Barricade Trail Force HD Front Bumper Install

No video

Barricade Trail Force HD Front Bumper Install - Extreme Terrain

Рет қаралды 176,381

Күн бұрын

🔔 Please CLICK THE BELL if you want to see my videos! 🔔
[ OVERCLOCK3D Jeeps | o3djeeps.com ]
In this video, I demonstrate the removal of the factory Jeep JK bumper, and the installation of the Barricade Trail Force HD front bumper. This bumper can be found at www.extremeterr... or you can see their entire lineup of bumpers at www.extremeterr....
Product Features of the Barricade Trail Force HD Front Bumper:
*Heavy duty 5/32" steel and 2" x 0.120" tubing
*High strength D-Ring mounts
*9500lb rated D-Rings included
*Built-in winch plate for up to 12,000lb. winch
*OE size foglight housings
*Two stage textured black powder coat finish
*Weight: 79 lbs
*Fits 2007-2015 Jeep Wrangler JK
*3 Year Limited Warranty
Some helpful O3D Jeeps links for you:
Most Recent Upload : goo.gl/z2AFkB
Most Popular Upload : goo.gl/y6bCWo
Check out my Channel : goo.gl/t8crvN

Пікірлер: 171

@ejamesjr6965 3 жыл бұрын

October 2020- they changed the design and not for the better! There are no longer welded studs on the Barricade bumper. The new design has the bolts mounted to a plate which slips behind a welded piece on the bumper. These move in slotted holes and fall backwards behind the plate making alignment a biach! Also now have to mount brackets for the fog lights using very small nuts and bolts in challenging locations. This video is very good but just know that putting on the bumper is now as challenging as taking off the old One hint, if you remove the small fascia behind the stock bumper by removing the retains and sliding out to the drivers side (its tight but it comes out) all bolts and connectors are easily accessible.

@vtecnick89 Жыл бұрын

This is the ONLY relevant comment here. Seems like they paid for alot of "good video v helpful" comments cus this ain't as easy as EVERYONE is saying it is.

@kodiakarcher 6 жыл бұрын

Put this bumper on last weekend. Install took about 1.5 hours maybe 2 but I have a torn tendon in right elbow so I had to go slow. Bumper looks great! Wife wasn't quite as excited but did like the added protection over stock bumper. Haven't put a winch on yet but for anyone wanting to know the weight made my stock jku drop about 3/16-1/4 inch in fender height.

@toddcathey8848 8 жыл бұрын

CPO, just installed mine yesterday. Your video made it a flawless endeavor (once I got the inner bolts loosened--what a pain). Like you said in the video, the hardest part is getting the stock bumper off. Getting the Barricade Trailforce on was a breeze. Also thanks for showing us that the wiring for the fog lights do not have to be spliced to work, only extended out of the wire loom a little. Please keep up the great work with additional videos. You are very much appreciated.

@o3djeeps 8 жыл бұрын

+Todd Cathey Thanks for the report and feedback!

@mdpocoroba 5 жыл бұрын

It's a lot easier to use a ratchet on the two nuts on the inside frame rail by the vacuum canister if you remove the upper fascia in front of the grill first. Then you can access the nuts from the top on the outside of the bumper. This Extreme Terrain bumper has design details almost identical to the Restyling Factory bumpers available on Amazon. I noticed better construction details on the latter, and for much less $.

@dekenangel 7 жыл бұрын

Thanks for the detailed remove/install video. The factory bumper is a real PITA to get off and would have been worse if I hadn't seen this. I would suggest to anyone removing the factory bumper, if you have rust on the nuts and bolts, use WD40 or another penetrating spray. That could have saved both time and effort.

@wtpence4731 Жыл бұрын

Excellent video ! Exactly what I needed to see. Thanks !

@barnwoodbob1 3 жыл бұрын

This is the most helpful video on the internet. The wiring tip was the best. Thanks for saving me a ton of time.

@deanpflaumer7837 8 жыл бұрын

Thank you for the fantastic video! Informative, well edited. Rarely do I see a quality how-to video without needless chatter. This is exactly the info I wanted and nothing extra. Keep up the good work!

@October2525 7 жыл бұрын

I just finished installing this bumper on my 2016 JKU, it took me 2 hrs. What a pain it was removing the plastic inserts for the wire mold. Removing the 4 (18mil) inner nuts, were also a PITA. The instructions do not mention anything about re-installing the factory brackets. Instructions also mention about cutting and extending the wires, I did what you did and it's a nice fit. The only drilling I did was in the plastic cover. Used a 1 1'2" hole for when I install a winch.

@whiskeythrottle182 8 жыл бұрын

thank you for this vid. just installed the barricade front and rear bumpers on my 2016 JK and your videos were great! I'm not very mechanical minded and it still made the install very easy. great job!

@remingtonkevin65 7 жыл бұрын

Jon Matteson any drilling involved?

@whiskeythrottle182 7 жыл бұрын

No drilling. My brother held it in place and I bolted it right in!

@richardhancock641 7 жыл бұрын

Thanks for the video and the winch install video, it let me know to install the winch onto the bumper first, saving a lot of otherwise aggravation. Appreciate your videos.

@hambone4402 4 жыл бұрын

An excellent how-to for JK front bumper R&R. You made it look easy.

@ericf.4258 7 жыл бұрын

Thank you sir! This was another helpful install-video! Your attention-to-detail throughout this whole process was awesome. Your other video to install the rear bumper was on-point as well. Keep up the great work and I'll see you on the trails!

@m.e.9974 3 жыл бұрын

Great info, your not kidding...removing stock bumper on a 2017 Rubicon suckd buttermilk.

@volksman3 8 жыл бұрын

Awesome detail on the front bumper removal, thanks man, you gotta love jeeps!

@dubsmclovin 3 жыл бұрын

Nice job thanks for the video. I hated the fog light screws the most when I did mine

@kennye.8504 8 жыл бұрын

Excellent Video.. I used it as a tutorial for my install yesterday.. Mannnnn.. you were not joking regarding those inside bolts to remove the stock bumper.. Woah

@o3djeeps 8 жыл бұрын

Sweet. Glad you found it helpful!

@BrutustheGladiator 8 жыл бұрын

Cpo's thanks for the videos of the barricade front and rear bumper and 9500 lbs barricade winch install it really helped me out!! you video made it pretty easy to install Thanks

@o3djeeps 8 жыл бұрын

+todd wagoner Awesome! Thank you!

@thaijaybird 8 жыл бұрын

Man. love your videos. thanks for doing them. you showed me a lot and saved me trouble. but you brave wearing those sandals. hope you don't hurt your feet!

@RedCornStudios 7 жыл бұрын

Thanks for the video. I'm sure it saved me a lot of time and headaches. I was able to have all the right tools before I started.

@tedwoe 7 жыл бұрын

Thank you for posting this. I just ordered a new bumper for my 2001 TJ. Very similar to this bumper you installed which looks fantastic by the way!

@billc4868 8 жыл бұрын

I just installed my barricade bumper this week, Its a great product. Not that heavy and looks great. Only problem I had, I order the barricade skid plate. once the plate is on and then bumper you cant get to 4 of the bolts. I ended up taking plate off and returning it. I'm going with the Hanson Skid plate. It mounts to the back of bumper bolts.

@brandonbair 8 жыл бұрын

+Bill C I was looking to buy the Barricade bumper as well as the skid plate... they both wont work together?

@mikedupa5386 8 жыл бұрын

Great video ! I am installing my new bumper tomorrow and will use this video to help walk me through the process.

@jimpeyton1459 8 жыл бұрын

Thank you for this...gave me the nudge I needed to go ahead and replace the stock bumper

@jimpeyton1459 8 жыл бұрын

Completed in less than three hours from unboxing to test drive. Hardest part for me was mounting the foglight housings to the new bumper.

@barz7390 4 жыл бұрын

8:24 you got these nuts!!!😁

@scalejedi3849 8 жыл бұрын

I just ordered that bumper looks easy to install.good video,looking forward to putting on my 2016 wrangler.u did not mention if it fits my year model . I'm guessing it will fit if nothing has been changed from 2015 to 16.thanks for the video. very informative again thanks

@billmitchell2700 Жыл бұрын

Great Video Sir...

@romeo6696 7 жыл бұрын

Sharp looking bumper. I think I'll get one. Thanks for the tutorial.

@mjoet731 3 жыл бұрын

Well I'm sold! Thanks for the great video!

@obuchiteck 4 жыл бұрын

awesome video.. it shows that even I can install this bumper.

@stephaneaudette6665 2 жыл бұрын

Thank you very much for this video

@donewhiskey 5 жыл бұрын

I see that you too wear the safety flip flops. :D

@treymichel1478 8 жыл бұрын

In order to make those driver side bolts easier to take the fog light housing out then go for the bolts

@joncot1812 8 жыл бұрын

Funny story, the "crash bar" may be weaker, but when you hit something hard it will bend and be able to be replaced instead of bending the frame...

@JeepysGarage 4 жыл бұрын

Great video. About to install mine in a couple week.

@HatesUsernamesV2 8 жыл бұрын

Love my Barricade bumper. However, my driver fog light was way too small for the stock fog light. Had to grind and file everything down to get it to fit.

@makeyourownadventure1653 6 жыл бұрын

Nice install, love the look of that bumper.

@wjv88 8 жыл бұрын

Awesome video! In sold on that bumper.

@heatedgreen94 5 жыл бұрын

This bumper looks really good 👍nice video

@allenwayman6809 2 жыл бұрын

In case you didn’t know that’s called an offset box wrench

@lifeofajeeper5235 8 жыл бұрын

Thank you for this video it helps a lot!

@firemanmike1619 7 жыл бұрын

Nice work, go O's!

@HolyJeeps 7 жыл бұрын

Awesome video! I'm loving this bumper!

@remingtonkevin65 7 жыл бұрын

Installed! Thanks for a detailed video.

@clgraham82 7 жыл бұрын

Toe crushing work!

@firstdaddy 8 жыл бұрын

Never use vinyl or pvc electrical tape. It is all crap. The adhesive will separate from the tape and fall off and make a slimey mess. Always use high quality cloth automotive loom tape or self amalgamating tape. Other than that, you made a nice video.

@leonjaney2447 2 жыл бұрын

Problem I have is the bolts are not already attached to the bumper. U literally have put every bolt in. Unfortunately at least with the one I received, it’s not a straight bolt on

@terrencepeeples9117 8 жыл бұрын

CPO - Now that you have had the bumpers for roughly 8 months, would you mind doing an update review (finish on the finish of the bumpers, if you are noticing any rusting/bubbling of paint, if you are still happy with the bumper).

@brianrife7523 7 жыл бұрын

why not remove the fog light first to allow for better access to the bumper nuts?

@rodrigocajas166 4 жыл бұрын

Dude awesome!!!! I getting one !!! $513 front and rear ones from ebay!!!!

@billc4868 8 жыл бұрын

Brandon,I couldn't get the bumper on with the skid plate. I checked a bunch of the forums and some people have made it work. They used different ratchetes or some left the 4 inside bolts off. I'm going to use the Hanson skid plate.

@hohlsito 9 жыл бұрын

Great video!

@o3djeeps 9 жыл бұрын

+gustavo hohl Thanks!

@ThePropSlayer 3 жыл бұрын

Damn bro, in flip flops too

@cmlegend88 5 жыл бұрын

This looks strangely similar to the Rampage Rock Rage Front Bumper... Is this the same?

@jdawg2474 2 жыл бұрын

Do you still have this bumper and how has it held up?

@gamadmex 6 жыл бұрын

Great video, very informative

@CavemanOutdoorsMissouri 5 жыл бұрын

Curious of your opinion of this bumper now

@JKTF476 8 жыл бұрын

Great Video, Can you make one about installing the baricade rock sliders? Prefer unlimited but not sure what you have.

@gibbethoskins8621 8 жыл бұрын

I'm surprised you can winch off that when the it's held on by just bolt threads, seems like it wouldn't be strong enough

@vthump 8 жыл бұрын

Thank you, very informative.

@o3djeeps 8 жыл бұрын

+vthump Thanks!

@MrLeebyunghun 6 жыл бұрын

awesome vid man

@BOONEHOUND1 7 жыл бұрын

I'm about to install one any day now. Why not remove the fog lights completely to make it easier to get to the bumper bolts?

@__KNOX__ 4 жыл бұрын

Jay M says it down below my comment Don’t hit a toe...lol I work on mines barefoot,flip flop, crocs... no sandals I’m not Jesus, or whatever I feel like at the moment. BUT PLEASE PLEASE PLEASE go to 8:22it’s what he says that makes me love this video (it’s a stretch but Come ON that made me laugh besides the explanation of parts tools n dos n donuts of course. Thank you n so does my wife for not being outside working on my Jeep so long..lol

@assigrossman7487 8 жыл бұрын

Thank you for all of your informative videos! Just wanted to know how the Barricade bumpers are holding so far. I like the look and the price point. Thanks in advance!

@sebol931 7 жыл бұрын

Thanks for the video just got this bumper did not put it on yet but I did check if the nuts and bolts go on one of the bolts and nuts does stop after few turns I did use my hand no tools not good with this stuff am I in trouble or I should be fine when I use tools and more pressure any advice would be help thanks

@mikerodgers4089 8 жыл бұрын

Sweet bumper brother. Sweet ring too. #thinblueline

@eVreckd 6 жыл бұрын

I think this is the same Chinese bumper that gets repackaged by various sellers. One of which is EAG or E-Autogrilles which are cheaper on eBay. They are EXACTLY the same. If I am correct that they all come from the same place, and they do (China), I can tell you my EAG bumper is a rusty flaky piece of garbage! My Smittybuilt SRC bumper on my other JK was picture perfect for the whole time I owned it.

@titomauriciobonilla6419 8 жыл бұрын

Good job!!

@o3djeeps 8 жыл бұрын

+Tito Bonilla Thanks!

@brianrandolph3365 8 жыл бұрын

The two additional bolts you put on. Didn't see you add them in the video. I assume you thread in after the bumper is on? And then put the nuts on? Thanks again

@remingtonkevin65 7 жыл бұрын

I ordered this very bumper a week ago. It will be here in an hour or two. I have a '15 Wrangler Sport. Do I need to do any drilling at all? I just took off the stock bumper. Man, that was tuff!

@TheSmokinApe 8 жыл бұрын

Awesome video! What about your license plate? Go O's!

@sinistermind33 8 жыл бұрын

may have been mentioned...but couldn't you just take the fog light housings out first to make the bolts easier to access?

@o3djeeps 8 жыл бұрын

+sinistermind33 Yes...that might be a good option. Someone else I know has done it that way.

@jasem6684 9 жыл бұрын

Can I bring my Jeep over to have you cut my stock bumper? Don't have enough guts to cut my bumper. Great video.

@o3djeeps 9 жыл бұрын

+Jason Majka HA! The first cut is the hardest, LOL! Good news is that if you don't like it, you can pull it off and put on another one. And factory take-off bumpers can usually be found for free. ;-)

@worldmac1 7 жыл бұрын

Great Vid CPO... Let me ask you this... Would you buy this bumper again, and what are some of the pros and cons now that you have had it over a year? Also, did you ever get a set of ratchet wrenches? LOL :D

@jefffuchs6342 5 жыл бұрын

How do you attach a license plate? Maybe the holes are just hard to see in the video.

@italiad1013 6 жыл бұрын

The 2 bolts you get that get screwed into from other side...how Hell do you get those in?? The side slot is impossible....i have a stinger bout to put on n dont understand how they go...help please???

@MrRedman66 6 жыл бұрын

Can't you just remove the fog light housing to get to those bolts?

@blake_pearson Жыл бұрын

Did your front end drop at all from the extra weight?

@NYC-WRX 7 жыл бұрын

Is there space on the bumper to mount a front license plate. NY requires 2 plates. I am really likeing this bumper.

@tannerhall133 7 жыл бұрын

What brand and style rims are those?

@user-zz3nv6hw2s 7 жыл бұрын

nice

@jimt2316 5 жыл бұрын

Any updates on how this bumper held up? I noticed you were sporting another brand in the Moab videos

@pawpaw2524 5 жыл бұрын

I'm thinking of getting this bumper, will it cause front end sagging to my jeep?

@Jlui83 6 жыл бұрын

did you reuse the flat washer, crush washer and nut from the factory bumper?

@sgbowman 4 жыл бұрын

How's this bumper holding up?

@2ndBnGolfCo 8 жыл бұрын

Great video I subbed! Hey how do you like those tires? I'm looking for a 3ply with good winter traction.

@ginogarcia1107 7 жыл бұрын

question did you take the stock skid plate off and put it back on? or did you just remove it completely?

@kalbs89 5 жыл бұрын

Try taking a bumper off a 20 year old TJ... that can be a job. Rust

@GhostSturg 8 жыл бұрын

What kind of lift did you put on your jeep

@steveapplegarth4577 5 жыл бұрын

just curious, how wide is this bumper

@MicMacBA 8 жыл бұрын

Your fog light wiring harness, how did you secured it down? Great videos, always enjoy them

@o3djeeps 8 жыл бұрын

I ended up using zip ties to secure it in a few places.

@jakerhodes8523 Жыл бұрын

What size wire do I need to get for the fog lights ?

@kroakjr 8 жыл бұрын

Awesome vid, sir! Where do you mount your front license plate? I'm also in MD.

@o3djeeps 8 жыл бұрын

+kroakjr Illegally, I think. LOL. You can see what I did in some of my other videos, but I cut out the top and used the fairlead bolts to mount it. If I did it again, I'd just drill a couple of holes in the bumper and just bolt it on.

@edgarestrada2284 5 жыл бұрын

Great video very helpful and for that u get a like and a subscription!!

@ethanbreitenberg1096 8 жыл бұрын

What kind of wheels are those? I like them

@o3djeeps 8 жыл бұрын

+Ethan Breitenberg Mickey Thompson MM-366

@normansateriale9497 6 жыл бұрын

Where did you get the red grille inserts ? Looks great !

@o3djeeps 6 жыл бұрын

It's a custom DIY... gutter guard!

@TacticoolNinja 7 жыл бұрын

Is this the full width bumper? Thanks for the great video!

@tarheel3800 7 жыл бұрын

TacticoolNinja it's more of a mid width bumper

@galaxykitten8630 7 жыл бұрын

how does a bumper like this compare to a bumper on eBay that is half or sometimes a quarter of the price? is this the cheapest best quality bumper?

@dwizl7213 7 жыл бұрын

Ben Lux It's actually one in the same w/ eBay brands such as e-auto grilles. Just a generic super oem budget bumper used by a dozen budget companies, poorly made, cheap powder coat that will peel and flaked within a year. You have to take product product reviews of items made by people that sponsor the KZfaq channel it's being shown on. It's actually sad that people would sell their integrity & put out hyped up, overexaggerated reviews in exchange for mediocre free shit.

@camronk3422 9 жыл бұрын

Great video, planning on installing this bumper tomorrow, looks easy and should be fun. Just out of curiosity, when you cut the wire covering, and there was that blue piece exposed at 10:58 did you grab that from a hardware store? Also, since you cut off all the clips that connected the wire to the stock bumper, did you find that the wires hung kind of "loosely" since they weren't connected somewhere other than behind the fog light? I'm thinking about maybe adding some zipties to keep it clean and snug.

@o3djeeps 8 жыл бұрын

+Camron Kiekintveld The blue section was some plastic wire loom I had on hand. Not required, but you'll end up with a few inches (6-ish if I remember correctly) that is out of the loom when you separate it out. You can add some loom to keep it all protected as stock -- it'll likely be on the passenger side that you really need to add it vs where I put it. The wires weren't really loose because there is just barely enough to reach....but you can certainly zip tie as you find appropriate.

@o3djeeps 8 жыл бұрын

+Camron Kiekintveld And I just realized I missed this comment from 3 weeks ago! LOL! So you are probably already done! hahaha

@camronk3422 8 жыл бұрын

+CPO's Jeep Life Lol, quite alright. I ended up installing it just fine - like you said, you barely even need a video to see how to do it, I just like being absolutely sure on mods before I start taking stuff apart. I also saw your write-up on WranglerForum too so it all worked out nicely! Thanks again!

@jasonziter 9 жыл бұрын

Does Barricade make a rear bumper that accommodates the rear hitch receiver for those of us with the towing package?

@o3djeeps 9 жыл бұрын

+Jay Skeetor No, unfortunately. I also have a tow hitch on my JK. There are really two options at present. Remove your existing tow hitch and use the Barricade "unrated" tow hitch...or cut off the Baricade hitch and leave your "rated" tow hitch in place. My understanding is that it's not rated for towing because that requires additional testing and certification of some sort -- you know....rules. They put the hitch on there to support hitch accessories like bike racks and luggage racks. I do know people pull light trailers as well. I'm probably going to install the rear bumper as well, and will have to make this decision soon.