Jeep JK Bumper stock Removal / aftermarket Install

Jeep JK Bumper stock Removal / aftermarket Install - The Deer Slayer

Рет қаралды 57,652

7 жыл бұрын

Installing the Off Road Joggernaut armor front bumper on the 2016 Jeep Wrangler JK. Includes instruction on how to remove stock bumper. Please stay tuned have a dozen more MODS to install with videos soon. Winch vid coming soon.
Visit my channel for more, like - comment - subscribe...
/ brianealy

Пікірлер: 56

@matthewbaulier1229 2 жыл бұрын

Nice Vid - Thx! Jimmy Deans' got personality, need to keep him around.

@timothyosgood3109 7 жыл бұрын

Thanks for the link. I just ordered it. Great video. I appreciate you responding to me. Take care.

@BrianEaly 7 жыл бұрын

Timothy Osgood - heck yeah... I just ordered the matching back bumper... can't wait.

@NJDRONEMAN 6 жыл бұрын

Ty brother!!! Easiest explained video i found !!! And love the roosters or goats hahaha

@MrQuien 3 жыл бұрын

Super easy explanation. Thanks for the wrench advice... Extremely disappointed that the rooster didn't get to plug his podcast lol

@graham7814 5 жыл бұрын

Great video man! Thanks

@MisterDimos 6 жыл бұрын

nice video man; thanks!

@neilrichards8551 Жыл бұрын

Super helpful video thank u!

@ezzak01 7 жыл бұрын

your awesome bro. I have a rear new bum per to put on and love your video.

@BrianEaly 7 жыл бұрын

Ezzak - thanks man! I will have a new rear bumper coming soon that will match my front... best of luck with your project- take care! 👌

@kimberly2366 7 жыл бұрын

Love it!!!

@JLStreetDoc Жыл бұрын

Looks great

@romanzhitenev 4 жыл бұрын

Hi, Nice video. Awesome job! Where did buy this bumper and what brand? Also, what brand or name for this wrench? Keep making videos. It’s funny.

@jamesbonanno3359 7 жыл бұрын

Nice work, thanks for the video.

@BrianEaly 7 жыл бұрын

James Bonanno - thanks man, much appreciated!

@eddieholder4747 Жыл бұрын

You really improved the look of your Jeep! I enjoyed the video too. I’m gonna change my front plastic bumper too. What brand & model is that bumper?

@musashiblade8665 4 жыл бұрын

Does the plastic guard underneath get reattached ? Also, what about the plastic panel that was removed on the top ?

@jasonlui9988 6 жыл бұрын

How’d you remove the part where the fog light wires are connected to the bumper? Do they just pull out?

@MrJesu84 4 жыл бұрын

Daaaaamn big difference

@POWERLINEHIFI 5 жыл бұрын

Hi what tools and sizes did you use to remove the bumper?

@slugzkea 5 жыл бұрын

How much worse on gas with the extra 125lbs bumper?

@tonyn9965 3 жыл бұрын

Fog light is broke on mine, do you have to take the whole bumper off to replace

@l.a.m7645 Жыл бұрын

The new bumper come with new bolts or did you have to reuse the old bolts?

@Buckfever718 5 жыл бұрын

Did you have to move the vacuum pump?

@wesskinner1733 3 жыл бұрын

Is this bumper still made? Do you have a link to order?

@jjptv819 4 жыл бұрын

Can I get link to order the bumper

@jnamorgan295 5 жыл бұрын

Sweet bumper, but why would you keep those stock fog lights? Even the cheap ebay led's are 100% better.

@aikitkd 7 жыл бұрын

great video I'm just wondering if you had to relocate your vacuum pump..

@BrianEaly 7 жыл бұрын

aikitkd - no relocation was necessary with this bumper... fit perfect. Thanks man, take care!

@aikitkd 7 жыл бұрын

Brian Thanks for the update your jeep looks amazing...

@mkejdo 6 жыл бұрын

Dude, thanks for the vid! What is the name of that wrench you talk about at the 2:50ish mark?

@clgraham82 6 жыл бұрын

Don't the D-rings clang on the bumper knocking the paint off?

@BrianEaly 6 жыл бұрын

clgraham82 - the armor bumpers are powder coated- doesn't do any harm. I wouldn't recommend them on a painted bumper, they would defiantly ruin it. Take care.

@alondralares6526 3 жыл бұрын

Where can I find this bumper?

@haidaral432 7 жыл бұрын

I can't lose the bolts , although I changed the rear one without problems , any idea please??

@BrianEaly 7 жыл бұрын

Haidar amiry - the rear one has seated nuts in the factory bumper... so no wrench is needed on the others side. Just making sure you are stopping the other nut on the blind side of the bumper. (Up in the other side) keep those bolts from spinning. They take some creativity to get to. 🤔

@djtribalonline 3 жыл бұрын

Can the stock bolts be used for the aftermarket bumper ? Or does it have to be different ones?

@BrianEaly 3 жыл бұрын

The stock bolts work perfect. No drilling or anything. 👌

@jackbainbridge3572 7 жыл бұрын

How did you remove the two bolts just to the left of the driver side? There are parts in the way on this side that were not on the passenger side.

@BrianEaly 7 жыл бұрын

Jack Bainbridge - I used a ratcheting combination wrench with a swivel head over there... they will cost you 20-40 bucks for a set, but they always keep finding solutions... thanks man, best of luck!

@jackbainbridge3572 7 жыл бұрын

Thanks! Worked great

@MR-2_AW11 6 жыл бұрын

I've got some kind of screw clips for the skid plate I'm trying to figure it out any ideas?

@BrianEaly 6 жыл бұрын

zMrToothlesS - I'm trying to remember... mine has been gone for a long time... I think it has those clips where you loosen the center Phillips head nut in the center about a 1/4", then use a flat head screw driver under the widest part of the clip against the frame to pry out the whole clip/anchor. Think there were about 8 of them. I ran a search for it on here and couldn't find anything... sorry I forgot to cover that. Best of luck man. Take care.

@pimpmyride7278 6 жыл бұрын

Brian Ealy.....why did you get rid of the bumper?

@mr.r5807 7 жыл бұрын

Nice looking bumper. Do you have the link for it?

@BrianEaly 7 жыл бұрын

Mr. R - thanks man, I found a one page deal... can't find another link to it, but it is an Off-Road Juggernaut heavy armor bumper. Runs about $450-$700 depending on where you find it. If I can find another purchase link I will let you know. Take care man!

@kennyj342 5 жыл бұрын

@2:50. Ooooooooooo i want that

@timothyosgood3109 7 жыл бұрын

Where can you buy this bumper? I can't locate it.

@BrianEaly 7 жыл бұрын

Timothy Osgood - dang man. I couldn't find it for somebody 8 months ago and I just found it... it is so much cheaper, you gotta get it! www.ebay.com/itm/252402781041 ... I bought mine over a year ago, it was $150 more than that.... telling you, it fits perfect! Take care man. Best of luck.

@RadiantSilverlighter 4 жыл бұрын

You didn’t show how to attach the new bumper :(

@Rickugg 3 жыл бұрын

Hello: Someone ask me how long does it take to put your bumper on in order to charge me. Well this video was 6:58....I hope they buy that. What kind of bumper was it. 125 pounds,,,Now thats a real bumper !!!!

@backroom12 7 жыл бұрын

What about that vacuum canister ? Didn't get in the way ?

@jamesbonanno3359 7 жыл бұрын

You can work around the vacuum canister with some simple hand tools. It helps to have an extension and a swivel ratchet. I just installed a Smittybilt carbine bumper and winch and really had no issues with the install.