Those scales are amazing. Cant wait to see all the color choices, and probably going to pick a few up

Spyderco are my favorite knived

Man if I had that many Spdyrcos at one time they would be picking me up from the floor! Those are amazing!

I miss the days when Spyderco took risks and managed to still be decent value for money. The golden age for the company was 2009 - 2012ish.

I like the scales! Well done

Just put my first CME on my first Shaman. Took it from “probably going to sell” to “maybe my favorite”.

The Tenacious is a pass with 8cr13mov. Spyderco should have produced the new Tenacious in S30V. I do love the scales and new color!

Spyderco better start listening to their customers again instead of trying to squeeze every penny out of them. They are going to end up in the same boat as Benchmade if they don't.

You REALLY need to restock some of your manix 2 stuff. Can't buy it if it isn't there lol

Thank you sooo much!!!

Love the scales on your Manix 2 knife!

Love the hex pattern scales man!

Great video & amazing scales, thanks for sharing!

Wow those are some sharp knives. Thx for sharing the new drops

Nice scales on your manix!

The spy27 blue g10 looks almost identical to the blurple s110v.

Awesome scales!!!

The richlite scales are awesome the only thing that would make them better would be if they were deep red/burgundy to match what-im-assuming is a St Nicks knives colorway

I am customizing my Manix 2 XL Cruware now. Already added your Ball Cage Spring and Ceramic Ball. Deciding on scales now. AWT mat be my choice, but some great options out their. It was absolutely sharp AF.

Scales look fantastic.

That first tenacious looks like the ano you did on my tenacious before you did the awesome laser etching..and then of course we lasered the phrases on both sides of the blade. I still love that knife! Thanks brotha. Great content Justin, keep it coming good sir.

Those scales look very nice. The hex pattern is nice. I enjoy your Spyderco unpacking videos. Thanks

My M4 Manix 2 was scary sharp!

A Delica in K390 is the sharpest out of the box i have ever experienced. Still is wicked after so much use i have put it through. A bit toothy, though.

Sweet scales. You got them for the Shaman?

I swapped the ball cage out of my crucarta Manix 2 for a Flytanium Ti one, and the blade went perfectly center once I reassembled it. IDK why or how, but I'm not going to argue with it. It also came slightly off center from factory favoring the clip side.

Love the Richlite scales on your Manix!

Love the scales

Got my first CME in yesterday for my yojumbo. Cannot wait to install. My gf loved the stickers and starburst btw.

Those scales thoooooo!!!!! You’re getting better and better with each project which is no shocker to me! Side note a Brotha needs a work Mat so let’s talk my man!!😂

I love the Manix2 Xl a 45,25 and 30 is crazy for a factory edge.

Love the look of the scales I have a lw Manix 2 they would look good on.

I put titanium scales and backspacer on my M4 Mint green Endura. I really hated the mint green. Now, it looks killer !

I liked the look of new scales you made, but clearly, they messed up the knife, causing it to not cut the packaging in a straight line! So, no thanks! Unless you could make them in blue, that would fix the issue! Just kidding. I am in a desperate need of replacement scales for my Manix 2 LW SPY27. Hopefully in blue, to match the original.

My pm2 wharncliffe whittled hair out of the box

I dig those scales! When can I get some?

The new scales on that 4v Manix 2 have a very similar pattern as aftermarket Cerebus G10 scales I got for my PM2 DLC coated XHP Wharncliffe blade from Cutlery Shoppe around fall/winter 2023. Except they're orange to match the Cutlery Shoppe exclusive color scheme. I got the Cerebus honeycomb pattern scales because they have a chamfered edge on the scales instead of the hard edge of the stock scales. even the later version of a Para 3 in S45vn has slightly more rounded edges on the G10 scales compared to the scales I've seen on PM2 knives. Was that the Manix 2 lightweight from St. Nicks knives that you put the handsome hex pattern scales on? they're the one place I know that likes to get their exclusives from Spyderco in CPM 4v steel. I remember that the 4v manix 2 LW from St. Nicks Knives sold out in just hours. Since I have a Rex 45 stormtrooper Manix2 LW that works so well already, I have not used the St. Nicks I was lucky enough to snag by sneaking away to order when they dropped while at work.

I like those scales, especially for user knife.

Scales look great. Jumping?, rounded corners be nice

Yeah new video! Greetings to molly and you!

That manix is a legit lightsaber 😎🔪

All great knives!

Those scales are fire!!

Super sharp spydies!

Very cool I'm just Manix XL is the Greatest

Manix 2XL is awesome

6:32 ❤ Don't understand why Spyderco went with 8cr and titanium! That's just ridiculous. I rather have a better blade steel than handle material.

Hot dam and tbh idc Im a Spyderco fanatic

LUV THE HONEYCOMB SCALES!

Those scales tho 😮😮

Nice! Yea I like those scales! When will slickem all be available? I love cruwear!

Nice review! Thanks. I’m curious about the sharpness tester you use if you could share that. Again, excellent job on some great knives. Appreciated.

Man I want 7 spyderco boxes to show up!

love the scales. How can I get a hold of some for my Manix ?

I jus bought the manix 2 Lightweight and I can barely slide the lock up close the knife. Is there something I can do about it?

Crazy sharp. But it's différent each time you did it ..! Even that, there is no dout they are all very sharp, and beautiful !! ^^

I love the scales

lots of nice spydies- i like the tenacious but I wish that one came out of Colorado

Love the hexicon scales man for the manix 2. Do you sell them new? Live in Europe

Love them scales

What do you do with all the knives that get sent to you?

These look great. I don't know if Spyderco grades knives of the same model, giving retailers a deal on knives that aren't the best from the production line. I bought a Crucarta Para 3, and the micarta was just awful. Looked nothing like the two you showed here. The texture was sanded down as if they were trying to grind out imperfections on the scales.

Very cool. Really wish they would choose a different steel for the ti handle tenacious

Maaan I wish spyderco would send me a package like that

Double 45s on the dime0

Had the Cru-carta Manix 2 for a couple weeks now. Loving it even though the scales are mismatched ( one side is chocolate brown and the other is reddish with a larger weave ). Can you tell me what the numbers next to the logo on your blades mean..?

Banging scales

Whats up with the extra numbers on the blade near the logo?

It a Nice 50 bucks deal

They need to mate the ti and m4 tenacious

Please make these for sale, I want!

New scales look SICK AF!!!

I love spyderco… but their designs are tired and they don’t do anything exciting anymore plus I can buy an s90v and full ti frame lock for the same price as a g10 and s30? So I collect old spydercos but I’m not interested in the new ones accept the paysan it’s the only model I want made in the last several years

They all look the same are they ever going to get away with the leaf shaped blade

off the ripp? like you farted? 💨

The coated blades look like absolute trash to me. They remind of the old Teflon coated pans from the 90s XD😅

It’s just unfortunate that all these beautiful knives are outsourced and manufactured in CHINA!!!!! Idc what materials or how nice it is I’m not giving China any more of my money than I’m already forced to

Very knice unboxing of some ultra sharp Spydies...as for your new scales for the Manix 2 LW, I dig 'em. However, some of us with a hand size in between bear paws like yours and little bitch hands might prefer the size and shape of the skinny scales as offered by AWT. The hexagon milling on yours is okay but not in love with it. For me, I would prefer maybe dragon scale milling or a diamond plate texturing. Or possibly some sort of radial/wavy/starburst sort of pattern. I'm sure you could think of and produce many different finishes, colors and materials. As they say, the sky's the limit.

"Tenashy???" Cringy corny!!! Are you the same guy that 'tried' to give Michael Jordan other nicknames? And wound up doing this?