Bumotec Single-Setup 7-Axis Gun Slide Machining

Рет қаралды 70,373

3 жыл бұрын

The machines of the s191H series are suitable for turning, milling and grinding of individual parts or from bar (diameters: 32, 50 and 65 mm) in a single setting. The series has an extremely versatile modular structure, which means that it is possible to build any kind of machines from standardised modules for various machining tasks - including a machining center with seven axes and three spindles.
Visit Us On The Web: northsouthmachinery.com/
Socialize For More Cool Content:
Instagram: / northsouthm. .
Facebook: / northsouthma. .
LinkedIn: / nort. .
Twitter: / nsmachinery

Пікірлер: 67

@Julian-1111 2 жыл бұрын

It is Free Machining Brass. It is totally the Easiest Metal to machine and looks pretty too. Used to demo a program where viewing the cutterpath, measuring features (quickly) and proofing the Tooling, is more important than editing speeds / feeds. The Steel equivalent is called “Ledloy”.

@13anomalous16 2 жыл бұрын

Finally someone who knows what they're talking about!!

@Juxtaposed1Nmotion 2 жыл бұрын

the filming of the actual machining was nauseating

@SupremeRuleroftheWorld 2 жыл бұрын

not as bad as the stupid and overly loud music. if they just made a video of actual machining and machine noise they could make a video that is actuall watchable and makes someone interested in watching more or knowing more about their machines they are actually trying to sell.

@lvxleather 2 жыл бұрын

Pretty cool machine.

@prodigy750 2 жыл бұрын

That machine is absolutely incredible!!

@KokayMate 2 жыл бұрын

Impressive!

@seven1384 2 жыл бұрын

That's awesome

@javiercruz66ify 2 жыл бұрын

Uffff shadow systems gotta get them sun of these

@rbarmsusa 3 ай бұрын

Wow very impressive.

@JoggingWithForks 2 жыл бұрын

The video is broken, someone removed the machining sound and replaced it with some sort of headache inducing overly dramatic noise and the filming was done by a someone with end stage Parkinsons? Bad choices.

@joelperez. Жыл бұрын

WOW! 🤯

@FDCNC Жыл бұрын

whats the cycle time in steel, thats what I want to know?

@peeweejj 2 жыл бұрын

Music is like 20x more aggressive than what's actually happening in the video. It's a little ridiculous lol. The editor was way too overzealous here.

@brighambaker3381 5 ай бұрын

For a company who calls their machine bum-o-tec, they do pretty well😂

@olibarahosasa1137 2 жыл бұрын

This makes the Terminator look like a sack of potatoes

@livingroomlaptop Жыл бұрын

that is some good shit

@dirtkickersandarrowheadlic9317 2 жыл бұрын

this is dope. lot of haters on here sheesh

@olibarahosasa1137 2 жыл бұрын

They say this is the machine that made The Terminator

@larss337 2 жыл бұрын

It's called BUM-otec?

@danhyde7501 2 жыл бұрын

I thought the same, great name choice lol

@janirajaquessjaques1680 2 жыл бұрын

SerTFik Tiago Jaques Da Silva 🇧🇷✔️

@antoniogarcilazo6305 2 жыл бұрын

These are the type of set ups that got us to the moon

@MicroageHD 2 жыл бұрын

No, that was mostly done by hand. Old school.

@vitfic8870 2 жыл бұрын

How did you do that little slot at 1:52 ?

@ShInYaKu88 2 жыл бұрын

watch 1:13

@FreeMan22401 4 ай бұрын

Hello Sir i want to learn it please can someone help me

@prashantkaushik6900 4 ай бұрын

What is the name of machine

@adenisongomes9903 Жыл бұрын

Excelente vídeo gostei muito meus parabéns

@adenisongomes9903 Жыл бұрын

Excelente profissionais

@mackk123 2 жыл бұрын

can you guys make a machine that has multiple spindles in parallel? I wanna make 15 of them at the same time.

@ipadize Жыл бұрын

why only 15, do 100 at the same time /s

@mackk123 Жыл бұрын

@@ipadize 100 seems like a small number thinking about it.

@hulkaplasta6558 2 жыл бұрын

que instalación tan mas chingona

@therealsourc3 2 жыл бұрын

This material kinda looks like OM7, brass/bronze.. Is it just coated or what is it?

@michaelmiller5566 2 жыл бұрын

Nickel plated

@dmtjuulpod 2 жыл бұрын

When they made this video they likely didn't want to have coolant spraying all over the place cause you wouldn't be able to see any of the actual metal cutting. So, they just use a softer more easy machining material like brass and turn off the coolant. The actual part is not brass, probably stainless.

@authentic4225 2 жыл бұрын

How many hours did that take?

@dmtjuulpod 2 жыл бұрын

In that type of machine I'd estimate likely just under 1 hour cycle time is quite plausible, if not less.

@nilsdietrich5563 2 жыл бұрын

Nice. Interesting work holding solution. I am more of a 840d guy but I guess fanuc is still selling.

@PKmode 2 жыл бұрын

Still selling? Fanuc dominates the market in the states and Asia. It's not even close.

@brandons9138 2 жыл бұрын

@@PKmode Old habits die hard. Fanuc is VERY dated compared to other controls that are available. I used to think that FANUC was the king shit in CNC controls. I was wrong they are just shit. I've used them on 3-5 axis mills, 2-9 axis lathes and Swiss machines. I've been using Citizen Cincom controls on the same machine types. The Cincom control is FAR easier to use. FANUC needs to step up as they are falling behind the curve in many ways.

@max_eley 2 жыл бұрын

@@brandons9138 The easy way to look at it is, which control will be running after 30 years?, the answer is the fanuc, my OT model A from 1986 is still working with no problems.

@brandons9138 2 жыл бұрын

@@max_eley So? At my last shop we had an Index Traub machine with a paper tape reader on it? It was late 1970's vintage. It was still a shit control. FANUC is so falling behind the curve in so many ways. I've setup and run 9 axis lathes one on a FANUC control, it was a 30 series control on a Doosan MX machine . The other was a 9 axis Miyano with a Cincom control. The Miyano was infinitely easier to set up. After being exposed to controllers that are not FANUC I would have a hard time going back. They just make simple things harder than they need to.

@Ct-ly9dw 2 жыл бұрын

840d !! .... I never want to go back.

@IBUILTTHAT 2 жыл бұрын

Looks great, but you can definitely reduce cycle time with a few modifications to the cutting process. I do like how well the material is supported.

@shawntootill24 2 жыл бұрын

@heldgop don't bother.. Everyone knows more. Those who're doing the work are always incorrect or wrong. always judging off a 3 minute video.

@andrew6274 Жыл бұрын

msrp 850000

@snowgorilla9789 Жыл бұрын

As amazing as this is would be better without muzac

@balthazarnaylor5874 2 жыл бұрын

bruh its brass

@samwize7383 2 жыл бұрын

You could easily make that on a five axis

@twooldfartsinanrv7137 2 жыл бұрын

On a 5 axis you would need a second set-up and fixtures made. Yes it could be done, but it was and still can be done on a three axis.

@kw2519 2 жыл бұрын

@heldgop right? 😂 ya, you could do it on manual equipment, it would just take a fucking year to do. Hell, it’d probably take a year just to plan it all out on just manual equipment.

@sheepman6291 Жыл бұрын

This is a lights out machine. No employee needed. There is a big difference. This machine is also made for precision grinding.

@-Cutz- 9 ай бұрын

Man this machine looks insane i see they make 100 to 200 dollar cnc machines on amazon theres no way itll have the power to make these right?

@krisraps 2 жыл бұрын

In Europe This Would Be SUPER DUPER ILLEGAL !!!

@user-cg9nr5rq9u 5 ай бұрын

Дорого же?

@ankithmistry 2 жыл бұрын

Ok tell me how many failed pieces before this one :)

@WCGwkf 2 жыл бұрын

These machines are a million dollars for a reason. They don't mess up a bunch before they get it right

@WCGwkf 2 жыл бұрын

@@TStheDeplorableit's the same thing. Unless you have someone that doesn't know what they're doing a machine like this will do what it's told

@WCGwkf 2 жыл бұрын

@@TStheDeplorable it sounds like you're the guy that doesn't know what he's doing. A good machine with a good post processor and a skilled person behind it doesn't produce a bunch of scrap before its done right.