Ollie's 4x4 Willys Mini Jeep car Build EP 10. 4 Link Suspension Plasma Cut Metal Folder

No video

Ollie's 4x4 Willys Mini Jeep car Build EP 10. 4 Link Suspension Plasma Cut Metal Folder

Рет қаралды 32,368

Oliver Banford

Күн бұрын

Пікірлер: 22

@gregscherf9385 2 жыл бұрын

Keep up the good work. Can't wait to see this project completed

@oliverbanford 2 жыл бұрын

Thanks for watching!

@samakesouleymane2799 Жыл бұрын

J'adore ça.

@oliverbanford Жыл бұрын

Thanks for watching!

@hasebnzeha8917 Жыл бұрын

عمل رائع صديقي هل الهيكل ٤×٤سم

@oliverbanford Жыл бұрын

The chassis is 50mm x 50mm x 2mm mild steel box section. Thanks for watching!

@hasebnzeha8917 Жыл бұрын

@@oliverbanford شكرا صديقي انت رجل محترم

@oliverbanford Жыл бұрын

You are welcome 😊

@stevenpleasant5834 2 жыл бұрын

Hi Oliver real nice building skills you have looks real good how are you going to do the drive yoke on the motor and what is the transfer case out of thanks for your info keep on building.

@oliverbanford 2 жыл бұрын

Hi Steven. I have the spring loaded drive yoke from the quad, which we will mesh with the drive shaft from the transfer case. All of the running gear is from a Suzuki Jimny, we shortened the axles to make the mini Willys Jeep :) Take a look at the earlier episodes.

@hasebnzeha8917 Жыл бұрын

صديقي المحترم عمل ممتاز شو قوة المحرك لو سمحت

@oliverbanford Жыл бұрын

It's a TRX250 quad bike engine, it should put out around 20hp. Thanks for watching! 😊

@hasebnzeha8917 Жыл бұрын

@@oliverbanford شكرا صديقي

@oliverbanford Жыл бұрын

You're welcome!

@luisylinda Жыл бұрын

Excelente proyecto un saludo desde Ecuador no sé si me podría ayudar con la guía de la dimensiones y los cortes para poder hacer este proyecto y si se puede utilizar el motor de una moto 250cc

@oliverbanford Жыл бұрын

Thanks for watching! If you need any measurements just drop them in a comment. I've used a 250cc Quad bike engine in this project so your 250cc MC engine should be fine, easiest with a shaft output though unless you're going RWD 😉👍

@samakesouleymane2799 Жыл бұрын

S'il te plaît les dimensions de cette jeep.

@oliverbanford Жыл бұрын

I will post them if I ever get round to transferring them from the back of the cigarette packet 😎👍 Every dimension is exaclty 4/5 the scale of the original Willys Jeep, so 80% of full size. We took the measurements from a 1/12 scale model. Thanks for watching!