NX Instructional Series - How to use SwiftBoard and RapidBoard Keyboards

Рет қаралды 9,677

3 жыл бұрын

In this tutorial video, Tom shows off a new feature with the latest Airware version for the NX series of transmitters! Now with version 3.05.03 or higher, users have 2 new text input option AND a new option to navigate the Function and System Menu lists. Follow along to learn more.
This video series is dedicated to the NeXt generation of Spektrum Transmitters and what you learn in these videos will apply to all NX transmitters, like the NX6, NX8 and NX10.
Need help updating your NX? Check out these videos
Update over WiFi - • NX Instructional Serie...
Update via USB Cable - • NX Instructional Serie...
Check out all our NX related videos in our Playlist - • NX Instructional Series
Want to get your hands on the NeXt gen of Spektrum technology? Check out your favorite Spektrum retailer or visit our website to learn more!
NX6 - www.horizonhobby.com/product/...
NX8 - www.horizonhobby.com/product/...
NX10 - www.horizonhobby.com/product/...
Thanks for watching!
Make sure to follow us on Facebook and Instagram for all Spektrum News and Promotions!
/ spektrumrc
/ spektrum_rc
@SpektrumRC

Пікірлер: 42

@TheRCAirMarshall 3 жыл бұрын

Some great new features! Thanks to the Spektrum Dev team 👍👍

@ianmallett78UK 3 жыл бұрын

These are a much easier option to use and saves a lot on set up and naming things, keep them coming Tom.

@ConservativeUSA67 3 жыл бұрын

Great job Tom! The new keyboard is just excelent. Loving the NX series 😜

@porkchop41 2 жыл бұрын

Thank you, Thank you, Thank you!!! Legacy is the slowest, and most arcane system I've ever used!! I cussed Spektrum everytime I used it!!

@BDTennessee 3 жыл бұрын

Cool feature and good video Tom!

@epoweredrc 3 жыл бұрын

Pretty Awesome Tom thanks for the video, now just make a update where I am able to make any of my switches say anything i want them to.. Text to speech is so missed from my IX12 I used to have.

@andygatenby9762 3 жыл бұрын

Very cool, Thank you!

@donnavanstewart2833 3 жыл бұрын

cool Demo Tom!

@ruimessias1302 3 жыл бұрын

Awesome and hopefully more features in the future. Are you guys planning to produce NX series with 12 or 14 channels in future?

@manuelbeltranmeza Жыл бұрын

Muy bueno este video, muchas gracias, Greetings from Mexico.

@GM-pm4hm 2 жыл бұрын

I like the updates, thanks. Any chance you will make a keyboard selection for QWERTY?

@jaymartin3945 3 ай бұрын

Thanks good demo. It is a bit distracting when you are using a metal screwdriver for your pointer because it makes me feel like you are going to scratch your screen.

@old-rcplane-phart 3 жыл бұрын

Time to UPdate! 👍

@old-rcplane-phart 3 жыл бұрын

I like the update! 👍👋👋👋

@bansheerider619 3 жыл бұрын

Would be nice to know there is an update in the first place.

@darrinanderson953 Жыл бұрын

What wing type do I use on the nx 10 for large scale plane that uses 4 servos on ailerons

@George-wj2xl Жыл бұрын

Bought my NX10 a year ago and really like the functionality of it. I have been using the AR10360T in my EDF jets that had the AR8360T. Here is a question for the engineers. How is it the the AR637T has 7 usable channels and the AR8360T has 10 usable but the AR10360T only has the 10? It makes sense to me it should have 12 usable. Thanks

@SpektrumRCvideos Жыл бұрын

I think it is more that your NX10 is only 10 channels. If you had a higher channel count TX you are able to use any available channel for modes/gains etc

@domscorpi9775 2 жыл бұрын

what is the difference between the Spektrum NX series and the DX series ????

@joeeagle9531 2 жыл бұрын

@ spektrum team 👏.....the update corrupted the bnf plane list, so I had to downgrade to an earlier firmware.......pls fix this bug !🤷‍♂️😉

@mgbnet 3 жыл бұрын

To the right of the selected keyboard type, it says "Spiral". What does that mean? Not updated my radio yet, so not had chance to play with the new keyboards, but they look like a very welcome change!

@SpektrumRCvideos 3 жыл бұрын

At this time it is not a field that can be changed but may be a way to further customise the interface in the future. Essentially a place holder at this time :)

@billpennymcnally226 2 жыл бұрын

Great Video Tom how do get my nx8 to announce high and low rates on voice Cheers Bill

@SpektrumRCvideos 2 жыл бұрын

Hi Bill! Thanks! It is setup in the Audio Events menu. Go there and select Switch Change Reports. Select the switch you would like to announce, then choose from the extensive list of available audio callouts to match your switch positions. Hope that helps!

@billpennymcnally226 2 жыл бұрын

@@SpektrumRCvideos Tom, Thank you ever so mch being new to spectrum your videos help tremendously cheers. Bill from Tasmania

@larrypaine1523 3 жыл бұрын

Where is the enter key? I assume it might be the best scroll. When I click, it adds another character.

@old-rcplane-phart 3 жыл бұрын

Is it possible to import model templates onto the dx9? (Asking for a friend! 😁)

@SpektrumRCvideos 3 жыл бұрын

in a way yes, just make a model that you copy from when you want to create a new model from that template :)

@pauld5631 3 жыл бұрын

When scrolling down to update, my NX-8 skips Update & Logout. It will mot back out. Only option is to power off. I have 3.04

@SpektrumRCvideos 3 жыл бұрын

Try updating via SD or USB

@pauld5631 3 жыл бұрын

@@SpektrumRCvideos No PC. That is why I went from DX to NX. Hummm. I might try using my ipad

@malelonewolf80 3 жыл бұрын

Tried that update, ut it corrupted the bnf plane list, so I had to downgrade to an earlier firmware.

@joeeagle9531 2 жыл бұрын

i have the same issue,......@spektrum team this is a bug ....

@rcaddictjcl 3 жыл бұрын

Why doesn't Spektrum notify registered users that an update is available? I've had items registered for years and have never received a notice.

@SpektrumRCvideos 3 жыл бұрын

We are working on doing this again in the near future, there was/are some logistical issues getting in the way :/

@rcaddictjcl 3 жыл бұрын

@@SpektrumRCvideos I've been a loyal Spaktrum user for a while now. It sure would be nice to get an email notification instead of stumbling on updates while surfing the net.

@ukmitch86 2 жыл бұрын

@@rcaddictjcl Christ fella, they don't owe you anything after you've bought it other than warranty support if something isn't working. Set your own reminder, use a free calendar on your phone. Blaming others, FFS.

@rcaddictjcl 2 жыл бұрын

@@ukmitch86 Set a reminder on my phone? For what? That makes no sense. Yes they do owe me something after being a loyal customer for years.