No video
OBS Chevy Truck LS Swap Build part 8 the Fuel System
Рет қаралды 12,694
Күн бұрынWe had a bit of fair weather for a couple of days so I took the time to get a start on the fuel system for our 96’ Chevrolet GMT400 OBS LS Swap project. Normally within years 96-98, you can get away with using the stock fuel pump to feed a stock LS motor but after noticing the condition of my fuel lines and everything else underneath, I decided that it would probably be best to just start from the beginning and replace everything. Luckily I didn’t have to replace my entire fuel tank but everything else is is brand new.
The fuel line kit I ordered from scamazon and the other miscellaneous fittings came from scummit. If your OBS is between 88-95 or of you have a square body c10 and you’re doing an LS swap, then you will likely have to replace your fuel pump and lines as well.
This is how I went about doing mine.
Thanks for watching.
@datdude_jcole9275 3 ай бұрын
Much obliged for the clear cut details!
@shanonboykin717 Жыл бұрын
Been looking for a detailed series like this thanks!!
@247willg 2 жыл бұрын
I really like your videos...you had me at c-10..... keep your videos comming
@siTTinLo 2 жыл бұрын
Thank you. As long as I have something interesting or worth teaching I will try my best.
@oakdasmoke Жыл бұрын
Hungry for some rusty granola bars 😂😂💀 2:26. Btw great info on the swap. Appreciate it ✅
@eduardopena489 2 жыл бұрын
Good stuff bro 😎
@siTTinLo 2 жыл бұрын
Thank you. 🙏
@DesignRejectsZ 4 ай бұрын
Which line was the feed and which was the return? I bought a truck with the pump missing so this is a puzzle for me
@carlosiramhernandez9103 3 ай бұрын
What's up friend, can I use the pump of a Camaro 97 5.7 on my Cheyenne 93 to feed my 5.3 from 2002?
@armaletalia3254 2 жыл бұрын
9:51 LMFAO
@alfredoespinoza94 2 жыл бұрын
How much do you charge for the wire harness for my 1996 gmc sierra I have the 1996 wire harness for the 1996 and the donor truck is a 2002 chevy silverado with the 4.8 vortec and the 4.8 wire and ecm computer to look like your sir
@jarredhitchens5791 Жыл бұрын
Where did you run the other vent line too? One from the filler neck to pump, how bout the other one?
@siTTinLo Жыл бұрын
That line was good so I didn’t need to replace it but that line goes up front to the charcoal canister underneath the hood.
@lenovo859 Жыл бұрын
Do you have to change the fuel pump ? I have a 1992 c1500 that had a 4.3 and going with a 4.8 ?
@woahtay3429 Жыл бұрын
yes
@woahtay3429 Жыл бұрын
4.3 is a v6 and swapping to a 4.8 will need alot more fuel getting dumped into just the 2 extra cylinders.
@datdude_jcole9275 3 ай бұрын
Did you use the 3/8 or 5/16 lines?
@siTTinLo 3 ай бұрын
I’m pretty sure the lines were 3/8”.
@datdude_jcole9275 3 ай бұрын
@@siTTinLo thank you a lot! I got the kit ordered. After 3 years+ on this build I’m finally getting into the short rows
@glolife207 Жыл бұрын
Buy stock ls your mean not even a cam?
@jesselockard9541 2 жыл бұрын
What are you using on the frame to cover the rust?
@siTTinLo 2 жыл бұрын
I uses a product called POR 15 on this truck and pre treated the frame with phosphoric acid first.
@raulcruz4182 Жыл бұрын
Do you have the part # for the fitting for the fuel pump to the lines?
Laurenceville Garage
Рет қаралды 69 М.