Old Rifle Restoration

Рет қаралды 7,355,782

3 жыл бұрын

This is a restoration of a rusty old gun.
This gun had a lot of missing parts, so I had to build some of them from scratch. I really love this gun after the restoration. Under no circumstances will anyone shoot with this gun. It is restored only to be hung on a wall for decoration purposes.
Thank you so much for Subscribe, Likes & Comments.

Пікірлер: 1 600

@bblevins 2 жыл бұрын

YUK! I don't know what you were thinking with the stock. You took all the character out of it.

@madmarcus1709 5 күн бұрын

He fixed it. Who cares if he paints it?

@sahmadi1000 2 жыл бұрын

Thank you for bringing that old gun alive. There are so many lessons in this one video. God Bliss.

@richardsheckler8293 3 ай бұрын

Considering that this rifle was restored in a country where personal firearm ownership is forbidden, the work is truly remarkable. While watching the begionning of this clip, my first thought was, "why begin with such a horrible choice?" Then I realized that the restorer is NOT living in the USA where guns are readily available for cheap. For those of us living in the US, we should consider ourselves fortuneate indeed. Very nice job you did on this old relic.

@ajm1268 27 күн бұрын

Do you believe in the second coming? if so what are you going to do when Jesus comes back and takes away your precious firearms?😊

@Rob-bn9ib 12 күн бұрын

@@ajm1268 Good thing he's not, I guess.

@richard594 Жыл бұрын

That stock was deteriorating rapidly, you did the only thing that could be done to save it. You did a fantastic job of restoration here and that rifle is once again a thing of beauty, thanks for sharing.

@ErminoPrado 2 ай бұрын

😮 BB🎉😢😮😮

@joemoore4027 3 жыл бұрын

Lord that stock would look good IN my fireplace !

@ramgyangautam7028 3 жыл бұрын

Hi purn

@John-4649 2 жыл бұрын

😂

@markphillips6154 2 жыл бұрын

Yep maybe take that Woodstock off and sand down a little and put a satin finish on it. That that Shine is bad news. Otherwise wow what do I know about it anyway

@HeadlessChickken 2 жыл бұрын

@lloydlamb4984 3 жыл бұрын

Lloyd “Old Timer” here. Just saving that stock l’m sure far exceeds most folks capabilities. Great work. You save a piece of history, that’s more than most can say. Keep up the good worry and don’t waste your time worrying about what those who talk but do nothing constructive have to say!👍

@adsdentiste 6 ай бұрын

Μπράβο εισαι υπέροχη ψυχή

@uncle_spanky 3 ай бұрын

👍 considering that the first 20 minutes of the video was to stabilize the wooden stock, that most people would have thrown away, I'm extremely impressed with your knowledge and capabilities. Very well done with the little you had to work with! 👏👏👏 GREAT JOB!

@dcvk6250 3 жыл бұрын

My man with the New Vegas hunting rifle

@MeatGawds 2 жыл бұрын

Damn. That whole varnish system is off the charts.

@MR.B00_ Жыл бұрын

When your video started, I saw that gun and I just thought "Wow! That would look sweet on my gun rack". The tin patch gave it history, and I was pissed that you were going to destroy that. I loved it just as it was. But I admit, you gave it a fine restoration. You know what you're doing. The gun turned out beautiful. WHY IS THERE NO VIDEO OF IT BEING FIRED???

@Redtailedhawk99 2 жыл бұрын

Personally did a few smaller restorations myself, knives and such, but there’s something strangely satisfying about hearing someone sanding metal and wood at 900 mph. LOL! Nice job, by the way.

@kellymcgee8456 2 жыл бұрын

It looks very good for a "wall hanger" friend. I might recommend removing the firing pin when reassembling. It looks like about a 20 gauge shotgun. 0000 steel wool would knock some of the sheen off the stock and give it worn character. Thank you!

@jacobparker9606 3 жыл бұрын

Cold blueing, screw making, and gunsmith work seems awesome. I can’t help but think that 5 layers of tung oil and 00 steel wool over the wood finish you had would have taken away the brush marks. Also, with your skills, you could have given it an awesome butt plate. Nice work. Your electrolysis machine doesn’t mess around.

@restorerebuild3458 3 жыл бұрын

thanks a lot...

@krishnapatel3649 2 жыл бұрын

@@restorerebuild3458 kbllllbl

@MrDGoosen 2 жыл бұрын

I enjoyed this video. Well done sir. I am assuming that he is not a gunsmith based the square filed crown and trigger guard ends along with the phillips head screws he used as Gunsmiths are taught otherwise.

@stephenkaufman1059 2 жыл бұрын

i enjoyed watching this so much. I wasnt sure how I would feel about the wook paint job, but it came out amazing! Great craftsmanship. Well done

@thomasdrivas5317 3 жыл бұрын

😂 not gonna lie the first time I watched this I fell asleep up to the rust removal on the barrel but watching it again and I can't believe what I missed lol will stay awake this time.

@ianwilkins9010 2 жыл бұрын

I agree with all the other comments. Only problem I have is with the wood finishing. It really does need polishing to get rid of the brush strokes and give it a high sheen as a finish.

@Mr.Bananaover 2 жыл бұрын

กบโตขนาดไหนจำศีลได้

@stranotizio6700 2 жыл бұрын

Yeah let's cover the history with five hands of paint! Good job!

@Apophis1966 3 жыл бұрын

i will send my wife in for a full Restoration, greetings from Germany

@manuelst8258 3 жыл бұрын

hahahaha

@Seraphazaziel79 3 жыл бұрын

🤣

@elitedima9672 3 жыл бұрын

But your wife has lot of missing parts

@gabeelkins9059 3 жыл бұрын

@Adrian Shepard fg42 👀👀👀

@tawheedkeeper73 3 жыл бұрын

Yes you will find me good worker

@darenwunderlich4868 3 жыл бұрын

I don't really care for the "wood look" paint job, but the rest looks pretty good. I would have rather seen the wood filled, repaired as needed, and stained even if it did show the repairs afterwards. I have been doing some similar restoration work on an old Iver Johnson 12 gauge.

@EminAgalarov-zh4no 2 жыл бұрын

Yyü

@EminAgalarov-zh4no 2 жыл бұрын

Y r

@EminAgalarov-zh4no 2 жыл бұрын

T t u r

@mariolopez1613 2 жыл бұрын

Get in out of you tube lol

@shawnkiesel5349 2 жыл бұрын

Me either.. The old wood made it more antique in appearance.. Now it's just a sculpture...

@user-vq8oj5lm1t 3 жыл бұрын

Просто бомбическая рестоврация что было и что стало ну очень круто!!! Жаль что не было тестов со стрельбой, но работа проделана огромная!!! Большой лайк и море уважения мастеру за его труд и дальнейших успехов в нелёгком труде!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺

@ozziepete55 2 жыл бұрын

That was a great video well done. Fantastic to see that old rifle reborn.

@ThatMDubyaGuy 3 жыл бұрын

I will admit that I almost choked until I saw the horrific cut in the front receiver ring. It a deactivated gun, useless for anything except parts and decoration. As a wall hanger, great job.

@imfeelingfurniture2779 3 жыл бұрын

I disagree, not a good job, his faux finish on the stock looks like a horror movie, it looks like a back alley coat hanger abortion

@ThatMDubyaGuy 3 жыл бұрын

@@imfeelingfurniture2779 I think we cam safely assume that you don't work for Turnbull, so let us review. The videographer is in deepest, darkest, Britanistan, where firearms are destroyed because the day ends with Y. The gun itself has been destroyed, the front receiver ring cut to a point where it is as safe as the faux guns you see hanging in the rafters of burger joints right next to surfboards and washboards. I don't see any of your work here, for comparison, so my original statement stands.

@gunmasterdude 3 жыл бұрын

This rifle gives me Fallout vibes.

@pietersloft2318 3 жыл бұрын

Yaaaaaa totally

@gmb215 3 жыл бұрын

@@pietersloft2318 same

@matthewrosa7262 11 ай бұрын

Fine Job! -The Rest Of The Gun's Restoration Overcame The Not-So-Convincing Attempt Of Re-Creating An Authentic Wood Grain Pattern In The Stock. The Brass Work, Despite Being The Smallest Contribution Of The Restoration, Shows Skill In Offering A Sense Of Beauty To The Piece. But The Effort Of Cleaning The Very Delicate, Carefully Engineered Working Mechanism Of The Weapon Is A Show Of Your Best Skill (And The Hardest, Most Focused Work!) -Which Leads Me To Point Out That "The Proof Of The Pudding Is In The Eating!" -That Is, -CAN IT SHOOT?!

@charlesbaylis8650 2 жыл бұрын

As a gun guy i hate to see things like that happen to guns but glad people like you can bring them back

@mrDenny-fu7yt 9 ай бұрын

Mauser ???

@vincentkreipe5776 3 жыл бұрын

In my opinion it is some sort of mauser 98 action heavily modified and converted to a bolt action single shot shotgun. Former had has a flag safty and still got the third locking lug right in front of the bolt handle . The cut out in the front of the receiver has been done for weakening, so the gun can not handle the higher pressures of a rife cartridge any longer. By that also one of the former two locking lugs at the front of the bolt was cut. In the back of the receiver there is an other cut out, so the gun can't take stripper clips any longer as well. Magazine box and floorplate has been removed, as well as the long extractor. Also the gas shield of the bolt sleeve has cut off/grind of and the front of the reciever might milled to smaller diameter. The barrel seem to me like the original stepped barrel with increased bore diameter.

@user-bc2vy8dd2l 3 жыл бұрын

ككمنتةالازظ،وازووةاغاىىىاال

@davidsingleton2660 2 жыл бұрын

i had a winchester model 41, .410 bore when i was a kid. killed a battleship full of squirrels with it. pretty close in design to this one. only smoothbore shotgun i have seen that had factory rifle sights. it was cracked about the same way at the ejection side of the bolt. wondered what caliber/bore/manufacture this was, your estimation seems as reasonable as any, to me.

@sionsoschwalts2762 2 жыл бұрын

Mod 98's don't have a split reciever bridge. The bottom of the reciever looked like a 92/93. The cut out was probably so the extractor could reach over the rim when locked up,I have seen similar in an old Mannlicher action.

@vincentkreipe5776 2 жыл бұрын

@@sionsoschwalts2762 like - other comments sayed - the action is a (modified) 1893 ottoman mauser. You might be right, that the cut out at the side of the reciever let the extractor jump over the rim of a shotshell.

@map3384 2 жыл бұрын

I actually thought it was a Needle Gun.

@ZygmuntKiliszewski Жыл бұрын

Very precise refurbishment of this rifle, both the stock and the rest of the metal parts, congratulations 👌.

@will9357 2 жыл бұрын

Congratulations, I didn't think it was possible to do literally every single step the wrong way... but you proved me wrong.

@tjolle62 8 ай бұрын

Nice job by giving this rifle a new life and thank you for sharing 👍

@shawnclements7022 2 жыл бұрын

It takes alot of patience doing a project like this but definitely well worth it in the end.Beautiful job keeping it all original!

@TheMongo1357 2 жыл бұрын

I am an Amateur Gunsmith (Self taught so far) and a multi brand/make certified Firearms Armorer!! I have an old Mosin Nagant in this condition and wondered what I could with it?? Your video was awesome and very informative! Meticulous craftsmanship as well!!

@williamguillIII 2 жыл бұрын

Take some 0000 steel wool to the metal, but don't polish it too much or you'll remove all the patina. Mosin Nagant parts are readily available from different suppliers. You can even re-barrel them to another caliber if you wanted. If the wood is chipped, dented, cracked, etc. be careful with sanding the stock too much, unless you want to make it look factory new. If you want to keep the value of the gun, or any old gun, don't do what he did!

@will9357 2 жыл бұрын

If you want to learn what to do with an old Mosin-Nagant, watch Mark Novak's channel, not this clown.

@demonbright7292 Жыл бұрын

@@will9357 finally, someone saying the truth about this dude. that video hurt to watch from beginning to end .

@clubsoda85cook55 2 жыл бұрын

Going thru all work to restore a gun and hang it on the wall, is like restoring a classic Corvette and not putting a motor in it. But kudos on the repair it looks really good.

@trent3902 2 жыл бұрын

The rifling was most likely rooted, so it was useless if not dangerous.

@uncle_spanky 3 ай бұрын

Guns that old and obviously not taken care of are generally NOT SAFE to shoot with modern ammunition.

@Beard996 2 жыл бұрын

You dont need a watch when you working 😉

@rus333. 3 жыл бұрын

Отличная реставрация! Привет из Беларуси!

@restorerebuild3458 3 жыл бұрын

Благодарность

@davev.4364 Жыл бұрын

Excellent work! A lot of love was put into this restoration!!

@user-fe9zn8jm4b 4 ай бұрын

DAMED THAT IS AWESOME WORK

@user-lf7uu1sr1o 5 ай бұрын

Santa Claus needs to bring you a sand blasting cabinet for those metal parts.

@walteralvarez6668 2 жыл бұрын

Exelente trabajo, un genio el maestro, felicitaciones.Soy Wálter de Villa Carlos Paz , Córdoba, Argentina.

@veterbars-veter4409 2 жыл бұрын

Парень, ну и терпенье у тебя...!!!👍видео, что надо.. ! Уважуха...!✊

@mastinri2514 2 жыл бұрын

Fili fornok

@Willian_Boa_Tarde 4 ай бұрын

Nice job! Cool wall hanger.

@michaelrichter1855 2 жыл бұрын

"Handwerk hat goldenen Boden" altes deutsches Sprichwort. Wunderbare Arbeit,Liebe Grüsse aus Berlin-Wedding, Deutschland

@ricklindsey5216 3 жыл бұрын

Watching and trying to learn- I got an old Mauser and a old shot gun that need some work. But I need a lot more watching before I try. Got some old guitars that need work also. Fun to watch

@hendrihendri9021 2 жыл бұрын

Noo

@richardeverett7124 2 жыл бұрын

Look into rust bluing. It converts the old red rust an gives a better finish that can be done at home. Its labor intensive but you will be happy with the results. If your stocks have dings don't try to sand the marks out . It's a old gun it's supposed to have character. Cleaning old stocks with just fine 000 or 0000 steel wool an mineral spirits will give nice results. Us a wood wax on the stock an all metal parts on the outside of the piece will conserve it. Grease an oil everything on the inside. Take your time an have fun. I found old tools is a good place to practice.

@galaldarwesh4371 3 жыл бұрын

Really, you are very very professional.

@restorerebuild3458 3 жыл бұрын

thanks a lot...

@thecanadianlanboy8132 3 жыл бұрын

No he is not. That gun was shoddily re-finished, and would be borderline dangerous to shoot.

@martinz2772 2 жыл бұрын

A new one looks even better.....

@lpn828 3 жыл бұрын

Very good restoration 👍Your rifle is ready for the WW3 🙂🇧🇪

@angelesquivel9418 2 жыл бұрын

👏👏👏 excelente trabajo ha rescatado o revivido un pedazo de historia. Lo felicito!!!!

@RMZ413 3 жыл бұрын

POV: you’re at the gun store in RDR2 cleaning your rifle for $10

@valentinpasc6496 9 ай бұрын

1,50$

@riddledstream8603 2 жыл бұрын

Your love for that old stock is unbelievably incredible.

@terryboone3333 2 жыл бұрын

You got some mean sanding skills.

@lordandpomeroy 2 жыл бұрын

I have two rifles in this very condition. I’m going to try my best to restore although I don’t have the tools or workspace you have but dam it I’m gonna try. Thanks for sharing!

@galaxymilk701lol9 2 жыл бұрын

Id buy one of your rifles anyday. No matter the condition

@dikirenaldi6514 2 жыл бұрын

@@galaxymilk701lol9 d

@salemnikolaevichmorozov3563 3 жыл бұрын

This definitely isn't some factory rifle...looks some kind of built up hunting rifle from what looks like a mauser action...peculiar...Also, before the restoration seemed IDENTICAL to the hunting rifle from Fallout New Vegas...Excellento job BTW...Turned out REALLLY nice...

@marknovak8255 2 жыл бұрын

1903 springfield

@user-zg8oc4dg8k 2 жыл бұрын

ในหลวง,

@lisiatepalu7737 5 ай бұрын

Thankyou for doing a good beautiful job 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

@HiveQu33n 2 жыл бұрын

everybody gangsta til the epoxy glue+sawdust combo comes out

@Jonathan-hz4yg 3 жыл бұрын

So.... I really enjoy a good restoration. This stock repair was a good attempt, but would have used that old wood stock for kindling

@7tree1sensei 3 жыл бұрын

Looks like an old Mauser that has been converted to a single shot shotgun. Notice that there’s no magazine, and there is a large hole milled in the side of the receiver, presumably to extract spent shotshells manually. Very interesting piece.

@angelamaldonadorivera2545 2 жыл бұрын

Bien trabajado

@zartan7779 2 жыл бұрын

I liked that metal patch you removed . Someone did a good job strengthening it .

@josesiqueirasilvazuzasique1102 3 жыл бұрын

Você trabalha com uma dedicação muito grande parabéns. Ótimo trabalho.

@pedrosouza2740 2 жыл бұрын

Invés Fillmesdeasssao

@foxynoway 3 жыл бұрын

The paint of the wood is really diareah :)))

@johnbennett7244 8 ай бұрын

One of the more interesting videos I have seen. Good job.

@craigheislen3304 2 жыл бұрын

Thank you for reminding me of why i don’t do wood work.

@nelsontrindade251 Жыл бұрын

Perfeito lindo trabalho, amei tem que ser ótimo profissional pra fazer um trabalho desse. Parabéns

@raimundogurgel8983 3 жыл бұрын

Ficou uma maravilha!!

@direravenext3815 2 жыл бұрын

I found an old browning pump shotgun against a post on an abandoned house. Had been there so long it created a indention in the wood that was keeping it from falling over. Had a bush growing beneath it and going around it. Was pretty cool.

@user-on8fy9rh5w 2 жыл бұрын

า

@user-il4nd6cf1r 3 ай бұрын

Bom dia meu amigo abicha ficou top de mais muito legal parabéns.

@user-il4nd6cf1r 2 ай бұрын

Meu amigo é coisa de outro mundo o seu trabalho é muito bom mesmo valeu fica na paz e uma boa noite pra você

@robco6997 3 жыл бұрын

Gunsmith's the world over are crying into their cups.

@jonathanstout2467 3 жыл бұрын

actually we are laughing. this is horrible. don't ever do this.

@CrazyMagicHomelesGuy 3 жыл бұрын

Im not even a gunsmith but I'm crying too. Id make a stock and see to get someone with more experience to dig out the magazine and trigger grooves. Never would I use car filler putty on it. Maybe id also see with a gun smith to shorten it for like 5 inches as I don't think I'd use it ever again. Its too valuable.

@dr.samuelhayden9152 3 жыл бұрын

C'mon man! Nobody cares what gunsmith think or do. If you are going to have a rifle in your home. This is the kind you should have. You know what I mean?👍😎

@jonathansand5117 3 жыл бұрын

Yeah he screwed the stock repairs up and tbh I think that stock should have met a bon fire unless it's like 22lr or something. It was way to damaged to handle heavy recoil. Besides that it's not terrible. I mean the blueing job could have been done better and he may have polished things to much in sensitive areas but assuming the polish wasn't excessive and the round that is shot is very low in recoil it should go bang and not kill/hurt anyone. From what I can tell that rifle has been decommissioned already anyway. Look at the receiver and the cut taken out.

@pinkytt 3 жыл бұрын

this is a gun rape!

@ddselvig 3 жыл бұрын

Give him an A for effort and a D- for aesthetics. Definitely a wallhanger!

@myitbos1335 3 жыл бұрын

Was a better looking wallhanger before the "restoration"

@josephmartinez7504 3 жыл бұрын

@@myitbos1335 if he just took the rust off, sanded and oiled the stock, then it would've been a perfect beat up decorative piece

@martisendrell9305 2 жыл бұрын

That was undoubtedly impressive.

@jamisonmaguire4398 2 жыл бұрын

What a great job but I don't understand why you would go through so much trouble for a wall hanger. Unless of course it was just for practice.

@vantwembekeeric6603 2 жыл бұрын

C'est une vidéo assez longue, mais lorsque l'on voit comment cet homme rénove ce vieux fusil, c'est époustouflant, magnifique. Toutes mes félicitations, cher Monsieur pour votre patience et vos efforts.

@thadiuswagner4780 2 жыл бұрын

Me as an actual gunsmith when he pulls out the paint:🤦‍♂️

@joejazwinski8873 2 жыл бұрын

I'm surprised his nails weren't painted.... guy paints EVERYTHING... SMH

@capncacus8868 2 жыл бұрын

I mean, it is his rifle, he can do what he wants with it

@alumalex4517 2 жыл бұрын

@@capncacus8868 depends on if he bought it or found it

@blackguy8572 2 жыл бұрын

What are the downsides to painting a rifle?

@whitechapel8959 Жыл бұрын

Fucken hell. The wood is fucked man. This stock is basicly a dn look peace I give it a good drop from 5 feet or a 20 to 30 rounds before it breaks.:0

@nikicamarkovic800 4 ай бұрын

Umjetnik. Sve pohvale!!!

@spicymonkey5546 2 жыл бұрын

I want this. Is too much to ask for an old, beat up firearm thats ready for restoration. Its all I want in life

@vitezizsrednjebosne1596 3 жыл бұрын

Hello from Bosnia and Hercegovina nice job.....fantastic pozz ppn vitezovi

@Aft1940 3 жыл бұрын

Greetings from turkey

@restorerebuild3458 3 жыл бұрын

👍

@arouetmartel5054 3 жыл бұрын

Nice show piece, but you sanding down that locking lug tells me you will not be shooting this firearm again.

@alynxt-t3813 3 жыл бұрын

why?

@TacticalTerry 3 жыл бұрын

@@alynxt-t3813 It can make the rifle dangerous to shoot since the locking lugs help keep the burning gases of the gunpowder in the receiver. Edit: It appears that the rifle had already been cut out on a part that sees a lot of pressure, so it probably would not function anyway.

@Brennan_the_smith 3 жыл бұрын

Can't do it anyway look the reciver has been cut

@lloydlamb4984 2 жыл бұрын

Old Timer. To all those who keep saying the wood should have been replaced, I say to you, you simply don’t get it!! Save you criticism for those things you understand. Have a great day.

@RUSTYCHEVYTRUCK 2 жыл бұрын

He says in the description he’s not gonna shoot it

@ronniehall1520 7 ай бұрын

Enjoyed watching Good Job

@yilmaz33akar 2 жыл бұрын

wooww super work

@originaltasmanian5321 3 жыл бұрын

Great job, I have done several restorations and I admire his strive for perfection.

@RickNCR 3 жыл бұрын

That looks like its from fallout 3

@juliocesarchagermanos8868 3 жыл бұрын

Fantastic work of the Master.

@creationorevolutiontv4023 Жыл бұрын

Good job! Very satisfying restoration process! 참 잘했었요

@motorcop505 3 жыл бұрын

I highly recommend that you watch Mark Novak's Anvil channel before working on more weapons. This was a disaster. Watching his videos can prevent you from making so many mistakes in the future. That stock coating was a nightmare. I'm sorry to leave such a comment, but you really need to learn what you are doing before more guns get destroyed. The metal should have been disassembled and then boiled before being carded. It shouldn't be wire brushed or sand papered. The bluing was still there and almost certainly didn't need redoing if it had been boiled first. Please watch Mark's videos before you work on another firearm!

@hgghgguk 3 жыл бұрын

that "gun" was "destroyed" before he even touched it LUL

@mickgrimes9078 2 жыл бұрын

i wish i could laugh react this comment tbh

@jandec6800 2 жыл бұрын

Brawo mistrzu broń cudo

@cyrilcastel1569 Жыл бұрын

Magnifique bravo 👏👏👏👏

@maximilienlestrat8191 3 жыл бұрын

Tellement satisfaisant. Beau travail 👌

@ronaldohertzch5171 2 жыл бұрын

Bom dia. Acompanhei todo o trabalho de restauração feito pelo senhor. Realmente é um trabalho irretocável! Um dos mais bonitos que vi. Eu espero que o senhor poste mais vídeos assim. Parabéns! Fique com Deus. Ronaldo. Rio de janeiro - Brasil.

@stephenbarber8010 2 жыл бұрын

Obrigardo.

@Mr.SenatorBossman 2 жыл бұрын

4:04 wow you are really fast at sanding

@hillbillyfranks 5 ай бұрын

Just subscribe to you good job On that gun Have a good day

@CrocodllDO 2 жыл бұрын

SO MUST PERFECT !!! YOU COOOOL MAN! I live in Russia and i love wathes your video!! Thx

@user-dk4io9lg8t 2 жыл бұрын

Сколько же ей ( винтовке) лет интересно и какая это страна ? Получилось супер и дал вторую жизнь изделию !!!

@user-pl6xp4dd5w 2 жыл бұрын

Страна - Греция . Вот разве может нормальный человек , выдержать вот это - " супер и дал вторую жизнь изделию !!! " Да что ж такое , смотрю третьего подряд , умельца реставратора , - пакистанец , итальянец , грек , а папа похоже у них один , строитель пирамид из египта .

@dianeruiz0721 3 жыл бұрын

Very impressive and nicely done for display purposes.

@c-leat9981 Жыл бұрын

Wow mate this has got to be the best restoration I've ever seen done 100%

@randycarter2427 2 жыл бұрын

Good job,Buddy l love old guns,new guns,used gun-All Guns👍

@Landscape.Architect 3 жыл бұрын

I DON'T KNOW WHY PEOPLE DISLIKE THIS VIDEO...?

@einhundertfunfzig4919 3 жыл бұрын

Because they didn’t like it.

@karvast5726 3 жыл бұрын

Maybe because a lot of his methods aren't really what a good gunsmith would do. I really don't care as far as i'm concerned he did it like he wanted to do and if he wasn't there this gun would have ended up in the scrap bin anyway.

@restorerebuild3458 3 жыл бұрын

@@karvast5726 👍

@jumperpence 3 жыл бұрын

Excellent job, I think I would have finished the stock with wirewool to knock back the shine a bit

@imfeelingfurniture2779 3 жыл бұрын

The shine? It looks like dog shit spread around with a paint brush, there is not even enough finish on it to wool it without tearing the “water based polyurethane varnish “ off, people varnish and polyurethane are different things, and also all of the water based polys are bullshit

@jacobbooth9263 3 жыл бұрын

Yea I was about to say the shine threw me off, I would’ve used wood filler and sanded it smooth, used a torch to burn over the imperfections and sand it down a bit, slap it with some poly and itd look great.

@workonitm8 2 жыл бұрын

@@jacobbooth9263 Linseed oil for stock finish.

@aleksandarvuckovic6739 3 жыл бұрын

Very.simple but very professional restauration bravo

@lyphan2667 2 жыл бұрын

Anh là một người rất khéo tay. Rất phục tài năng của anh.

@MateusSilva-di9oq 3 жыл бұрын

Amigo, se eu fosse vc optaria por produzir uma nova coronha, mas msm assim ta perfeito seu trabalho, perfect

@restorerebuild3458 3 жыл бұрын

obrigado meu amigo...

@MateusSilva-di9oq 3 жыл бұрын

@@restorerebuild3458 não sabia q vc falava minha língua kkk

@user-hq1oe7pm1l 3 жыл бұрын

Однозначно руки из правильного места,👋👋👋👍

@normanehrstein6088 3 жыл бұрын

Absolutely a great job, one thing I thought that should have been done . I would have rounded the corners on the trigger guard and it should have been bedded in the stock. I picked up a lot of ideas from this video, Thanks a lot.