How to LS swap 95 OBS (PART 3)

Рет қаралды 37,440

11 ай бұрын

On this video I'm showing how to LS SWAP your 88-98 OBS. There are many ways and different combination on how to do a LS SWAP but at least you will get an idea of what all you need to do. Like always I'm hoping this helps many people out there and if you have any questions, I'll do my best to respond as quick as I can. Please subscribe and share my videos if you haven't already to help grow the channel and hit that like button for me! Also feel free to message me on Instagram to get a quicker response (Sups_Garage) God bless you guys and I'll see ya'll on the next video!
Add me on Instagram! Sups_ Garage
/ sups_garage
Part Lists
6AN Radiator Transmission adapters
a.co/d/9SkNHz2
6AN Steel Braided Transmission Lines
a.co/d/dsrYF5V
6AN Radiator to Transmission Lines adapter
a.co/d/ggpfihZ
6AN Steel Braided Fuel Lines
6AN Transmission line adapters (Came with this fuel line kit)
a.co/d/ikbDzBP
6AN Return line adapter
www.summitracing.com/parts/RU...
6AN Fuel Filter Adapter
a.co/d/d1ojc9L
Temperature Sensor Adapter
a.co/d/b9vZFoC
Standalone Harness
a.co/d/hvlVLn6
Mass Air flow Sensor
a.co/d/gGRISXd
O2 Sensors
www.summitracing.com/parts/ad...
EV1 to EV6 Injector Adapters
a.co/d/1hOYuBY
Spark plugs
a.co/d/1I4Bjm7
Drive Belt
Part# 1105K6
Low Profile Oil Pan
a.co/d/74vpnX6
R4 A/C Bracket
a.co/d/8e0fsQO
Oil Pressure Sensor Adapter
a.co/d/iQX2Auy
A/C Lines
a.co/d/eRThLrd
Radiator Stem Port Fitting
www.oreillyauto.com/detail/c/...
Shorty Headers
speed-engineering.com/collect...
Motor Mounts
a.co/d/eKgQcMb

Пікірлер: 279

@rubensalais1502 5 ай бұрын

My friend, I want to thank you for the detailed videos showing the whole swap. Your videos are the most explained, and on top of that, you give us the parts list, 👏

@SUPSGARAGE 5 ай бұрын

Thanks brother! Glad it helps you 😊👍!

@kevinhollingsworth5816 10 ай бұрын

That was very informative!! I have a 95 K1500 that im wanting to put a LS in. I will definitely have look back to these videos when i start working on it.

@vagooro4641 8 ай бұрын

Thank you so much ❤ i really been debating doing a swap but I made up my mind no one really explains the steps and you did them very well

@carlostrujillo2248 9 ай бұрын

Wow, thank you so much for putting that out there your three part video on installing your LS really motivated me into making an install on my sons truck. Thank you so much.

@SUPSGARAGE 9 ай бұрын

Thank you for the support brother 😊👍

@greggalindo6714 15 күн бұрын

Thanks for responding so quickly! I replaced the entire unit. That could be the problem.😅

@SUPSGARAGE 15 күн бұрын

@@greggalindo6714 np brother 😊👍

@williamjrbaltazar4612 9 ай бұрын

I love this video I been so scared to do one and been second guessing my self but this gives me reassurance

@SUPSGARAGE 9 ай бұрын

That's what these videos are for brother! You won't know till you try 🤷‍♂️😊

@SprayWayCustoms 8 ай бұрын

Good stuff man. I watched and saved all three videos of the swap to my playlist for future references 🤝

@SUPSGARAGE 8 ай бұрын

thanks for the support brother 🙂👍!

@jerez.2133 5 ай бұрын

Bro thank you so much for all your help and sharing your knowledge this simplifies everything thank you

@SUPSGARAGE 5 ай бұрын

Glad it helps brother!

@gainz_9126 8 ай бұрын

Very sophisticated approach..💯

@sbickmore15 4 ай бұрын

I'm swapping my 98 so thankfully the fuel pressures are good, but I I had to drop my tank anyways to replace all the lines with AN. Your vids have been absolutely Paramount in helping me finish this build. Thank you.

@SUPSGARAGE 4 ай бұрын

Glad it helped you brother and hope you project goes great!

@12408ca 4 ай бұрын

Bro these breakdown videos are gold . Thank you !

@SUPSGARAGE 4 ай бұрын

Glad it helps you brother 😊👍

@edgaravelar2750 6 ай бұрын

Sounds great with the headers! Also thank you much for all the details!

@SUPSGARAGE 6 ай бұрын

Thanks brother! hope the video helps you!

@T-S-SmallengineRepair 10 ай бұрын

great video!

@joshuaavila8317 2 ай бұрын

Super informative video love it I’m going to buy a 1997 obs from my coworker he owned it since 2000 he’s the 2ed owner I told him I’ll take care of the truck I will ls swap it for the power but and reliability. I will do a stock swap 5.3 from my 2005 sierra which I’ll order a new engine for since it’s a daily

@chuckweezr 3 ай бұрын

Great vids. I am just starting a swap into my '88. I have a complete '02 tahoe that I plan on using the L59, 4L60 and the posi 3.73 disk brake rearend. I hope I can use the harness from the '02 to make things easier

@timothyryan2847 5 ай бұрын

Thanks, I'm getting plans together for a OBS swap . These videos helped a lot

@SUPSGARAGE 5 ай бұрын

Glad they help you brother and good luck on your project!

@kennethgray1743 8 ай бұрын

Great Video I’m going back to watch some of your other videos.

@SUPSGARAGE 8 ай бұрын

thanks for that brother!

@mauriciocaloca7594 5 ай бұрын

Great vid man much help provided and details

@SUPSGARAGE 5 ай бұрын

thanks brother 😊👍

@erickherrera8225 2 ай бұрын

Thank you for explaining step by step you are going to save me a lot of money when I do my swap

@SUPSGARAGE 2 ай бұрын

Happy to hear that brother! and thanks for the support!

@nolove332245 10 ай бұрын

I really ty for the parts list! Making my life so much easier this will be first time going with a LS and this is the best video i have seen! Ty so much im sure i will watch them all again lol im about 2 weeks away from getting the project going

@SUPSGARAGE 10 ай бұрын

Glad it helps you! if you start don't stop till you finish it! and you can message me on instagram if you have any questions! sups_garage

@nolove332245 7 ай бұрын

I am in the final stages of wiring ty so much for the great videos I've watched a few times! And ur parts list was on point! I did end up doing alot more upgrades then I planned which is why I'm not done yet 2 months later lol. I also deleted neutral safety switch cause I have a 93 I have one built in the sterlering column so that worked out cause I have shifter bars vs cable. Again ty!

@nolove332245 7 ай бұрын

What intake breather is that?

@SUPSGARAGE 7 ай бұрын

Happy to hear that brother! and I didn't add the air intake to the list cuz I felt like it's over priced but was the only thing I can find that fit but here you go! LS Swap Cold Air Intake - Black... www.amazon.com/dp/B0842BMTZ5?ref=ppx_pop_mob_ap_share

@nolove332245 7 ай бұрын

@SUPSGARAGE 249 little on high side but looks clean on the install so def ok with paying that! Ty again.

@oscarlopez2599 5 ай бұрын

Great information, very thorough

@SUPSGARAGE 5 ай бұрын

Thanks brother!

@jerez.2133 5 ай бұрын

Thank you for sharing all your knowledge I really appreciate it I have a 1990 that I want to swap with my son

@SUPSGARAGE 5 ай бұрын

Glad it helps u brother! hope ur project goes well!

@theroadjack3437 9 ай бұрын

Great informative video! Love it. I don’t see why everyone says these 95s are hard to Ls swap… seems straight forward. Only question I have is was your truck a v8 or v6? Reason being is I’m looking to Ls swap my 95 one but it’s a v6. Not that I think much is different

@SUPSGARAGE 9 ай бұрын

thanks brother! Mine was a V8 but for urs, you just need to replace your V6 clam shells to V8 clam shells (the motor mounts) and you should be good

@overnovacated6481 9 ай бұрын

He'll yeah!

@WakeUp701 7 ай бұрын

Nice 👍

@706offroad Ай бұрын

Thank you

@WilliamJenkins-tx5jr 5 ай бұрын

I plan on doing a 6.0 or 6.2 LS swap on my 96 Cheyenne but I'm lucky it's a 5 speed so there's not as much electronics

@BryanAlcala-wv6eo 8 ай бұрын

I appreciate this video you saved me $1500 on engine harness was about to order bp automotive harness not sure the difference between Amazon and bp

@SUPSGARAGE 8 ай бұрын

Glad it helped you brother 😊👍!

@ChrisDavis-ng1xv 6 ай бұрын

Nice job and to the point did you have to do any cutting and all that splitting and connecting to your stock harnesses or just plug in those few plugs and grounds that you displayed in your installation videos

@SUPSGARAGE 6 ай бұрын

Thanks brother! and it's both cutting into the wires to splice into the orginal harness making sure the grounds were connected

@artm700_ 5 ай бұрын

Bought a step side 90’s short bed and planning on doing the swap pretty soon, I’m only confused on the wiring which seems like the hardest part of the whole swap, do you have an instagram or something to answer questions? Would really help me a lot with the swap thanks again for the informative videos you’re the man!!

@SUPSGARAGE 5 ай бұрын

Of course I do brother look up sups_garage on Instagram 😊👍

@valdezerick 8 ай бұрын

🤝You give me the confidence to do my swap in my 1996 gmc … But one question what happens with the ECU from the 5.3 engine ? I need to reprogram because they come whit the antithef sistem ?

@SUPSGARAGE 8 ай бұрын

glad to hear that brother! and I left mine plugged in cuz I didn't wanna risk the chance of something not working right but I heard u can remove it if you do do it once you know it's running and you only have to program the LS computer (remove the vats for it to run)

@1300Poochie 3 ай бұрын

God gone bless you for helping his lost children lol

@SUPSGARAGE 3 ай бұрын

🤣🤣🤣 that's the first hearing that one brother!

@jermainortiz8682 4 ай бұрын

Very detailed video, Thank you! Can you drop a link for the radiator and electric fans you used?

@SUPSGARAGE 4 ай бұрын

Thanks brother! this is the radiator I used OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share But I ending up having to upgrade the fans to these because the ones it came with were not strong enough American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share

@cesartorres7976 10 ай бұрын

So stupid question… you need your stock harness and computer…? I’m doing the swap rn and your videos helped me a ton!!!

@SUPSGARAGE 10 ай бұрын

I wanna say yes to keeping the orginal ECU in my case cuz I was still using some wires from it to work with my LS and I just trimmed the orginal harness, keeping only the things I needed brother and glad the video helped you 🙂👍!

@Alejandro1995obs 5 ай бұрын

Swapping my 95 this summer bro 🫡🫡

@SUPSGARAGE 5 ай бұрын

message on Instagram if you got questions brother 😊👍 sups_garage

@MOE13576 10 ай бұрын

Man, thank you so much for this. 🙏. This is the only video/s that showed how to remove the engine and transmission that i found. And the details 🤌. Subscribed 👍

@SUPSGARAGE 10 ай бұрын

Glad it helped you brother! and thanks for the support 😁👍!

@MOE13576 10 ай бұрын

@@SUPSGARAGE anytime 🤝

@hebrewnation9 9 ай бұрын

Man great video it deserves millions of likes and views !

@SUPSGARAGE 9 ай бұрын

Thanks for the support 😊👍!

@smokey5245 24 күн бұрын

Do these headers work for a 2012 5.3l ls using them on a 1997 obs k1500?

@bobbywells8408 Ай бұрын

Very very good video one of the best i watched so far only thing i don't get is why you didn't use the trans plug i thought you were using the 4l60 that came in it but maybe i need to watch again

@SUPSGARAGE Ай бұрын

Thanks brother and I used the 4l60 that came with the LS motor not my orginal one. That's why I didn't use the plug.

@bobbywells8408 Ай бұрын

@@SUPSGARAGE is it ok to use the original 4l60 as that's what's in my truck

@SUPSGARAGE Ай бұрын

that I don't know brother because they were different years and the 95 model has a few things ONLY the 95 had, I did not wanna risk trying to find out if I needed spacers or a certain flexplate it was just alot easier to put everything my LS came with.

@bobbywells8408 Ай бұрын

@SUPSGARAGE ok thank you so much probably best just to use the whole drive train then out the Tahoe then thank you so much for the response and your video was amazing especially putting the links to everything straight up game changer for anyone trying to do a ls swap

@SUPSGARAGE Ай бұрын

thanks brother I'm here to help 😊👍!

@etorrez95 9 ай бұрын

Hey man where did you get that radiator bracket @<a href="#" class="seekto" data-time="1029">17:09</a>? Looking for something like that.

@SUPSGARAGE 9 ай бұрын

it came with the truck brother and its been on there since the 90's so I wouldn't know where to get it from lol

@MOE13576 6 ай бұрын

Good afternoon man. Do you remember if you connected the white(86)or black(85) wire from the fan(s) relay to the green stand alone wire ?

@SUPSGARAGE 6 ай бұрын

85 is the one I connected to the green wire that comes from the LS harness brother

@MOE13576 6 ай бұрын

@@SUPSGARAGE thank you man.

@gthomas5880 6 ай бұрын

Nice build. What alternator did you upgrade to. Im currently havin same issue with fans. Volts when charging are under 13 volts. Also have a link for plug wires you are using.

@SUPSGARAGE 6 ай бұрын

Thanks brother and this one was the one I used Check out this page from Summit Racing www.summitracing.com/parts/pwm-48237

@gthomas5880 6 ай бұрын

@SUPSGARAGE cool thanks for link. What about plug wires. I like the way those fit that you have. I've went through couple sets. Those look like what I need.

@SUPSGARAGE 6 ай бұрын

@gthomas5880 they came as an option to go with the headers I bought from speeding engineering

@sega2229 7 ай бұрын

Thinking about swapping my 90 c1500 why do I need to use my old obs harness can’t I just swap the motors and use a stand alone harness?

@SUPSGARAGE 7 ай бұрын

u only need to use what u need from it brother if ur wanting ur guages to work n keep all ir grounds

@subarutime5089 7 күн бұрын

I have a nv 4500 in a 06 yukon with a 5.3 from a 2002 and i had to do all of this and more nothing is the same everything chages from 94 to 96 to 2000 to 04. Everything lights ,wipers,seats,door panels,dash ,foot pedals,back window,abs brakes , steering wheel, mirrors ,cpu ,gauges ,carpet wire harness ac condenser,heater core fuel pump ,gas gauge is backwards full is empty 😅

@bradywilliams1708 4 ай бұрын

You happen to know if the harness you used would work and plug into the factory trans on an obs of this year? Just wanna swap the engine and not the transmission.

@SUPSGARAGE 4 ай бұрын

I wanna say yes but just don't know if the pin out is the same brother

@bradywilliams1708 4 ай бұрын

@@SUPSGARAGE I guess I’ll find out when I get there may have to splice in my own connectors.

@user-wo5gu6mg9b 8 ай бұрын

I am putting a ls3 in a 4x4 tahoe and can't find exhaust manifolds that fit do you know what works Thanks

@SUPSGARAGE 8 ай бұрын

sorry brother I have not done one like that yet to know 😔

@darey1231 7 ай бұрын

<a href="#" class="seekto" data-time="426">7:06</a> also where did new purple and green wire come from?

@SUPSGARAGE 6 ай бұрын

the purple and green wire are from the LS harness. It's the connection that goes to the speed sensor brother

@bryanwalters180 4 ай бұрын

Thank you for your breakdown on this swap I’m currently in the process of doin one myself. I do have a question though. Do you have a email I can contact you so I can breakdown exactly what I got?

@SUPSGARAGE 4 ай бұрын

Do you have Instagram or Facebook brother?

@mikeromero2776 9 ай бұрын

Hi there about the two wire off the coil do I connect those two with the one off my new harness together

@SUPSGARAGE 9 ай бұрын

do you mean the red and the white wire that went to the original coil on the TBI engine?

@mikeromero2776 9 ай бұрын

Yes

@SUPSGARAGE 9 ай бұрын

@mikeromero2776 yes the red one will go to your new harness that is labeled ignition (should be red also) and the white will go to your white one from your new harness as well brother

@mikeromero2776 9 ай бұрын

Ok sounds good thank you for the info.

@gerardolopez5875 6 ай бұрын

How about 88-89 moonies gauges? Wil yhey work on ls swaps

@SUPSGARAGE 6 ай бұрын

that I don't know since my truck did have them

@fulgenciocaballero6420 Ай бұрын

Any video on wiring harness? Out of lume?

@SUPSGARAGE Ай бұрын

u mean the factory one brother?

@caspercook7337 6 ай бұрын

did you use the 1995 4L60E trasmission with the LS motor ? ?

@SUPSGARAGE 6 ай бұрын

no I used the one that came with the LS engine brother

@mikeromero2776 9 ай бұрын

Hey there, about the fuel pump wire off the stand alone harness which pin on the fuel relay off the fuse block did you tap in to after all

@SUPSGARAGE 9 ай бұрын

with Standalone I did nothing with regarding the fuel pump brother I only messed with the stock fuse box from the truck I just needed a wire that has power when the key is on to power the relay from here on (I did not run power straight to the fuel pump, just the relay)

@mikeromero2776 9 ай бұрын

Sounds good brother I appreciate your good information

@Brandon_obs_ls 7 ай бұрын

@@SUPSGARAGEwhat harnesses did u buy

@SUPSGARAGE 7 ай бұрын

@Brandon_obs_ls this one here brother but make sure you know what injectors you have other wise ur gonna have to get some adapters like I did ZZCSZ LS Standalone Wiring Harness 4.8 5.3 6.0 Compatible with 1999-2006 GM Vortec Engines 4L60E with Adapter Transmissions Complete Wire Harness for Fuel Injection System DBC Engine Harness a.co/d/7StKdtu

@Brandon_obs_ls 7 ай бұрын

@@SUPSGARAGE thx for the information ima sub

@klassena1995 4 ай бұрын

I'm doing a ls swap to my 98 Chevy Shorty. I'm stuck on how to get my fuel gauge to work. And need some help on that

@SUPSGARAGE 4 ай бұрын

Was it working before the swap brother?

@hebrewnation9 9 ай бұрын

Hey buddy is fuel pump MPE16008 still holding up for you ?

@SUPSGARAGE 9 ай бұрын

Yes sir!

@billycooper9879 7 ай бұрын

What about the cold air intake? What part is that from Amazon? You did not say.

@SUPSGARAGE 7 ай бұрын

I did not list them because I felt like it was over priced but was the only one I can find that would fit here you go brother LS Swap Cold Air Intake - Black... www.amazon.com/dp/B0842BMTZ5?ref=ppx_pop_mob_ap_share

@kevxx19hernandez71 3 ай бұрын

Question 🙋🏻‍♂️ik is stupid but what color was the wire that u connect to the white wire for rpm and do I need to wire both ignition and rpm ? To get the tach to work thanks

@kevxx19hernandez71 3 ай бұрын

Figured it out lol

@SUPSGARAGE 3 ай бұрын

Sorry brother I missed this comment from you 😔 but I'm glad you figured it out 😊👍

@marcogutierrez7916 3 ай бұрын

Whats the part number for radiator with the fans? Thanks awesome video

@SUPSGARAGE 3 ай бұрын

@marcogutierrez7916 3 ай бұрын

@@SUPSGARAGE thanks man!!!!!

@marcogutierrez7916 2 ай бұрын

Do you have the part# for the oil filter lol. Thanks

@SUPSGARAGE 2 ай бұрын

@marcogutierrez7916 i do not brother but it's an oil filter from an 03 tahoe

@marcogutierrez7916 2 ай бұрын

Did you had to rig some things for that radiator to fit? Thanks

@SUPSGARAGE 2 ай бұрын

No the radiator fit just fine brother

@my95chevy 6 ай бұрын

So for the fuel pump did you just run a jumper wire from Pink to the green wire? Also the wires from the original engine did you cut them off and tuck them back in the original harness?

@SUPSGARAGE 6 ай бұрын

yes to both of your questions brother

@my95chevy 6 ай бұрын

Sweet thank you getting this 6.0 ready to go in! It's dbw do you think there's anything really different?

@SUPSGARAGE 6 ай бұрын

@my95chevy95 I would think it's just gonna b the election pedal n also if your fuel lines are returnless but that should be about it brother

@my95chevy 6 ай бұрын

Ok cool thanks again saving my life over here lol good work my friend!!!

@SUPSGARAGE 6 ай бұрын

@my95chevy95 No problem brother 😊👍

@jasonkellyfixico70 3 ай бұрын

What did you do with the unused wires from the original wire harness?

@SUPSGARAGE 3 ай бұрын

@jasonkellyfixico70 I cut them off brother but only do that once it's running and everything works!

@lupitavences499 6 ай бұрын

For the fuel pump do you mean from a 1996 model Silverado

@SUPSGARAGE 6 ай бұрын

Yes that is correct

@mikeromero6425 8 ай бұрын

hey bud how did you get your factory fuel gauge to work

@SUPSGARAGE 8 ай бұрын

kept my factory computer in and just kept all the grounds brother nothing special I had to do

@justwatchme848 5 ай бұрын

Where did you find the adapter for the steam port off the radiator

@SUPSGARAGE 5 ай бұрын

at Oreallys brother

@BryanAlcala-wv6eo 8 ай бұрын

What transmission crossmeber r did you use?

@SUPSGARAGE 6 ай бұрын

the original one that was already on my truck brother

@anthonygonzalez3522 7 ай бұрын

I having problem with my swap. My abs anti lock is on. Idk how to fix that problem

@SUPSGARAGE 7 ай бұрын

lol mine has always been on even before my swap I just took the bulb out 🤣

@jesusdeleon5596 9 ай бұрын

You have a part number to the cold air intake set up

@SUPSGARAGE 9 ай бұрын

Yes I do but I don't recommend it cause of the price but it was the only thing I found that would work lol LS Swap Cold Air Intake - Black LS1 LS2 LSX Restomod A-Body G-Body Camaro Chevelle GTO Monte Carlo Caprice a.co/d/cSfP13K

@jamesmendoza7980 9 ай бұрын

How did you get the spedometer to work ??? You said you did not use the speedometer wire on video (1) .. but in this videos the speedometer is working ?.?.. did you end up Using the wire? If so to what wire on the obs .. tia!

@SUPSGARAGE 9 ай бұрын

I spliced the 2 speed sensor wires from my LS harness into my 2 wires from my orginal speed sensor harness to get the signal readings to go to my gauge as well does that make sense?

@jamesmendoza7980 9 ай бұрын

7:04 thats what you talking about?..

@SUPSGARAGE 9 ай бұрын

@@jamesmendoza7980 yes sir

@shodawg7580 6 күн бұрын

Can you tell me which radiator did you use, and did you go through the firewall with your harness

@SUPSGARAGE 6 күн бұрын

I left mine just underneath the hood on the driver side brother Here is the radiator but I had to upgrade the fans to the link below the radiator link due to the fans it came with were not strong enough for my swap brother OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch Upgraded 180 Watt Motors 12 Volt Electric Radiator Cooling Fans Reversible Air Flow Highest Performance 5528 CFM a.co/d/07Bm2NH1

@shodawg7580 3 күн бұрын

Thanks for the help

@SUPSGARAGE 3 күн бұрын

@shodawg7580 no problem brother

@lucciguerrero29 6 ай бұрын

What kit for the fuel sistem did u use

@SUPSGARAGE 6 ай бұрын

This one here brother EVIL ENERGY 6AN 3/8" PTFE LS Swap EFI Fuel Line Fitting Kit, E85 Nylon Braided Fuel Hose 25FT a.co/d/cM8wb4v

@emtfire20 6 ай бұрын

Do you have a part number for the fuel filter and fuel pump ?

@SUPSGARAGE 6 ай бұрын

Here you go brother filter is 33481 and fuel pump is MPE16008

@emtfire20 6 ай бұрын

Thank you

@Eli_Sellars 13 күн бұрын

i’m thinking about LS swapping my 1990 c1500. i have a 2002 suburban as my donor and i was wondering about the PCM, i’ve heard everywhere else that you have to tune it but unless i missed it i don’t remember you mentioning that. is it not necessary? thanks in advance

@SUPSGARAGE 13 күн бұрын

@Eli_Sellars you do have to delete the vats, egr, rear 02 sensors, set your rpms correctly, etc so yes it's best to buy computer already tuned or your gonna have to get yours tuned anyway

@Eli_Sellars 13 күн бұрын

@@SUPSGARAGE where did you get yours?

@SUPSGARAGE 13 күн бұрын

Mine was already tuned ready when I bought the engine and transmission but I did end up buying the software (hp tuners) to change things I wanted later

@SUPSGARAGE 13 күн бұрын

you can buy them tuned ready from ebay but just make sure you buy the correct pcm for your engine

@Eli_Sellars 13 күн бұрын

@@SUPSGARAGE do you think it would be worth the money to just buy HP tuners and do everything i need to do on my stock ecm? sorry for all the questions😂

@ULISESBRAN 2 ай бұрын

How did you make the voltage gauge to work ?

@SUPSGARAGE 2 ай бұрын

I didn't have to do anything to make that work just make sure all ur grounds are connected and it should work brother

@tremainethomas9112 9 ай бұрын

How did u hook up the power line from the injection for fan

@SUPSGARAGE 9 ай бұрын

I used it to power up my fan relay brother when the key is on.

@tremainethomas9112 9 ай бұрын

Ok so u hook it up to what wire on the relay

@SUPSGARAGE 9 ай бұрын

@@tremainethomas9112 message me on Instagram brother it will be easier sups_garage

@Slayer-oq8fv 7 ай бұрын

Great video. Should have pulled the bed off it for the fuel pump.

@eduardoguerrero3444 10 ай бұрын

Did you still us the original a/c lines for the compressor or got different ones?

@SUPSGARAGE 10 ай бұрын

had to get different ones brother the orginal ones would not work anymore

@eduardoguerrero3444 10 ай бұрын

Do you have the part number of the one that you use or a link?

@SUPSGARAGE 10 ай бұрын

Yes sir here you go brother www.amazon.com/dp/B00SLKRIHE?_encoding=UTF8&psc=1&ref_=cm_sw_r_apan_dp_9K8YVS1YQXNT8DRCNDQ7

@heribertojimenez447 3 ай бұрын

Great video man I saw you posted the link for the hoses do you happen to have the link for the compressor as well I'm having a little trouble with the 5 inch or 4 inch difference on the clutch

@SUPSGARAGE 3 ай бұрын

Thanks brother and are you asking for the part number for the AC compressor?

@jacoblowe5424 5 ай бұрын

Part 2 por favor

@SUPSGARAGE 5 ай бұрын

kzfaq.info/get/bejne/r8qPpMJ3mM-5fo0.htmlsi=KvOwlg11gcZUM6wa

@731u.s.a5 8 ай бұрын

When it comes to neutral safety wiring did you just plug in the original neutral safety wiring and that was it?

@SUPSGARAGE 8 ай бұрын

yep it will plug right in the 4L60E

@731u.s.a5 8 ай бұрын

@@SUPSGARAGE I heard some guys say that you have to splice the Ls and factory range plugs together to control engine rpm when going into gear. Did you have any issues like that?

@SUPSGARAGE 8 ай бұрын

no I didn't have to do that only thing I did spliced down there was the orginal speed sensor wires to the LS harness

@731u.s.a5 8 ай бұрын

@@SUPSGARAGE what about the two plugs that are on passenger side of trans? I believe one is the lockup switch white 4 prong and black two prong. Just cut those out?

@SUPSGARAGE 8 ай бұрын

@@731u.s.a5 you mean the orginal ones to the truck right?

@shodawg7580 10 ай бұрын

Where did you run your wiring harness

@SUPSGARAGE 10 ай бұрын

this harness is suppose to run through the passenger side but i didn't wanna run it that way so i just had it come back to the driver side and left it there so none of it is going inside the truck

@shodawg7580 10 ай бұрын

Thanks for that

@emtfire20 6 ай бұрын

Confused on your parts list which fuel lines and which transmission lines did you use ?

@SUPSGARAGE 6 ай бұрын

I used this one for the fuel lines EVIL ENERGY 6AN 3/8" PTFE LS Swap EFI Fuel Line Fitting Kit, E85 Nylon Braided Fuel Hose 25FT a.co/d/bo7N05w and this one for the transmission brother Limited-time deal: 3/8 6AN 12FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 6PCS Swivel Fuel Hose Fitting Adapter Kit - Black a.co/d/a77IoLt

@emtfire20 6 ай бұрын

Sweet thanks man your videos definitely help. What about off the fuel sending unit did you replace the rubber hoses with these or leave them ?

@SUPSGARAGE 6 ай бұрын

@emtfire20 Glad they help you brother and I only replaced the fuel lines from the intake to the fuel filter. You can replace them to the sending unit with the same lines but I didn't see it was necessary

@emtfire20 6 ай бұрын

One more question I’m running an aftermarket intake with 102mm throttle. Do I need a fuel pressure regulator? And do you know how the fuel rail is ran

@SUPSGARAGE 6 ай бұрын

@emtfire20 I can't say brother cuz I never done that

@decofiestaguasare2215 3 ай бұрын

Que manguera usaste 6an o 8an

@SUPSGARAGE 3 ай бұрын

6an Hermano

@chillletmeslide3840 8 ай бұрын

I’m confused about how u did the electric fans

@SUPSGARAGE 8 ай бұрын

I didn't really put much info on that brother u have Instagram? message me on there sups_garage

@ivanguerrero7481 10 ай бұрын

How did u do the ac bro

@SUPSGARAGE 10 ай бұрын

you mean like what ac lines did I use?

@curtischevarie3007 7 ай бұрын

hey what rad did you end up using ? is there a link for it ?

@SUPSGARAGE 7 ай бұрын

I used this radiator but had to upgrade the fans because they did not pull enough air Here is the radiator OzCoolingParts 3 Row Core Aluminum CC716AA Radiator + 2 x 12" Fans w/Shroud + Thermostat Kit for 1973-1991 84 85 Chevy C/K/P/R Series C10/C20/C30/K10/K20/K30 Pickup Trucks Blazer Jimmy Suburban a.co/d/dW8I8ut And here is the upgraded fans American Volt Dual 12-13 Inch Upgraded 180 Watt Motors 12 Volt Electric Radiator Cooling Fans Reversible Air Flow Highest Performance 5528 CFM a.co/d/3VQQVKr

@curtischevarie3007 7 ай бұрын

hey man thanks a million @@SUPSGARAGE

@greggalindo6714 15 күн бұрын

My fuel gauge goes past the full line when full and goes to 1/4 tank when empty. Have you ever seen this issue before?

@SUPSGARAGE 15 күн бұрын

@greggalindo6714 if you messed with the fuel pump it's possible you bent the floater brother

@jorgegudino9153 10 ай бұрын

U have the link for the radiator and fan ?

@SUPSGARAGE 10 ай бұрын

yes I do brother but I recommend upgrading the fans I have now(the link is also below) cuz the ones it came with does not pull enough air here in Texas lol OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share

@jorgegudino9153 10 ай бұрын

Can u use the stock radiator ?

@SUPSGARAGE 10 ай бұрын

@@jorgegudino9153 I don't see why you couldn't so I'm sure u can

@laobs6390 10 ай бұрын

@SUPSGARAGE would it be similar to a 93 obs?

@SUPSGARAGE 10 ай бұрын

yes similar but u might have to find out where ur wires on ur truck are will not be hard and ur shift cable might be different

@sergiocisneros9929 11 күн бұрын

What is the part number for radiator

@SUPSGARAGE 11 күн бұрын

Here you go brother this is the radiator I used OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share But I ending up having to upgrade the fans to these because the ones it came with were not strong enough American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share

@gainz_9126 8 ай бұрын

Should have pull the bed to get to the fuel pump.

@erickmartinez4406 4 ай бұрын

What relay did you use for the fuel pump?

@SUPSGARAGE 4 ай бұрын

the orginal one is still be used brother I just had to give power from a different wire due to the orginal computer not knowing when the engine is running

@erickmartinez4406 4 ай бұрын

@@SUPSGARAGE thanks for the fast response bro. Your videos have been very helpful 🙏

@erickmartinez4406 3 ай бұрын

Hey boss so did you tap and connect both wires together? The pink wire and green (23:09). Can I just use a t tap?

@SUPSGARAGE 3 ай бұрын

@erickmartinez4406 I just added a wire to connect both pink and green wire brother and yes u can use a t tap as long as you just make those 2 wires connect hope this helps 🙂👍

@SUPSGARAGE 3 ай бұрын

@erickmartinez4406 I do my best to respond to all of yall 😊👍 message me on Instagram if you need to brother sups_garage

@user-do3mc4fr4s 5 ай бұрын

Where did you connect Speedo ?

@SUPSGARAGE 5 ай бұрын

you just need to Intergrate the two wires from the LS speed sensor harness to the obs one brother n it will work

@user-do3mc4fr4s 5 ай бұрын

You have video?

@SUPSGARAGE 5 ай бұрын

@user-do3mc4fr4s yes brother it's part 2 of my ls swap videos just look on my channel

@redd2554 5 ай бұрын

Wats the part number for the belt

@SUPSGARAGE 5 ай бұрын

Here you go brother Part # 1105K6 I got it from Auto Zone

@redd2554 5 ай бұрын

Thanks

@redd2554 5 ай бұрын

@@SUPSGARAGE one more thing part number for ac bracket

@SUPSGARAGE 5 ай бұрын

@redd2554 Here you go brother ICT Billet LS Truck R4 A/C Air Conditioner Compressor Bracket Kit SUV LSX AC (LS3 Camaro) LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Designed & Manufactured in the USA 551585X-3 a.co/d/fEDGHOi

@crazyGamer-zt3yi 9 ай бұрын

Hey Siri excuse me I just wanted to ask you what kind of engine is it?

@SUPSGARAGE 9 ай бұрын

it's a 5.3 LM7 from a 2003 Tahoe

@darey1231 7 ай бұрын

What radiator did you use for this?

@SUPSGARAGE 7 ай бұрын

This one here brother but didn't post it cause i ended up having to upgrade the fans cuz they were not strong enough but the radiator works great. OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share

@darey1231 7 ай бұрын

Can I used my stock obs radiator?

@SUPSGARAGE 7 ай бұрын

@@darey1231 I heard that you can

@darey1231 7 ай бұрын

So what you did for your radiator I would have to do the same for my stock? As far as changing out transmission lines

@lorenzoramirez7894 18 күн бұрын

What radiator you use?

@SUPSGARAGE 18 күн бұрын

this one here brother but I had to upgrade the fans to the link below the radiator link OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch Upgraded 180 Watt Motors 12 Volt Electric Radiator Cooling Fans Reversible Air Flow Highest Performance 5528 CFM a.co/d/07Bm2NH1

@lorenzoramirez7894 18 күн бұрын

@@SUPSGARAGE thank you 👍🏽👍🏽👍🏽

@MTZ.G 10 ай бұрын

how much was your ls engine ? If you don’t mind

@SUPSGARAGE 10 ай бұрын

Engine and Trans I got for $1,300 but u can find them for alot cheaper mine came with computer already with vats deleted and the guy was able to show it running before he unloaded it from the back of his truck so to me $1,300 was not bad for no risk to take on the engine 😊👍

@MOE13576 10 ай бұрын

@@SUPSGARAGEhow many miles did it had ? And did you change any gaskets/seals ?

@SUPSGARAGE 10 ай бұрын

I was told it had 120,000 miles brother and I replaced every single gasket on the engine lol just to play it safe

@MOE13576 10 ай бұрын

@@SUPSGARAGE yup, better safe than sorry. Hahaha. I'm also in the dfw area. And the ones I'm finding are above 170 miles. I'm not sure if I should pull the trigger and just get one of those and replace all the gaskets.

@SUPSGARAGE 10 ай бұрын

@@MOE13576 I hear brother I was lucky enough to see mine running before buying that's the main reason I pulled the trigger lol

@Kadeo06 8 ай бұрын

How much was the swap?

@SUPSGARAGE 8 ай бұрын

If you mean just for the engine and transmission brother. It was $1300

@mikunikumeww9630 8 ай бұрын

Where you got the cold air intake?

@SUPSGARAGE 8 ай бұрын

I didn't put in the description because it was a little over price brother but here you go 😊👍 LS Swap Cold Air Intake - Black... www.amazon.com/dp/B0842BMTZ5?ref=ppx_pop_mob_ap_share

@mikunikumeww9630 8 ай бұрын

@@SUPSGARAGE thanks

@mikunikumeww9630 8 ай бұрын

@SUPSGARAGE what do you do with the TV cable on the 1994 chevy that is mounted on the firewall next to the brake booster on the top right that cable ?

@SUPSGARAGE 8 ай бұрын

@mikunikumeww9630 I have a 95 n it would be the cruise control for mine is that what ur talking about?

@mikunikumeww9630 8 ай бұрын

@SUPSGARAGE yes the curse control

@crisperez592 2 ай бұрын

How much did you end up spending once it was all done? If you don’t mind me asking

@SUPSGARAGE 2 ай бұрын

around 4k to 5k brother but u don't have to do it how I did u should be able to make around 2k to 3k just depends what all ur wanting to do

@crisperez592 Ай бұрын

@@SUPSGARAGE thank you I appreciate you responding back to my question. I want to do something very similar .

@polarbear1034 Күн бұрын

What brand radiator and fans did you use?

@SUPSGARAGE Күн бұрын

yes I do brother but I recommend upgrading the fans I have now (the link is also below) because the ones it came with does not pull enough air here in Texas lol OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share

@polarbear1034 Күн бұрын

Thanks bro! In the process of getting everything together to do my first LS swap on my 95 1500, your videos are a huge help! I’m putting a 6.0 in mine potentially with a supercharger if I can sneak it past the wife lol

@SUPSGARAGE Күн бұрын

@polarbear1034 lol I hear you on that! been wanting to put one too! hit me up on instagram if you got any questions along the way 🙂👍 sups_garage