Рет қаралды 13,295
Cycler set up
1.Open door
2.Turn on
3.Inspect cartridge,take out paper tapes
4.Insert cartridge
5.Close door
6.Spike Normal Saline
7.Attach pressure pod
8.Press add fluid
Warmer set up
1.Turn on
2.Put 1 bag on warming plate
3.Strap the bag
3.Press the up arrow up to 5 bars
4.Hang remaining bags to the IV pole
5.Connect multi-line adaptor to each hanging bag
6.Spike the bag to the warmer
7.Break the cones to all hanging bags
8.Connect short segment line to bag in the warmer
9.Break cone to the bag in the warmer
10.Prime short segment line and close the green clamp