Old Truck Full Restoration In Under 10 Minutes-1989 Chevy S10 blazer Rebuild Square body k5
Рет қаралды 22,196
3 жыл бұрынThis 1989 Chevy S10 blazer was only $250 and it came with most of the parts needed to restore it. It’s been sitting untouched for 10 years now, watch as we get this thing back on the road!
Subscribe for more rebuilds!
Old car full restoration projects
Rebuild projects
S10 Blazer 4x4
C10 Chevy
K10 Chevy
K1500 Chevy
K5 blazer restoration
@countryboyk5411 2 жыл бұрын
That midnight blue looks sweet!
@Mike_The_Hog_A_Nator 2 жыл бұрын
Beautiful!! I have an 02' tan on black Blazer zr2 that I paid $3k for 4yrs ago & she's got almost 300k miles on her with no rust down here in SE Tx., still looks & drives like new.. Garage kept. She actually runs better that my Wife's new car! That 4.3ltr engine is a beast. I love that color
@cap3724 Жыл бұрын
I’m about to get one from my grandparents stay tuned for 400$
@tristanlawson3088 2 жыл бұрын
Awesome looking blazer i need to do that to mine
@s10_4_life6 2 жыл бұрын
I'm 2:03 into the video and I already see something that you did wrong, You can't put Body Filler over Smooth Bare Metal, The Bare Metal has to be scuffed up in order for the Body Filler to stick to it, if not scuffed then the Body Filler will crack and start breaking off probably within a year or so...
@tristanlawson3088 2 жыл бұрын
I need to do that color on my truck looks nice👌
@lifeofjoe4942 3 жыл бұрын
Nice job dude
@LuisRivera-qu1el Жыл бұрын
Looks great 👍 good job
@humbertoperez9156 2 жыл бұрын
Excelente trabajo
@Ayeooh 9 ай бұрын
New to restorations, was that bondo that you "coated" the vehicle in??
@codyhusssalvagerebuilder6330 3 жыл бұрын
Nice video man
@almostoem4885 3 жыл бұрын
Thanks man
@DavidStirm 2 жыл бұрын
What fender flairs did you use?
@dylanmesenbrink5036 3 жыл бұрын
Sheeeeeeeeeeesh
@8040titan Жыл бұрын
Well played, need to do the same to my blazer sitting under a tarp😡
@mys15jimmy 3 жыл бұрын
What did you lay down for prime
@anthony_sasquatch8056 2 жыл бұрын
What fender flares?
@davidantoniolopezangulo2938 2 жыл бұрын
Where did you buy the fender corners
@arielibuado9990 2 жыл бұрын
Where did you get the Fender flares from
@djdominorgv 5 ай бұрын
What size lift?
@danildanilov8379 9 ай бұрын
2WD ?
@tetelestai_itisfinished1809 2 жыл бұрын
Just seen it for sale at midstate sales, $7,995.
@arturoELchurro69 2 жыл бұрын
Over time how does the puddy hold up?
@DavidStirm 2 жыл бұрын
It looks like it would be wrong but it's a very thin skim layer that will be almost completely sanded away like 90% of it will end up on the floor. That's actually the way you want to do it. That's how you get that extra smooth paint job.
@johndurham7249 Жыл бұрын
my god that's pretty. I have an 85 S-10 Blazer in central MN and I'd love to make it look that good. before this video I thought mine was rough, but you made a gem out of a prettier vehicle than mine. anyone know what that would cost a guy to have done?
@almostoem4885 Жыл бұрын
I could do it. Give me a call 2185139159
@jasongrooming36 5 ай бұрын
Those fender flares ruined this. Also painting that air dam below the front bumper will make it look terrible within a year of regular use.
@papis_dad1847 2 жыл бұрын
Ok now I’m no expert so if I’m wrong and you are a professional then by all means correct me but in my personal opinion he used a little too much bondo...
@DavidStirm 2 жыл бұрын
90% of that filler will end up dust on the floor. He actually did the bodywork absolutely 100% correct. That's how you get a good paint job doing it correctly lol 😂
@papis_dad1847 2 жыл бұрын
@@DavidStirm isn’t that a little wasteful?
@DavidStirm 2 жыл бұрын
@@papis_dad1847 no
@papis_dad1847 2 жыл бұрын
@@DavidStirm ok
@s10_4_life6 2 жыл бұрын
@@DavidStirm Sorry but No the way he did it was Not 100% Correct LoL, If he had any Low Spots (Dents) or even any High Spots then instead of using Body Filler to fix the problem he should of use a Body Hammer and Metal Dollies to straighten the Metal out...
HUMMUH's HorsePower
Рет қаралды 18 М.
Авто Гараж 23
Рет қаралды 4,5 МЛН