@garrietaylor9519 3 жыл бұрын
Power steering fan needs protective grill on it - engine mount is on it's way out judging by the viable bushing clearance to the mount
@adrianporter5580 2 ай бұрын
Why does it have JCW badge when its not a JCW?
@simonlloyd7557 3 жыл бұрын
forget using wd40as a penetrant. Instead make a 50/50 mix of acetone and hydraulic fluid (power steering fluid is fine). Put it in an oil can and have at it. if that doesnt release it, no other oil will and you'll have no option but to use heat and lots of swearing.
@NYChemicalRomance 3 жыл бұрын
Mine is leaking in the same place as yours. Did you ever discover where the leak was coming from?
@thatguy53 2 жыл бұрын
The leak is the rear main seal leak. OEM number 11 11 1 492 244. You have to separate the gearbox from the engine block to get access to it.
@sleepercell9926 3 жыл бұрын
Wish I could find where my mini is leaking oil from.
@thatguy53 2 жыл бұрын
The leak is the rear main seal leak. OEM number 11 11 1 492 244. You have to separate the gearbox from the engine block to get access to it.
@sleepercell9926 2 жыл бұрын
@@thatguy53 Thanks for that. I did the main seal when I did the clutch, it was actually not leaking all that much though. The majority was comming out of a torn hydraulic fluid line that went from the reservoir at the top to the motor at the bottom by the subframe.
Hope This DIY Helps
Рет қаралды 4,4 М.
Hoovies Garage
Рет қаралды 510 М.
Tuning Shed
Рет қаралды 11 М.