Old industrial lamp restoration

Рет қаралды 24,244

14 күн бұрын

I have restored this old table industrial lamp and made something new for it.
If you like my work please do not forget to share, subscribe (only less than two percent of you subscribed my channel) and leave a comment. It is very important to me.
Thank you for watching and good luck in everything you want to reach.

Пікірлер: 57

@krtekcyberpunker 11 күн бұрын

Elektrosvit, made in Czechoslovakia

@Mlenski_restorations 11 күн бұрын

🇨🇿👍🏻😎

@zoranpetrovski3051 8 күн бұрын

Awesome work 👏

@zake1571 6 күн бұрын

fantastic result...

@Mlenski_restorations 6 күн бұрын

Thank you.

@user-if6tx3iy1p 7 күн бұрын

Very good! I'm from Americana SP Brasil.

@Mlenski_restorations 7 күн бұрын

Thank you. Gretings to Americana. 👋🏻

@decoder6379 5 күн бұрын

У Вас просто золотые руки! Великолепно!

@Mlenski_restorations 5 күн бұрын

Большое спасибо! 🙂👋🏻

@gazellediver1674 10 күн бұрын

great work. and i really really really enjoyed that there was NO unneccessary music in the clip.

@Mlenski_restorations 10 күн бұрын

I am glad you enjoyed it. I prefer natural tool sounds.🙂 Thank you for comment.

@ianallen2 10 күн бұрын

I watched this video first and then I just watched the grease gun restoration. You have a new subscriber. .

@Mlenski_restorations 10 күн бұрын

Perfect 🙃👍🏻

@RonaldoSilva-tn8in 9 күн бұрын

Restaurada lâmpadas industriais 💡🔌😉

@gokhanarslan8219 10 күн бұрын

eline ,aklına saglık güzel iş çıkardın. sabır ve emek yüksek detaylara önem veriyorsun.

@Mlenski_restorations 10 күн бұрын

Thank you very much for your comment. 🫠👍🏻

@shawnataylor7998 9 күн бұрын

Very nice!

@nineteenandfortyone 10 күн бұрын

Good work!

@cing_canoe_carl9684 9 күн бұрын

extreme beautiful result!

@Mlenski_restorations 9 күн бұрын

Thank you.

@Rendraco79 10 күн бұрын

A nice restoration

@PZLRESTORATION 10 күн бұрын

Restauração sensacional meu amigo. Aprendo muito com você. Parabéns👏👏👏👍

@Mlenski_restorations 10 күн бұрын

Thank you very much my friend.🤜

@paulorth2251 10 күн бұрын

The base tray assembly is a very nice attachment for this lamp. Excellent workmanship. 😊

@Mlenski_restorations 10 күн бұрын

I am glad you like it. Thank you. :)

@nedimburakc4604 11 күн бұрын

Küçük ve basit bir masa lambasi ama,ne kadar ayrıntıli bir obje bu arada cok emek verdiniz,guzel ve kalite bir iş çıkardınız,imal edildigi fabrika görse bunu bizmi yapmışız diye şaşırdı,Mavi ve paslanmaz celikten mamul vida ve sıkılaştırma mandallari tam bir kontras olustu,zevkli nir adamsin,emegine ve ustaligina saglik.

@Mlenski_restorations 11 күн бұрын

Thank you very much for your comment. Nice to read it 🙂

@jeffreyandreas7514 11 күн бұрын

Very nice job, I think it turned out great!

@ianallen2 10 күн бұрын

A very nice lamp. Well worth restoring. I like making and restoring lamps too. But I make more from moped parts and other bits and pieces laying around.

@Mlenski_restorations 10 күн бұрын

I have made a lot with other parts. But video would be too long and those processes are still same. So I decided to do not use these shots. Be sure every lamp part were processed 😎

@jt9498 12 күн бұрын

Very nicely done. Turned out really good and useful now. :)

@Mlenski_restorations 12 күн бұрын

Thank you for comment.

@sumitsingh6869 11 күн бұрын

Excellent work ❤❤ lamp like new

@karmelek1ful 10 күн бұрын

Nie wiem z jakiego jesteś kraju ale generalnie do obudowy podpina się żyły żółto-zielone nie czarne . A puszczenie samych żył przez całą lampę grozi szybkim ich przetarciem i niebezpieczeństwem porażenia przez prąd elektryczny.

@Mlenski_restorations 10 күн бұрын

Yes, we use yellow-green ground wire too. But there was black one in three-link cable. I guess historically black wire were used too. But I am not sure about it. I added some more isolation to exponed places. Thank you for your comment.

@user-cs3el8xr9t 8 күн бұрын

Провода проложены так, как задумано производителем. При использовании ламп на станках быстрого износа изоляции не замечал. Кстати, такими же лампами, комплектовались кульманы.

@obuxov1982 11 күн бұрын

Хорошая работа 👍, чувствуется рука мастера🔥. Нашел видео посмотрел и решил подписаться.

@Mlenski_restorations 11 күн бұрын

Thank you (Спасибо) very much for watching and subscribe 🙂

@laghlaaziz4967 6 күн бұрын

👍👍❤❤

@Sweden-restoration 11 күн бұрын

Great work as always my friend! ❤

@Mlenski_restorations 11 күн бұрын

Nice to see you again my friend. The most wishes to You 💪 Thank you for watching and comment 👍🏻😎

@dariusjanulis4119 9 күн бұрын

I subscribed to you, I will wait for a new job👍👍👍

@Mlenski_restorations 9 күн бұрын

Thank you for your support. 👋

@user-lh5fr6nz5y 11 күн бұрын

Круто! Есть похожая на работе, установлена на токарных станках TOS trench моделей 17 и 32, на 17 копия как у вас, а на 32 модели тоже но еще со стеклом.

@Mlenski_restorations 11 күн бұрын

This is it 👍 Thank you for information.

@fix_old 11 күн бұрын

Wonderful restoration, my friend. It's like new😎😎

@Mlenski_restorations 11 күн бұрын

Thank you for your comment friend. Good luck to your next work. 👍🏻

@Alexey_Victorovich 9 күн бұрын

This is not a restoration. This is a renovation.

@rustyyazo 12 күн бұрын

Very nice lamp and nicely renovated, the wooden element fits well, was it like that originally?

@Mlenski_restorations 12 күн бұрын

Thank you friend for your comment. No, the wood stand is not originally. There was a clamp originally. But time is changed. So I have turned this industrial lamp to table one.

@rustyyazo 12 күн бұрын

@@Mlenski_restorations Good idea with that stand. Greetings

@Mlenski_restorations 12 күн бұрын

Thanks🙂

@rogerpatrongonzalez5800 11 күн бұрын

🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👍👍

@RedRustRestoration 10 күн бұрын

Felicitaciones amigo Mlenski, llegaste a los 1000 💪💪💪!!! te vengo siguiendo esperando que llegues!!! a partir de ahora la cosa se pone más interesante jajaja!!! Nuevamente te felicito, todo esfuerzo tiene su recompenza, solo hay que saber esperarla. Saludos de @RedRustRestoration

@Mlenski_restorations 10 күн бұрын

Hey Bro, I have nothing to say. Your comment took my breath. If I have an Angel I would send him to You. Best wishes to You and thank You for your comment. 🫡 Good luck to your next work 💪👍🏻

@RedRustRestoration 9 күн бұрын

@@Mlenski_restorations 💪👍