I used kzfaq.infoUgkx4ynqaujg7rZKFapA8s29kTpRszJGa3-K this for the first time today to replace the front wheel bearing on my rwd 98 dodge dakota. This had absolutely no issue removing or reinstalling the lug nuts and it took off the axle nut without any struggle. Sounds like it's got some muscle to it. Time will tell
@SLIDEWAYSLIDEWAY3 жыл бұрын
The IR was something I was going with 5 years ago but the milwaukee M12 ratchet was something I was more interested in and I'm happy with my choice of milwaukee. The M12 with the M18 allows so much versatility with a large selection of tools.
@MarkSWest3 жыл бұрын
Love that ring light too on the IR, but when it comes down to the meat and potatoes gonna have to go with the ball-busting Milwaukee!!
@JimmyMakingitwork3 жыл бұрын
It’s often easier for the manufacturer trying to beat the first or most popular brand, since they have a set target to beat. I wouldn’t be surprised if IR releases an improved tool shortly. Both are really great tools, i’d go more by which batteries I already have around really. Or maybe who has a sale.
@Shoptoolreviews3 жыл бұрын
We would love to see IR release something new again, but I'm not sure that will happen. They seem to have let their cordless lineup just sit idle. Thanks for watching.
@actionjksn3 жыл бұрын
I'm in construction now but back in the 1980s I was a tire man. The best impact you could use back then was in Ingersoll Rand. But these were air tools obviously. They better get it together because they can't ride on their name in this market. There's too many good cordless drivers.
@Shoptoolreviews3 жыл бұрын
Yes, IR had the industry wrapped for decades, but the cordless market is taking away the pneumatic market. IR cordless tools were great, but they haven't done anything new in years. Thanks for watching.
@vickenkaragozian20413 жыл бұрын
Milwaukee still the best. A lot of options and great power.
@Shoptoolreviews3 жыл бұрын
Great point! Thanks for watching.
@jaywelker55663 жыл бұрын
2nd best after Makita's. (in this class as well as compact) IR has high torque. And Milwaukee has 1" and subcompact, at least until Dewalt's new 12V wrench is out, assuming it delivers on their claims.
@6.4DieselDoctor3 жыл бұрын
Appreciate the review. Ingersoll was first on with the high and mid torque impacts along with the 90 degree impact. Then everyone else followed and as much as I hate to admit it Milwaukee took their ideas and made more power. Not bad at all.
@BlindMansRevenge20023 жыл бұрын
Oh right! My man! Finally we get Ingersoll rand into the game. Keep them coming because there are way more cordless Ingersoll rand tools than just that
@weduhpeople85043 жыл бұрын
Milwaukee ftw! Glad I have that one but in the 1/2” anvil. I am invested in the M18 platform. Thanks for validating my purchase!
@Shoptoolreviews3 жыл бұрын
Right on! Glad we could help. Thanks for watching.
@jaywelker55663 жыл бұрын
still the #2 behind the newest kid on the block, from Japan. ;)
@Jarco1013 жыл бұрын
I always wanted an Ingersoll Rand power impact, even a pneumatic one. Sadly they never go on sale.. As always excellent video
@adamferoli3 жыл бұрын
I've owned Milwaukee and I currently own the Ingersoll Rand 3/8 impact. From personal experience I would say the Ingersoll Rand seems like a better build. The battery is not loose on the tool and it just feels very well constructed.
@spf-92.53 жыл бұрын
Loose battery usually not bad . Ive dealt with tight ones and you have to bang them or file and lube ( it can be a bitch). Sometimes loose is better and still gets the job done if you know what i mean.
@wecx23753 жыл бұрын
@@spf-92.5 I use M18 Fuel tools including this impact in the video. All Milwaukee m18 tools have batteries that are tight and a little difficult to remove.
@errrky3 жыл бұрын
Thanks Tim for all the reviews - can't wait to see what you got comin' from the FLEX line!
@Thebassguru843 жыл бұрын
IR impacts are awesome! I have the 1/2 and boy nothing can touch it
@chrispy3982 жыл бұрын
Man it seems like everyone talks about Milwaukee but they have no clue about the ir lol
@Burnz0matic3 жыл бұрын
i like that light on the ingersoll.
@chrisgeoss25432 жыл бұрын
Thanks for this review. I'm not someone who sticks to the same platform I feel as though evey brand has their shining star... Milwaukee seems to have a galaxy of stars that I need!!!!!!
@ad6360513 жыл бұрын
Me personally, I would rather have a 1/2 inch anvil on the Milwaukee than a 3/8 inch because I feel the Milwaukee impact wrench is putting too much power on that tiny anvil, it's anyone's guess how long that will hold up. Great video though.
@TranTek2 жыл бұрын
Try to use High Output XC 6.0 (21700) battery you will take it to another level
@mikedrabick85453 жыл бұрын
Ingersoll rand doesn't need to make another one for this reason you don't need anymore power out of a 3/8 that's what the 7152 is for...
@BlindMansRevenge20023 жыл бұрын
You hit the nail right on the head brother! I own the W 5132 and the original W 7150. There would be no way that I would reach for my 5132 to crack something loose that has been tighten down to 400 foot pounds and above. If I know that I’m going to need to break out the judge that’s when the 5 Amp battery goes on the 7150. The 7150 has never let me down
@chingizkavtarov5579 Жыл бұрын
Appreciate the review. Milwaukee still the best, my favorite tools.
@marcophilhom68443 жыл бұрын
6 year old gun vs new one. both are bad ass guns
@Shoptoolreviews3 жыл бұрын
We wish that IR would release something new again.Thanks for watching.
@marcophilhom68443 жыл бұрын
Only thing I heard from IR they are coming with battery power 3/4 gun
@BlindMansRevenge20023 жыл бұрын
They don’t need to! IR made the necessary revisions to the most popular selling impacts which can be exemplified in the W 7152, W 5133, and the W5153. Sometime during the last decade a nut busting torque war started which I are decided that it was not even going to try to win. The cordless tools that they put out can get any job done. It is just a matter of using the right tool for the job. For example, that 33 mm socket of yours is axle nut Territory and when I take out axle nuts I’m not reaching for a mid torque impact, for that type of job I reach for my Ingersoll rand W 7150 high torque impact wrench which, has not lost a match against an axle nut in the seven years that I’ve owned it fantastic content though! Keep them coming and let’s see some more IR
@jacob041033 жыл бұрын
I have the newest version of the ingersoll rand andI have had it for a year. I work on cars with it and I was impressed with it at first, but now it just seems to bulkly and heavy for the output for a tool that you have to grab all day. I do tons of brakes on cars and small trucks. Also the grip is starting to swell already. I'm thinking of just going to all milwaukee. I have some m12s at home that I use and I'm super impressed with them.
@JB-4233 жыл бұрын
i recently got the compact 1/2 inch milwaukee m18. thing is amazing. had rusted on tundra caliper bolts. even though i had to use a swivel socket, m18 ran that off very quickly. highly recommend. or even the mid torque since it's still pretty compact compare to snappy 3/8 or 1/2 inch impact
@marcophilhom68443 жыл бұрын
Two of the best guns on the market
@Shoptoolreviews3 жыл бұрын
They're definitely top-tier runners for sure. Thanks for watching.
@GmailUnited3 жыл бұрын
milwaukee needs that ring light on the IR
@Shoptoolreviews3 жыл бұрын
YES!! We've been saying that for years. Thanks for watching.
@chris264963 жыл бұрын
Nice one Tim. Good comparison on that mate.
@jasonhull21632 жыл бұрын
There's a new Ingersoll Rand lineup coming soon and they are sure it will win over others as they say.
@OUTILSCLIPSQC2 жыл бұрын
Milwaukee beast ! Have the stubby 1/2 and i am impress every single time haha
@jonathangarzon27983 жыл бұрын
Everyone purely going off the highest torque completely unaware of how to choose tools. The IR is the better impact of the two for features, they just need more go go
@bpeterfeso3 жыл бұрын
These tools are great but they are for small work like brakes, calipers, and lug nuts on cars but personally if you want to be fast just get Milwaukee's high torque or a half inch air ingersoll rand
@ZeGermanHam3 жыл бұрын
The half-inch version of the Milwaukee Gen-2 mid-torque impact (model 2962) has 650ft-lbs breakaway. I haven't been able to find a fastener on a passenger car that it couldn't remove. Suspension, crank bolts, you name it. The high-torque impacts have their place, but are hardly ever needed in day to day practice now that the mid-torques have gotten so powerful.
@bpeterfeso3 жыл бұрын
I live in Minnesota and the mid torque is not powerful enough for the lugs because of rust
@Gshock7143 жыл бұрын
I removed the Honda crank pulley bolt with the Milwaukee mid torque 3/8 using the Lisle 19mm socket wit adapter..axle nuts are also a piece of cake with the Milwaukee mid torque
@ZeGermanHam3 жыл бұрын
@@Gshock714 Yep, the Milwaukee mid-torque doesn't even break a sweat with that stuff. They're great.
@Doctor_883 жыл бұрын
For car service IR is way to go...I have w7152 and it is beast and i plan buy mid torqe to..This tool is 6years when is came out and it is respect for IR..
@jacob041033 жыл бұрын
Ive been using the mid torque for just one years work toyota flat rate. I grab my air tools more often because the weight of the ingersoll is to much for the power output. Also, the grip is already swelling. That 6 ounce and extra power the Milwaukee has is where it at I think.
@Gshock7143 жыл бұрын
That Flex impact driver holds up real well to both of these impact wrenches at a fraction of the price impressive.
@bigredracer78483 жыл бұрын
119👍's up thanks again for taking us all along with you
@Shoptoolreviews3 жыл бұрын
Excellent, thanks for watching.
@bigredracer78483 жыл бұрын
@@Shoptoolreviews thanks again for the work you do for us all
@dannysautorepair Жыл бұрын
I'm going with Milwaukee.
@zacharychristian97623 жыл бұрын
Who else was like who cares about those two the torq digital impact he used is the one I want
@Shoptoolreviews3 жыл бұрын
That's the HYTORC Lion torque guns. They're awesome, but they're pretty expensive. I'll post the video review of them below. Thanks for watching. kzfaq.info/get/bejne/r6d8ec5735bNg6c.html
@gjn712 жыл бұрын
yeah all good and well Milwaukee is stronger where I was working we had to sister trucks the same I had my own IR the other truck had the company's own how many times i seen wheel studs on the the steer bent from over tightening and snap off I never had that problem once
@tommater27243 жыл бұрын
Love my IR mid things great and the body feels great and it’s a softer plastic, I’d buy that over any Milwaukee’s gen anything. And then my Mac/ dewalt mid
@Dave-dh7rt Жыл бұрын
Why? Look at makita man, their new compact XWT14Z can put up 330ft/lbs fastening in 10 seconds, the GWT04Z compact can do 350ft/lbs. the 40V mid torque makita can do 550ft/lbs in tightening and they are well built tools.
@Burnz0matic3 жыл бұрын
comments are still about flex hating, your videos seem to be nothing but actual facts and flex looks like a great tool.................. I still just bought a Milwaukee set but i won't hate on flex.
@Toolsinaction3 жыл бұрын
Good comparison
@Shoptoolreviews3 жыл бұрын
You're just trying to be nice. lol.
@Undisputed_KingАй бұрын
What about the W7152?
@lego126822 жыл бұрын
I've got the 7152 ½, all my co workers are part of the red army. If I had it to do over again, I'd buy IR 100's over.
@flat6targa3 жыл бұрын
On the Milwaukee are you able to shut the light off? Like if you were working with a partner who was under the vehicle you would shut it off to not blind them.
@vickenkaragozian20413 жыл бұрын
Why don’t u do comparison the dewalt 400 ft.lb 3/8 drive versus the milwaukee , not sure which milwaukee but the one close to dewalt? Thanks Tim. 👍
@nixaeagle1413 жыл бұрын
Both Way more than a 3/8 needs . Prefer the IR build & light .
@Shoptoolreviews3 жыл бұрын
You are correct, way beyond the needs of a 3/8" anvil. The IR light is 2nd to none. Thanks for watching.
@naikotechnic73153 жыл бұрын
please do a review with ir 7152 1/2 "and milwaukee m18 fuel 2767-20 1/2" high torque impact wrench, let's see who is the king :)
@juanc51493 жыл бұрын
7152 stomps.
@naikotechnic73153 жыл бұрын
@@juanc5149 I did not understand you well .... please say again.
@AlexMaysonet3 жыл бұрын
In my experience, both of them will take off whatever they’re put up against but the Milwaukee takes it off quicker. That’s the only difference I’ve seen with them. They’re both awesome power tools and it really comes down to your preference and what tool platform you already have.
@naikotechnic73153 жыл бұрын
@@AlexMaysonet Are you sure that Ingersol is not more powerful and exactly the 7152 model?
@AlexMaysonet3 жыл бұрын
@@naikotechnic7315 I mean, on paper it produces 100 more lb-ft of torque than the Milwaukee and yes, it is the W7152 model.
@wethenorth43783 жыл бұрын
i bouaght the ingersoll only because pibuild qua;ity i have had ingersoll rand cordless before and never needed the warrenty
@BurgaBea_Stro Жыл бұрын
The IR 1/2 is the best on the market
@ivantieu67642 жыл бұрын
I’m exposed to both brand of tools. I find when I use Milwaukie it’s unbalanced and doesn’t feel natural. Milwaukie always feels cheap and nasty compared to say a makita or ir tool.
@doc5593 жыл бұрын
🏆🏆🏆👍🇺🇲🙏 Thank you for sharing
@Uninfluenceable3 жыл бұрын
I personally went with the Ingersoll because all the others look like kids' supersoakers. I'm contempt with the torque output of the IR, if I need a higher output I also have the W7152 1/2" drive that pretty much takes off everything. I do admit that Milwaukee has a more complete lineup of cordless tools, but IR makes all the ones for my particular needs. Also IR has the small W1130, which is my favorite of them all, superlight and powerful enough for most engine fasteners, got the big boys for the suspension stuff.
@BSed313 жыл бұрын
I've got the 2960 and it's my first impact. Have had it for a few months now and have used it a handful of times doing mostly lug nuts. Seems to work perfectly, but I've not much to compare it to. Can anyone tell me if it's normal for the anvil to have some front to back play? Side to side it's pretty secure, but front to back the anvil sometimes comes out of the housing 2-3mm. Just want to make sure this is normal.
@Dave-dh7rt Жыл бұрын
Seems like you need a 300ft/lb torque wrench! 😂😂
@danvesa11823 жыл бұрын
Surprised flex let you talk about another brand!
@Shoptoolreviews3 жыл бұрын
There are no manufacturers or tool brands that tell us what to say. You only get the truth from us...and a few mistakes here and there, but we'll own up to those too. Thanks for watching.
@justinshannon-wangler62292 жыл бұрын
Advance auto has the 1/2 drives
@Anubis782502 жыл бұрын
I honestly see no use for these. If I need more than a hundred pounds I'm grabbing my half inch drive w7150. Otherwise I use a 3/8 ratchet driver. If you can't get a socket in 3/8 for the hardware that takes that torque, then why would you need that torque in a 3/8 drive? The IR is just better build quality and durability. They don't need to keep coming out with 'the latest thing', they're built to work and last. My 7150 has got to be close to ten years old now and it still runs like new, with the original batteries it came with.
@linkstale3 жыл бұрын
if you test the milwaukee battery its 20v. Project farm did a test on the top 3 brands batteries
@Shoptoolreviews3 жыл бұрын
All 18V batteries when fully charged will read 20V. There’s no voltage difference between “18V” and “20V” batteries. Same number of cells in series to create 18V. When charged all the way up, they read 20V, once they’re used a little, they read 18 nominal volts. Thanks for watching
@slylockfox853 жыл бұрын
What the original poster said. "20V" is just a marketing gimmick.
@loucifer3233 жыл бұрын
@@slylockfox85 i guess 12v is a marketing gimmick because under load its 10.3v
@linkstale3 жыл бұрын
@@Shoptoolreviews yessir
@slylockfox853 жыл бұрын
@@loucifer323 The voltage referenced above is a "no load" voltage. That's why it's considered a gimmick. Go look it up. Power tool companies sued each other for false advertising in the past because of these "20v" claims.
@binagarten4667 Жыл бұрын
Milwaukee all day long. I.R customer service to the English is pants!
@funurayt0502 жыл бұрын
What is the tool your using to set the ftlb .??
@Shoptoolreviews2 жыл бұрын
HYTORC Lion Torque Setter. It's very accurate.
@BigInjun053 жыл бұрын
Do you have the 1/2 inchers tested?
@ballersixty93 жыл бұрын
the milwaukee light looks 5x brighter than the IR.
@BlindMansRevenge20023 жыл бұрын
The LED light ring could’ve been dirty on the Ingersoll rand or it was not on its brightest setting. The task light feature of that tool can be adjusted to a low med and maximum brightness setting. You throw the forward reverse switch into neutral and press the trigger and it will adjust the brightness settings.
@bryanfuentez76403 жыл бұрын
Send the IR to the torque test channel
@Shoptoolreviews3 жыл бұрын
Why? We just torque tested it.
@enano31022 жыл бұрын
hello I would like if you could try these models Hilti SIW 9-A22-Volt and 3/4 in ... Hilti SIW T-A-22-Volt 1/2 in ... Hilti SIW 6AT-22-Volt 1 / 2in. Thanks
@JuanHernandez-ov8wv3 жыл бұрын
Had t ingersoll rand 5132. t light n t offset was great but it craped out in less than 20 hrs of use. Since it was still under warranty they replaced it for me with t 5133. but i just dont trust t tool . I had t milwaukee 12v stubby. N it craped out to.bout a year ago. N thats why i had bought t IR tool. If u want something to last for a long time just get t makita tools they have never let me down. I just wish makita would make a mid torque 3/8 impact.
@Shoptoolreviews3 жыл бұрын
Thanks for sharing. That's great info. Can't blame you for trusting Makita, they make some great tools. Yes, we would love to see the XWT17 in a 3/8" as well. Thanks for watching.
@DoorDashDuo2 жыл бұрын
Both are over priced. I do own the m18 Milwaukee 3/8 and the battery wobbles new out of the box.had to shim it with duct tape. For $375 that is ridiculous! But it is very handy otherwise....
@ryanorr57553 жыл бұрын
Seems like u cant go wrong with either tool
@JB-4233 жыл бұрын
i love Milwaukee tools but i still am mad about them getting a patent on 18-20 volt batteries. like WTF. that's just a dick move on their part
@teenice8943 жыл бұрын
I just sold my IR20v series tools & switched to milwaukee because I felt IR wasn't keeping up with milwaukee
@Shoptoolreviews3 жыл бұрын
I do wish that IR would release more tools. They seem to sit on tools for extended amounts of time. Thanks for watching.
@serohaguju10543 жыл бұрын
Dude you have to figure out a different test saying over just isn’t enough
@brynnond.69523 жыл бұрын
Noticing a new wave of spam bots in the comment section which is weird.
@juan74ful Жыл бұрын
Thanks..for sure not buying Ingersoll Rand Impact…
@tommater27243 жыл бұрын
Dude what’s up with all you guys testing with a socket adapter get the right size socket for the drive impact your using also if you don’t need a deep socket you don’t use it use the depth socket that’s the shortest for the job . If your using a 3/4 drive socket your using the wrong tool for the job smh 🤦♂️
@Shoptoolreviews3 жыл бұрын
Did you even watch and listen to the video before you made your comment?! I would venture to say, that's a No. In the video, I explain in detail why we're using the socket and adapter that we are. Let me repeat myself for the 12-hundreth time. These are 3/8" drive impact wrenches. The amount of power they deliver requires fasteners that are at least 7/8" in diameter. This means the nuts are 33mm. You can NOT find a 3/8" drive 33mm socket. THEREFORE, we have to use an adapter. To mitigate any torque loss, we have welded the adapter to the socket. We are also using the same socket and adapter for both tools. This makes it perfectly fair. Also, you can tell by the length of the bolts that we require a deep socket. No shallow socket will fit this. Nonetheless, thanks for watching.
@tommater27243 жыл бұрын
@@Shoptoolreviews 33 mm then you would use a 1/2 gun like I said right tool for the job there’s a reason it’s hard to get a 3/8 33 mm don’t ya think??? But the videos are always nice to watch 👍
@Burnz0matic3 жыл бұрын
@@Shoptoolreviews 🤣 me after reading this.... great videos!