жыл бұрын

Hey mate 👋 the front sway bar linkage s are standard and the rears were supplied by comp shocks, although they do sell heim joint linkages as well.

@bougnut 4 жыл бұрын

JP Captured ahh ok makes sense you wouldn’t really need to extended the front ones ay? Thanks again for the info man and killer videos too I enjoy watching them ☺️

@jaydenchoveaux1744 4 жыл бұрын

First 👌

@jpcaptured799 4 жыл бұрын

yewww 👍

@richardgibbs00 4 жыл бұрын

what size tire can i use with no lift. can i use 32inch? also will there be any change on the power of the motor. i have the nissan frontier np300 2019 looking to lift only 2 inches near future

@jimk8592 3 жыл бұрын

I had a similar 3" lift kit with coilovers on my D40 and my cv boots would get torn frequently. :( What tire size are you running?

@jpcaptured799 3 жыл бұрын

that's because D40's are the navara model even Nissan want to forget ;-)

@orlandotompkin-drew3623 4 жыл бұрын

looked on the website cant find the remote reservoir for the np300

@jpcaptured799 4 жыл бұрын

I think it's being uploaded soon, i would reccomend calling Dan for a chat.

@orlandotompkin-drew3623 4 жыл бұрын

JP Captured oh ok thanks

@sonny4754 3 жыл бұрын

Do you recommend adjustable upper control arms on a 2 inch lift?

@jpcaptured799 2 жыл бұрын

yes i do

@richardgibbs00 2 жыл бұрын

Did you upgrade the front stabilizer link?

@jpcaptured799 2 жыл бұрын

i didn't upgrade the stabilizer link.

@oscarduarte4979 4 жыл бұрын

What is the maximum size of tires with 18 rim without changing suspension or kit to lift it?

@enduro-parts-aus 2 жыл бұрын

Did those spacers stuff up your camber ?

@jomarmondares6923 Жыл бұрын

Did you perform body lift?

@pdimou15 Жыл бұрын

Can I get your hand with my Np300 I'm in Victoria building a off road rig

@spitzieyunque 4 жыл бұрын

Nice rig. What wheel and tire size are you running?

@jpcaptured799 4 жыл бұрын

Wheels are 17x9 +30 offset and the tyres are 295/70r17 👍

@spitzieyunque 4 жыл бұрын

@@jpcaptured799 thanks for the reply. Great videos and awesome rig. Have fun and stay safe.

@emilgenega634 3 жыл бұрын

Sir what is the length of suspension needed for 2 inch lift of np300

@logankingsley1300 8 күн бұрын

20:40 is this legal to trim the strut tower??

@jpcaptured799 7 күн бұрын

The vehicle has been structurally modified and could be viewed as requiring certification.

@aarons5324 3 жыл бұрын

What size is the split pin but, my split pin nut had been destroyed

@Potenone 4 жыл бұрын

Hey mate those remote res shocks where they for a np300 or from another vehicle that suit a np? Can’t seem to find them on dans website

@jpcaptured799 4 жыл бұрын

You may need to call Dan to get them mate. I think he is in the process of getting them on his website. Just say you want the same ones as mine 🤙

@Potenone 4 жыл бұрын

JP Captured to easy mate

@Potenone 4 жыл бұрын

JP Captured thanks mate I’ve sent you a DM on Facebook

@MrSergiosa 4 жыл бұрын

Which is The ring and tire number used? Is the originals?

@MrSergiosa 3 жыл бұрын

Which is the page or place were I can buy this adaption for my np300? And which brand is it?

@jpcaptured799 3 жыл бұрын

You can get in touch with Daniel at comp shocks for help with parts

@masonryan5139 4 жыл бұрын

Whats the details on that Z!!! is that yours mate?

@jpcaptured799 4 жыл бұрын

No it's not mate, but i am planning on releasing some info with the owner in a video soon!

@masonryan5139 4 жыл бұрын

@@jpcaptured799 yea nice! my Old mans dream car. if love to buy one for him one day. I use my nav to tow my 77 Ra23 celica around has a 1jz. Nice videos mate keep it up.

@wintle7408 4 жыл бұрын

Definately a custom exhaust

@jpcaptured799 4 жыл бұрын

i'm almost tempted to try and do a 4" from the dpf back

@stevenmusolino3279 2 жыл бұрын

Hey what size and offset of rims do you run

@kylefulton688 3 жыл бұрын

Do you have to remove the upper control arm completely if you just wanna remove the strut

@jpcaptured799 3 жыл бұрын

in most cases yes.

@darrenmatemberere1239 3 жыл бұрын

What size wheels do you have on?

@metroplayz1295 4 жыл бұрын

What size tryes you running man?

@jpcaptured799 4 жыл бұрын

295/70 R17 Maxxis Razrs on a 9" +30 offset Allied wheel

@rorymcarthur925 4 жыл бұрын

Did you end up dropping the diff?

@jpcaptured799 4 жыл бұрын

Not yet no 😊

@LVNITUPM8 4 жыл бұрын

Why is it you look like and sound like LukeErwin23 on youtube haha

@krump7429 4 жыл бұрын

Why no front Diff drop?

@jpcaptured799 4 жыл бұрын

I address this in the outro of the video Krump. I am going to see how things go when she hits the tracks and decide from there if i will install a diff drop.