O11 Mini Snow - Mod Build Video - Painting, Frosted Tubing, Fan decals
Рет қаралды 49,125
Күн бұрын20% Coupon code: GGF20
▬ Windows10($15.9):bit.ly/3a1IXr3
▬ Windows10 pro(2PCs) ($23):bit.ly/2YEjyPx
▬ Office 2019($50): bit.ly/3gMLaJe
#CDKdeals
(Prices listed reflect the cost after coupon code is applied)
Sit back grab a coffee as we cover EVERYTHING you need to know about creating a custom build like our recent one in the O11 Mini Snow Edition. Not only do I go over what was performed but also cover in detail, things like painting blocks and fittings, how to do your own frosted tubing, motherboard trays, fan deals plus much more.
Time-lapse build video - • Simply Bliss! DIVINE O...
00:00 - Intro
01:35 - AD - CDKDeals
02:10 - The O11 Mini Snow Edition, what is it?
04:25 - Topics covered in this video
07:08 - Painting
11:54 - Front Distro Plate mod
13:43 - Frosted tubing
14:49 - Frosted tubing showcase
19:05 - Custom motherboard tray
21:25 - Creating fan decals
24:35 - Distro installation before rad and fans
25:12 - Reasoning for fan orientation
26:05 - Fan choice, Lian Li, EK or Noiseblocker
28:42 - System specs and temps
33:20 - Wrap up
►Links
Paints-
www.bunnings.com.au/white-kni...
www.bunnings.com.au/white-kni...
www.supercheapauto.com.au/p/s...
Distro O-Rings-
swiftsupplies.com.au/silicone...
www.ebay.com.au/itm/313138041...
Screws-
Distro - M4x16mm counterunk head - www.ebay.com.au/itm/392779549...
GPU Block - M4x8mm button head - www.ebay.com.au/itm/392779549...
Rad Fans - 6-32 UNC1-1/4" - www.ebay.com.au/itm/264222099...
Rad - 6-32 UNC 1/4" - www.ebay.com.au/itm/264222099...
Sanding Pads-
www.bunnings.com.au/uni-pro-m...
www.bunnings.com.au/sandblast...
Vinyl Cutter - amzn.to/3wk40iy
►PC Specs - Amazon US Store - amzn.to/2JzK5YN
ASRock Z590 Phantom Gaming-ITX - (Painted white) -
Intel i7 11700K - amzn.to/2QiuiSY
Team T-Force XTREEM ARGB 32GB 3600Mhz White -
Team Cardea Ceramic C440 Gen4 NVMe 1TB - amzn.to/2Qiv0j6
Team Group T-Force DELTA MAX White 1TB SSD -
Lian Li O11 Mini Snow -
Lian-Li ST120 ARGB PWM White
Silverstone SFX SX700 - amzn.to/2QeapfN
CableMod Pro Sleeved Cables - amzn.to/2VoY9t7
►Watercooling
EKWB EK-Quantum Magnitude CPU Water Block 115x (painted white) - amzn.to/2RIeRnj
EKWB EK-Quantum Vector TUF RTX 3080/3090 GPU Water Block, D-RGB, Nickel/Acetal (painted white) - amzn.to/3f94iBM
EKWB EK-CoolStream SE 360 Radiator (painted white) - amzn.to/3ffmI3H
EKWB Quantum Reflection PC-O11D Mini (painted white, o-rings and screws replaced) -
EK-Quantum Torque Rotary 90° - Satin Titanium 2 Pack (painted white) - amzn.to/2RM6qrh
EKWB EK-Quantum Torque Plug Fitting w/Badge, Satin Titanium (painted white) - amzn.to/3w0a3bN
EKWB EK-Quantum Torque Drain Valve, Satin Titanium (painted white) - amzn.to/3f82r04
EKWB EK-Quantum Torque HDC-14 Rigid Tubing, 14mm OD, Satin Titanium - (painted white) amzn.to/2SN0izq
EKWB EK-Quantum Torque Extender Static, MF 7, Satin Titanium (painted white) - amzn.to/33AOHpc
EKWB EK-HD Acrylic Tube, 10/14mm, 500mm, 2-Pack (sanded for frosted look) - amzn.to/2QbciJY
EK-CryoFuel Solid Cloud White + blue dye - amzn.to/3eGGA0T
►Music
Intro - East Crew by Tomas Herudek
Frosted tubing showcase - Kalax -The Ride (Into The Midnight)
►My Camera Gear
Panasonic GH5 - amzn.to/2JTQpd9
Panasonic Leica DG Summilux 12mm f/1.4 - amzn.to/2sUNU0o
Manfrotto MK290XT - amzn.to/2HQAoiW
Manfrotto MVH502AH Pro Video Head - amzn.to/2JyX4dr
Zhiyun Crane V - amzn.to/2torSCQ
Edelkrone SliderOne V2 - bit.ly/2S5qPWs
Edelkrone HeadPlus - bit.ly/2MoJHdT
Edelkrone SilderPlus - bit.ly/2MnJAiV
Edelkrone Steady Module for SliderPlus - bit.ly/2MbDBQU
Rode NT3 - amzn.to/2MpniNi Rode Lavalier - amzn.to/2LMq7a2
Rode Rodelink Newsshooter - amzn.to/2sVXRuu
MindShift Gear FirstLight 30L - amzn.to/2JEzdsA
Follow us -
Facebook - / ggflanparty
Instagram - / ggfevents
Builds.gg - builds.gg/users/stuart_ggf-5
#O11MiniSnow #ggfmodbuild
@GabbyTech 3 жыл бұрын
more vidoes like these behind the scenes, GGF sharing his secrets ;D
@davea.9927 3 жыл бұрын
Completely agree. Would love to see more of these tutorials.
@GGFEvents 3 жыл бұрын
Yep that's the plan :)
@danmyers2759 3 жыл бұрын
Indeed - more painting tutorials please!
@excelsiusprime 3 жыл бұрын
Yeah, that would be amazing. Sometimes it's really hard to track tubing system in his builds. And it's pretty interesting to know how he comes up with these ideas in the first place.
@hg_id1168 2 жыл бұрын
@@GGFEvents what is the 3080
@ActualKaktus 3 жыл бұрын
The generosity displayed here is mind boggling. Thank you for sharing your techniques. It gives me the confidence to experiment.
@happysad4323 2 жыл бұрын
I alwasy enjoy and appreciate this guy's creativity, imagination, and also considering all the details to ensure every parts will go along well together to get an awesome build
@Dantestoussaint Жыл бұрын
The paint tutorial is fire!! Cheers for that!! Hope the move to Cali has worked out well. Lived there for a bit and enjoyed the people and weather. So positive!
@BradfordRMcKnight 3 жыл бұрын
Video was fantastic! I hope to see more of these videos about more of your over the top builds. Keep it up man!
@gorillaxrich 3 жыл бұрын
Love the technicals to the build ALONG with the build... Outstanding...
@unknowntechio 3 жыл бұрын
Beautiful..no detail left untouched. Very nice!
@GGFEvents 3 жыл бұрын
Thank you
@andrewc20 3 жыл бұрын
love this type of videos ! thank you so much for making this !
@johnfears8814 2 жыл бұрын
Awesome build
@Squinoogle 3 жыл бұрын
I jumped for joy when I saw this was 35 minutes long :D Really loving these in depth looks, and the tips and tricks. I've been rocking the original O11D in white for a while now and I'd never reallised what an absolute pain in the arse it is to match white with white :o It's like every manufacturer has their own idea of what white should be. Thankfully, I'd already decided on a black and white theme, but even that's turned into black-and-white-and-kinda-white-and-grey.
@MafiaGmaer 3 жыл бұрын
This is amazing, so much attention to detail. I am gona steal your idea.
@GGFEvents 3 жыл бұрын
No problem. Haha
@gilbery007 3 жыл бұрын
Thank you so much for doing this video and explaining every step thoroughly to achieve a build like this! 011 Mini Snow White case on order ;)
@rodhester2166 3 жыл бұрын
Awesome job, people do not realize the time, planning and effort it takes to do all the mods, nor do they notice them. cheers.
@ingresosperpetuos 3 жыл бұрын
Amazing work Indeed. I love your art and patience to make everything so good looking. Deserve more subs for your work.
@GGFEvents 3 жыл бұрын
Appreciate it :)
@BARBELLS-AND-BUDS 2 ай бұрын
Nice work
@xxx-ld7wf 3 жыл бұрын
perfect！！ i love it ！！u r god of PC DIY
@yamuiemata 3 жыл бұрын
Gotta love when manufacturers are listening to customers which turns into higher sales of course
@KobraTrading 2 жыл бұрын
Video on motherboard painting would be nice... I REALLY want to do this for next build. Love the detail and everything you go into. It's much appreciated. Subbed.
@porterjeronimo2984 3 жыл бұрын
Classy as always.
@GGFEvents 3 жыл бұрын
Thank you
@harisjaved1379 3 жыл бұрын
I really really like your builds! You and Alex from bit-tech should collaborate on a build to blow our minds!
@sidineirs1954 2 ай бұрын
Lixei os tubos e ficaram muito bons nota 10
@HweeYo 3 жыл бұрын
Love these videos man ! So educational and inspiring ! Im Just wondering if you could do a video about some advice on people who just starting out like me like what goes into your planning on a build and how can you find some decent parts and not too expensive. Sorry if this sounds like something some one already request . Thanks man and always love watching your video 🙏
@d3lsl0w 3 жыл бұрын
Nice build.
@GGFEvents 3 жыл бұрын
Thank you
@marklinton4567 2 жыл бұрын
Thanks for the explanation video. I just picked up this case and will be ordering the PC hopefully tomorrow. Going with a 5800x. It's really hard to find a mATX motherboard that I like that has all the analogue surround sound ports.
@julianthornton 2 жыл бұрын
i like the matching decal you made for the UNI fans, its so funny how everyone complains about the back of the fans and lian li sends a sticker decal with the fans to cover the back of them lol
@the25thproject 3 жыл бұрын
You can install the 360 rads with 3 fans by removing the backs panels first then it will slide in from the back to front of the case with the distribution plate installed
@arian_s_collection 2 жыл бұрын
would this work with an atx motherboard?
@t1edgar93 Жыл бұрын
@@arian_s_collection Yes!
@3XOUT 2 жыл бұрын
Amazing vid going through the build! The only thing missing is info on what size extensions etc. to make sure it’s level with the ports on the Distroplate. Info I had to talk to WK support to figure out. 🙄 I don’t needa timelapse, which is all that comes up when searching on this distroplate (and many other things), I need detail. And this is it! Looking forward to receiving mine next week. Although I def won’t be doing anything crazy like this 😅😂
@AlanGresham 3 жыл бұрын
Hah! I frosted acrylic tubing in last weekends build and NOW I see this 😅 GPU died, so maybe I’ll re-do them with sanding pads. Never occurred to me to do it before doing the bends.
@Carlos-ch4ou 2 жыл бұрын
Plan to build with this same distro plate and radiator placement. what size spacers/fittings are needed to get that perfect straight tubes from distro plate to radiator in/out?
@ruffcutt7630 3 жыл бұрын
I would like to paint the black borders on my case. Any chance you could do a tutorial on how to paint glass. This looks awesome
@Mr_Inception 2 жыл бұрын
a ' Enthusiastic Specialist on Work..!!!
@Revolution05 2 жыл бұрын
@GGF Events i'm planning on making the same type of motherboad plate as what you have done with 1mm thick Aluminium sheet. Question, does the rear motherboard armour get in the way? is it a tight squeeze.. or did you remove the armour altogether and install the mb bare? My motherboard is the Crosshair Impact
@QrentsWorkshop 2 жыл бұрын
HI, what EKWB EK-Quantum Torque Extender Static MF you use on down and up radiators to fit right line and is some different connections can be done on GPU to distro? THX
@cubytischer 2 жыл бұрын
He is ice cool 👍💙
@danmyers2759 3 жыл бұрын
What is the benefit of a custom motherboard tray? Is it to hide cables? Why not just install the motherboard directly in to the chassis?
@loshan1212 3 жыл бұрын
My build, heavily inspired by this one, is almost done! Just waiting for the tubing and one or two things to arrive... Tried to minimise the amount of painting by finding factory white components, like the white Corsair XR5 360 radiator. For the fan stickers, I found this guy on eBay who sells brushed aluminium effect Corsair fan logos. Using a mATX board, so no need to create a custom plate. I spent so many hours trying to do the white o-rings for the distro plate. I'm almost certain it's impossible, even perfectly glued together using Loctite 406, there's extremely tiny gaps where water leaks out. The worst part is once you notice this leak, you have to take off 40+ screws. Putting out a bounty for white o-rings that don't leak, $50 for anyone who's able to do it! I found trying to replicate the exact blue (extremely saturated) to be really, really hard. Instead of the EK Cloud White premix, I bought the 1L one and added half a bottle of EK's blue dye and it's still not as bright! I'm worried adding more blue will make the water dark. First time spray painting, luckily I have a respirator! For whatever reason the white spray paint I'm using (Rustoleum Matt White) takes forever to dry. It's still a bit sticky to the touch after a day. This is with what seems like a decent self etching primer. Found out that putting it into the oven at something like 100C for 4-5 mins seems to help a ton. What probably doesn't help a ton is that I'm in the UK with crappy weather.
@Srv02 2 жыл бұрын
Hey Loshan, did you already succeed in doing the white o-rings? Maybe you didn't tighten them with exactly the same torque? Did you also replace the screws?
@joeelliott8196 Жыл бұрын
one year later...I managed to get the white o-rings on the distro to work but like you said it was a pain. A few lessons I learnt: - Use a craft knife or similar to cut the silicone rather than scissors so that each end of the cord is as flat as possible - I used super glue to bond the ends, holding for 2 minutes while it bonded, like in the video - Make sure the o ring is a mm or 2 over sized so the join in the cord is compressed slightly rather than under tension - Apply a small thread of loctite 595 at the bottom of trench where the o-ring sits the whole way around. You can't see this once it's compressed and dried. Apply this just before adding the o ring and putting cover back on (i.e. wet when you screw back together). I found i needed to do this to get the o rings to stay in place otherwise they would pop out before I got the cover plate back on. I used this 2mm cord from Polymax - www.polymax.co.uk/rubber-cords/white-silicone-cord-2-0mm-diameter - Also add loctite 595 all the way around the bond where the superglue is (i.e. around the circumference of the cord/bond), this will seal any small holes in the joint once compressed. Again do this just before you screw back together I did this on the distro block, gpu and cpu cover and no leaks. Left 24hrs to leak test and no drop in pressure. Has been running for a week with coolant with no issues so far, will update if this changes.
@nachovidal4047 2 жыл бұрын
I want to paint my fitting in white; but my fittings are chrome. How could i do it? I should use the same process like you? Thanks
@nachovidal4047 3 жыл бұрын
I have a clear distroplate and i want to have the frosted finish like you did on the tubes..i could you the same method for my distro? The distroplate has a argb stip on the side; do you think with this frost finish the distro its going to be brighter? Because this would be my porpouse..thanks!
@twoface9622 Жыл бұрын
would an matx Mainboard work with that radiator configuration?
@lovescamaros1 3 жыл бұрын
is that a custom bracket for the ssd to fan mount?
@rainieldungca1311 3 жыл бұрын
what wallpaper did you use in the background?
@deevirus 2 жыл бұрын
This is one of the best builds I've seen up to date! Some aspects of this have been used as inspiration on the build I'm currently working on. There is just one thing I cannot understand, what are the bottom and top extenders that are used used below the angled fittings? Looks like the top has the EK-Quantum Torque 14mm extenders and the bottom could be the 7mm ones but how have they been lifted up to different heights? I assume the extenders used on the GPU block are just the 7mm ones but for the rads?
@Srv02 2 жыл бұрын
Hey Daniel, did you figure out which extensions are needed to lift off the 90° angle fittings above the fans?
@deevirus 2 жыл бұрын
@@Srv02 Hey, I did yeah. I'm using the 14mm extenders (using EK Torgue lineup for all fittings and EK radiators with Lian Li AL unifans). This way the tube will perfectly clear the fans. :)
@Srv02 2 жыл бұрын
@@deevirus Thanks my man! I also got my parts today and they fit perfectly. Looks like GGF had some other revision of the radiators, as mine lined up perfectly with just the 14mm extensions.
@Joozl3 2 жыл бұрын
is it possible to install another 240rads in backround ?
@dallatorretdu 3 жыл бұрын
is there a PCB for the drive cage?
@wyliecoyote1696 3 жыл бұрын
How about painting the motherboard heatsinks?
@user-gk7gr7oz7n 3 жыл бұрын
TOP
@54321jr Жыл бұрын
Great builds. The clarity of the swallowing pisses me off to the point that I almost threw my phone, but besides that, amazing work
@loshan1212 3 жыл бұрын
Do you think it's possible to mount the GPU vertically using the Lian Li o11 mini vertical mount, without having to change the fans or radiators? Do you think there would be enough clearance to do this without changing the tubing too?
@GGFEvents 3 жыл бұрын
Unfortunately only fans will fit on the bottom with vertical mount.
@typerightseesight 2 жыл бұрын
Totally woulda made the only tubes in the build to the gpu. by swapping the radiators around and adding a back fan to the case.
@michaelknight2897 2 жыл бұрын
Do you have to have a micro or mini Mobo or will it work with an ATX (lines remaining level and parallel)?
@GGFEvents 2 жыл бұрын
Can't fit top rad with ATX mobo
@michaelknight2897 2 жыл бұрын
@@GGFEvents someone makes a plate to offset the top radiator.
@pavelgorlachuk1460 3 жыл бұрын
I tried to sand the PETG tube with a fine grit but my tubes revealed some tiny roller trenches along the tube, about 30microns deep, every 2-3 mm. These trenches refused to go away. So bear in mind that XSPC tubes must be either sanded harder, with some 180 grit (maybe?) or left clear.
@GGFEvents 3 жыл бұрын
Hmm that should work. Maybe try sanding pads.
@hg_id1168 2 жыл бұрын
What 3080 is it
@ingresosperpetuos 3 жыл бұрын
Shame that I'm too far away to get one of your build 😢😢
@T4nm4y 3 жыл бұрын
How loud do you find the ST120s? I put 6 in mine and it's loud on its lowest rpm, let alone max RPM 😅
@GGFEvents 3 жыл бұрын
Actually can't hear them at low rpm
@T4nm4y 3 жыл бұрын
@@GGFEvents that's crazy! LianLi said that the noise was expected to be high with 6 fans :/ Have you ever tried measuring it?
@GGFEvents 3 жыл бұрын
Yes I have a reader and will give it a go
@T4nm4y 3 жыл бұрын
@@GGFEvents That is incredibly nice of you! Thank you! (Also a great chance to say how awesome your work is! I aspire to one day build a pc like the ones you showcase!)
@T4nm4y 3 жыл бұрын
@@GGFEvents did you get a chance to test it out btw?
@Yamatoseinsohn 3 жыл бұрын
Are your ST120 fans also a bit noisy... My ones have something like whine. It makes me very upset. I think i got just shit ones
@tuan1510hn Жыл бұрын
The silicone gasket is mm thick
@paskowitz 3 жыл бұрын
Odyssey X overview coming soon?
@GGFEvents 3 жыл бұрын
Very soon. Stay tuned.
@Stanislav7180 2 жыл бұрын
011 ТОП !!!!!!!!! TOP !!!!!!!!!
@LeFGamingThorus 7 ай бұрын
💪💪💪👏👏👌👌👍👍
@calvintan2884 3 жыл бұрын
can i send on PETG tube?
@lovescamaros1 3 жыл бұрын
Yes.
@GGFEvents 3 жыл бұрын
Yes
@ogsecret978 3 жыл бұрын
thats computer porn for sure! great build and get ideas to buid my own o11 mini. :) btw those frozted tubes looks amaizing!
@GGFEvents 3 жыл бұрын
Thank you
@d3lsl0w 3 жыл бұрын
Too bad the distro plate costs like 400 bucks. I don't understand how EK can charge that much. /smh
@betmen01 2 жыл бұрын
33:06 nice swallow
@onimashou8705 3 жыл бұрын
Do a build with a Threadripper in an O11D mini
@GGFEvents 3 жыл бұрын
I've been very tempted
@ashc3765 3 жыл бұрын
Is it just me or does the white paint look pinkish.
@harisjaved1379 3 жыл бұрын
Lol I see it now that you mention it, it’s the fans
@SeaJay_Oceans 3 жыл бұрын
Great Sno Build... Next: CHROME - not the O/S - the Metal... 100% Chrome mirror finish...
@GGFEvents 3 жыл бұрын
Thanks!
@Perodigdug 3 жыл бұрын
Why are all these tech guy's putting Intel in their rigs? Why do they resist so hard?
@philkyle8919 2 жыл бұрын
them fans are well over priced bad cfm and only cost 1.75USD to make each
@tirthkachhia6650 2 жыл бұрын
How do you paint your motherboard. You should at least show us noobs how to do it
@wolf7292 2 жыл бұрын
Lmao they r magnets, ur not gonna get white magnets 😂
Sergio Outdoors
Рет қаралды 40 МЛН
MXC Builds
Рет қаралды 527 М.
Brother-live_mob
Рет қаралды 642 М.