Oliver 1955 Injection Pump Install: Did We Turn Bark Into Some Real Bite? Time Will Tell

Рет қаралды 16,993

Oliver66FarmBoy

Жыл бұрын

It is definitely more responsive.

Пікірлер: 117

@africadreamin Жыл бұрын

What a beautiful-looking and sounding Oliver, I first came across Oliver tractors in Australia in the early seventies and always thought their colour scheme always stood out, thanks for posting.

@joshalger6059 Жыл бұрын

You really have some nice tractors man...that 1955 sounds beautiful...my great grandfather was a big time oliver man and I wish I could show him these! Thanks for the awesome videos and keeping that old iron alive as well!!

@darweb3417 Жыл бұрын

1955 is a great machine, glad to see it renewed.

@johnbender1596 Жыл бұрын

Michael, if my memory serves me correctly there was a Oliver Service Bulletin in 1974 that said the 1955 injection pump should be timed at 0 degrees. When this was done it reduced cylinder pressure somewhat and they actually started better with the retarded timing. For myself I never removed the pump drive shaft when removing or installing the injection pump. The pump shops do not need the drive shaft to work on the pump. You can always fine tune the timing with the mount slots. Great to see a 1955 short wheel base again. Thanks for the video. Love the sound!

@Oliver66FarmBoy Жыл бұрын

There were 2 service bulletins. The first one was to reduce the timing advance on the 1855 from 4 degrees to 2 degrees to reduce heat and cylinder pressure. The second one said to time all 310 turbos to TDC to aid starting. But if everything in the engine is on spec or better there is no need to do it. And I’d rather put the shaft in the pump rather then try to balance the pump, start the umbrella seals without rolling them and start the bolts all at the same time.

@canvids1 Жыл бұрын

First post didn't go through nothing new there. Just like to say I have been following you for a long time, when you stopped and now come back. You have so much knowledge in that head of yours, Thanks to Dad for teaching you at a young age. Great job you did on this tractor hope that you are proud.

@mattutke4704 Жыл бұрын

Great work on the 1955 Ethan, it really runs like a champ now 👍🚜

@tca375 Жыл бұрын

Man she sounds good!

@royscarbrough3589 Жыл бұрын

Very exciting when things work. Blessings

@Oliver66FarmBoy Жыл бұрын

Thanks.

@lawrencekiel-sr2772 Жыл бұрын

Uh- oh, it's now the Intimidator. Great work, Ethan 👏 👍

@49er61 Жыл бұрын

Nice job on the beast sounds great I have a 1655 a little toy in comparison. Oliver's living on. I grew up with them and will die with them. Thanks for awesome video Ethan.

@hacc220able Жыл бұрын

Thanks for sharing.

@Oliver66FarmBoy Жыл бұрын

Thanks.

@SluSharkND Жыл бұрын

Nice job. Everything is coming together nice!

@Oliver66FarmBoy Жыл бұрын

Thanks.

@dehavenfamilyfarm Жыл бұрын

She sounds good- can't wait to see how she does in the field!!

@Oliver66FarmBoy Жыл бұрын

Thanks.

@koreymartinson7238 Жыл бұрын

It'll be fun to see that beast in the field!

@Oliver66FarmBoy Жыл бұрын

Hopefully it made a difference

@garyharrington5300 Жыл бұрын

I'll bet she runs great now ! Great work brother

@Oliver66FarmBoy Жыл бұрын

Hopefully

@tomthompson489 Жыл бұрын

Yeah Oliver 1955. Sounds like a new an old better. Also 1955 the good year year I was born. She’s ready to plow. Thank you. Good days work.

@johnkissack5295 Жыл бұрын

Good job on the pump and really good you checked timing.

@Oliver66FarmBoy Жыл бұрын

Thanks

@dennisneel9788 Жыл бұрын

So awesome

@tonyjones9715 Жыл бұрын

Sounds great to me 👌

@acdiesel7439 Жыл бұрын

Nice, sounds good. Can't wait to see what it does in the field. I had the same problem with the banjo fittings on my 190xt and now fighting with the D17 when i put the pumps back on, chasing leaks until it stops. Glad this one didn't give you a fit.

@michaelsheeder148 Жыл бұрын

Sounds like getting the fuel system setup the way it should be in the timing, like it's supposed to make a world of difference! Thanks Michael

@Oliver66FarmBoy Жыл бұрын

Hopefully

@stephenheyes4324 Жыл бұрын

Sounds sweet

@davidkimmel4216 Жыл бұрын

Sounds great

@Oliver66FarmBoy Жыл бұрын

Thanks.

@Husker3435 Жыл бұрын

Great stuff OFB, stout looking and now stout running beast, sounds great. I’m ready to see her work💪🏻keep em comin bud🇺🇸

@Oliver66FarmBoy Жыл бұрын

I’m ready to run it.

@randysipp8193 Жыл бұрын

Hi Michael the old gal sounds good and looks great i sure would love to own it great To see old iron still being used

@terryhawkins4295 Жыл бұрын

Sounds good!

@Oliver66FarmBoy Жыл бұрын

Thanks

@KCIREDERF10 Жыл бұрын

Nice Ethan. Can't wait to see you work her. Thanks for the update. Take care. Fred.

@Oliver66FarmBoy Жыл бұрын

Thanks.

@jonathancrissinger2301 Жыл бұрын

Sure sounds great to me. Glad to see you get it back together. Now I want to see it in the field. That thing just looks like a beast.

@Oliver66FarmBoy Жыл бұрын

I want to get it back on the 5 bottom

@wisconsinman2755 Жыл бұрын

glad to see the old girl back. It was very surprising how easy it started, my 4020 does good on cold starts but not that good, even with the fuel system primed and ready to go lol.

@davidkimmel4216 7 ай бұрын

Sounds strong.

@bige3473 Жыл бұрын

She sounds great. Good job. My 18 year old son found a 1955 that had been sitting in a barn for 3 years. He has it running and we will put it to work this summer. Love the sound of those tractors. Thanks for the videos.

@Oliver66FarmBoy Жыл бұрын

Nice

@Adam_Poirier Жыл бұрын

That tractor sounds hot. Looking forward to seeing it on the dyno with my earbuds in lol

@Oliver66FarmBoy Жыл бұрын

Hopefully

@404nitro Жыл бұрын

That sure sounds nice!

@Oliver66FarmBoy Жыл бұрын

Thsnks

@TKM1951 Жыл бұрын

Nice ! She looks parade ready

@PAYNEKILLER.. Жыл бұрын

That is one attractive tractor.

@Oliver66FarmBoy Жыл бұрын

Thanks.

@iowaoliverguy Жыл бұрын

Sounds good, nothing sweeter than a 310 when it's running good. I had a 1950-T that started on 2 cylinders as I tightened the lines up. I've started it sitting outside at -5F without a block heater, just the manifold pre-heater.

@andrew81au Жыл бұрын

The 1955 wants to run. Sounds great.

@Oliver66FarmBoy Жыл бұрын

Didn’t figure it would prime that easy.

@orenminton405 Жыл бұрын

She sounds really good

@Oliver66FarmBoy Жыл бұрын

Thanks.

@jamesbreault5762 Жыл бұрын

Great job Ethan the 55sounds 👍👍👍👍 great

@mathiggins4264 Жыл бұрын

It sounds good buddy be safe out there your buddy from Nebraska

@Oliver66FarmBoy Жыл бұрын

Thanks.

@brianjohnson7317 Жыл бұрын

Dad bought an early 1800 in the early 60’s and it stayed in the family until after 2000 when my brother traded it off. I put many a day on it.

@clinthochrein888 Жыл бұрын

Ohhhhhh! Now she’s singing a good tune.👍🏾👍🏾

@Oliver66FarmBoy Жыл бұрын

Yep

@glennschlorf1285 Жыл бұрын

Grrrrrrrrrrrr go Ollie go!!!!

@Rumblestrip Жыл бұрын

Sounds fantastic... Gotta hook something to it lol

@Oliver66FarmBoy Жыл бұрын

Field work is coming fast.

@kevinsiedschlag429 Жыл бұрын

3208 cat was a great cold starter, 15 degrees n one revolution or less n away you go. If all was up to snuff!!

@Oliver66FarmBoy Жыл бұрын

Some yes some no. I have one that needs help every once in a while.

@mikemccrory8309 Жыл бұрын

Some old Roosa master pumps are timed to end of injection on early 10 series JD. Found that out the hard way years ago overhauling one for a neighbor once. Would not start without either.

@Oliver66FarmBoy Жыл бұрын

Interesting. Seems counter intuitive

@roadhogg1418 Жыл бұрын

She sounds snappy Farm Boy!!!

@Oliver66FarmBoy Жыл бұрын

Yep

@terrycannon570 Жыл бұрын

You have had that cough for a couple of weeks wishing you good health..

@farmboy5442 Жыл бұрын

It sounds good I'm looking at buying a 1850 and it has a Cummings in it

@dalecoffing8655 Жыл бұрын

Amazing. Nothing like the sound of a 310 with a turbo. They start a lot better than my 404 in a 4230. If it gets below 35 we plug it in. Nice work kiddo,

@Oliver66FarmBoy Жыл бұрын

Nothing is worse than a 466 in a 4240.

@dalecoffing8655 Жыл бұрын

@@Oliver66FarmBoy I've heard they are hard starters. We also have a late 4440. It starts really well. But the best starter is our White 185. Typically if it spins over 2X it's running.

@deronlogterman2951 Жыл бұрын

It sound mean now. Good job

@Oliver66FarmBoy Жыл бұрын

Yep

@bosseliminator Жыл бұрын

4020 with updated pistons cold starts real easy.

@Oliver66FarmBoy Жыл бұрын

A well tuned Waukesha starts good right out of the box. What’s your point?

@maxpuppy96 Жыл бұрын

Get some Stanadyne fuel additive for the fuel, low sulfur diesel fuel tears the hell out of those Roosamaster pumps.

@craigadair128 Жыл бұрын

It seems promising even with what little you were able to do with it.

@Oliver66FarmBoy Жыл бұрын

Hopefully

@chrishunt5727 Жыл бұрын

It’s also tough to beat a David Brown for the cold start!

@michiganfarmer5208 Жыл бұрын

I just had the pump rebuilt on my 1655 and reset timing just like you did but at 4 degrees btdc as book called. I noticed that most of the lope I had also disappeared .

@Oliver66FarmBoy Жыл бұрын

Guess I’ll see if it stays gone or comes back after some run time.

@michiganfarmer5208 Жыл бұрын

@Oliver66FarmBoy mine will try to lope some right at 850-900 rpms. Not below or above now. And the lope if very subtle compared to before. This 1655 is by far the best cold starting waukesha I've had. It can be 20 outside and I'll run the preheater for 40 seconds and she pops right off. Not being plugged in or anything. I wonder how many of these Oliver's with the known idle lope are actually suffering from lower compression? I always thought the lope was normal until I rebuilt this 1655. I've checked timing multiple times and everything else. It runs extremely strong and snappy.

@mikemoss9968 Жыл бұрын

It sounds good Ethan I'd like to see it pull a load

@Oliver66FarmBoy Жыл бұрын

Me to.

@charlesschouveiller1646 Жыл бұрын

I think it needs a cab now for your sprayer for use on the spayer. I think it would look cool with a tractor cab.

@kennyz6533 Жыл бұрын

He’s got a 2-105 in the works for that. Much better, more sealed cab on a 2-105 for keeping spray mist out anyways. Plus the 1955 looks really good open station. Chris Losey has one with MFWD and a cab if you’d like to see one.

@kennethwetmore1591 Жыл бұрын

There is definitely a difference between now and when you plowed for your boss but when you work it will tell the difference.

@Oliver66FarmBoy Жыл бұрын

I think so.

@nicklambing9268 Жыл бұрын

She's got a real nice crackle. Think you made some improvement, if sound means anything. Nick, North West Farmer (Oregon)

@Oliver66FarmBoy Жыл бұрын

Hopefully

@dennislamers986 Жыл бұрын

Purr's like a kitten

@Oliver66FarmBoy Жыл бұрын

Yep

@earldoubet8062 Жыл бұрын

Sounds great did you ever have the 1950t on the dyno I'd like to see this on the dyno . Are 1955 runs right at 120 hp . Ares have those timing marks also I about done the same dam thing . 310s sound os good with a turbo. From turkey creek farms be safe n thankful

@Oliver66FarmBoy Жыл бұрын

If I’m making 110 I’ll be satisfied

@bobrhonda4375 Жыл бұрын

Thats why alot of Allis' dont start well. They run 18-24 deg BTDC across most models. Im coming up near-ish you to pickup a Allis forklift tues. I can bring the dyno with me...LOL

@Oliver66FarmBoy Жыл бұрын

Damn that seems like an excessive amount of advance.