OMP M2 V2 - Fixing the self leveling issue.

Рет қаралды 20,475

2 жыл бұрын

Not all the M2's has this problem but it is great to know how to fix it. Mine drifted hard to the right when i had it in self leveling mode and was so hard to control. In Normal mode it works flawless. The fix works on any radio setup.
Flight video will be out as soon as we get some better weather. The one we filmed the other week was out of focus and frame.
During first test flight my tail slided out every time i tried an tic toc. But it is just a matter of small adjustments. A lot of videos out there to help with setup.
Thank you to elefun.no for providing us with these beautiful models.
elefun's OMP selections: www.elefun.no/aspx/produsent....
Spektrum NX10 : www.elefun.no/p/prod.aspx?v=5...
Hope this video was at any help for you.
Greetings from Bengt and Elna 😍

Пікірлер: 46

@goldenmanuever1176 Жыл бұрын

You are a true blessing in disguise. My M2 EVO was drifting to the right and I thought it was normal. I did this method 4-5 times exactly as you described and I got it pretty much spot on. Thanks so much!

@ArcticRc Жыл бұрын

Thank you sir🥰

@skypilot23 2 жыл бұрын

mine was already good but great to know this tip-thx

@wilsgrant Жыл бұрын

I just got an OMP M1 Evo and it had bad backwards drifting out of the box in self leveling mode. I found your video and it instantly solved my problem! Thanks for taking the time to share this with the community.

@timt1346 10 ай бұрын

Skip to 1:48 for the fix. Most of the video seems to be filler material and isn't useful, but if you care for the back story then watch the whole thing. Thanks for the info either way

@swango1 Жыл бұрын

Awesome tip! I had a slight drift to the left with my M2 Evo, this corrected that with just one hover for 20 seconds in the self-leveling adjustment mode. Many thanks from the US, and Merry Christmas!

@kensteltzner7879 Жыл бұрын

Thank you for removing my frustration wit my om[ m2. I thought I bought a piece of junk. It flys great now. you are a genious.

@raymhuang Жыл бұрын

Very helpful-worked wonders on my M1 too so I can fly indoor in super small area.

@talbahir Жыл бұрын

1000 Thanks! Great help in the way of satisfying flight!

@andyMSH700 Жыл бұрын

Nice christmas tree and i like the little house decoration. i have the M1 already and the M2 is on its way santa has got delayed with mine due to all our strikes in the UK :(. Thanks for the tips i had never seen this one before. Have a blssed christmas.

@blueromeo1974 2 жыл бұрын

Lot of pilot have this issue thanks for the help and video....

@ArcticRc 2 жыл бұрын

Thank you for the comment😊

@stigonutube Жыл бұрын

helped me a lot TNX, works on Eachine E120S with E6 Transmitter..transmitter must be in the (lower triangle lit up) "on screen" in H/L flick switch to go into calibration mode.

@ccbusa05 Жыл бұрын

I use this same drifting debug procedure on my XK X110 and XK K110s, works great!

@FLYBOY442ATP 9 ай бұрын

Thank you a ton. Works awesome!

@jimmyzhao2673 4 ай бұрын

I did this inside a big parking garage to ensure there was no wind.

@bubblef8073 Жыл бұрын

I have to do that tomorrow on the field just changed my shaft. Having a drift thx for the help

@ArcticRc Жыл бұрын

Great to be at help Sir. 😊 Please subscribe if you like our content.

@brettpennington3078 Ай бұрын

I am going to try this on my Goosky S2. It is is drifting bad to the left. Thanks !!!

@tommycruz100 9 ай бұрын

Thats great ,, never knew you could get in n out of self level mode by the elevator stick !!!! Another way is to set the gyro above 50 and below 50 for normal gyro ,,, i have the old spectrum dx6i transmitter,,,, above 50 puts it in self level mode ,,, this way you can switch modes while flying

@ModellbautechnikSalzkammergut Жыл бұрын

Cool

@kensteltzner7879 Жыл бұрын

Setting up the gyro's would be very welcome. Thank you for the time.

@kensteltzner7879 Жыл бұрын

thankthanj you for the information. Please do a video on setting for a spektrum radio for a omp v2. It would be greatly. appreciated.

@ArcticRc Жыл бұрын

We have done one . You just need to check videos on the channels you scroll thru. But here is a link for you. kzfaq.info/get/bejne/oqegir2F3c-5omQ.html

@ruslanabdullaev1631 2 жыл бұрын

Thanks a lot. I wonder where did you find out about this stable mode calibration?) In fact, it seems to me that they are trying to calibrate them from the factory, but very badly. If you reset the flight controller, the swashplate will be level in stabilization mode, but it still did not help me completely. It seems to me that after calibration it is still slightly tilted (of course, not as much as in your video, but just a little bit barely noticeable to the eye), apparently to compensate for the rotation of the tail rotor. What is achieved by your magical calibration.

@ArcticRc 2 жыл бұрын

The best way to calibrate is about 2-3 Above ground in no wind at all. Mine did drift a bit to the left in normal mode but after a quick swash setup in the gyro it is rock steady. There are good setup videos out there

@Dadge75 2 жыл бұрын

great video, do you no if it works on the m1

@ArcticRc 2 жыл бұрын

Not sure Sir. But it cant harm trying😊

@LichaelMewis 6 ай бұрын

I think this will also work with Goosky S1 and S2

@kensteltzner7879 Жыл бұрын

Is the red led the gyro light. When I hold elevator down. The red lstart ojutsolid and after I hold the elevator down the red starts blinking.

@joemusto5674 Жыл бұрын

I'm having an issue on a new heli where when I come out of idle up mode, the heli takes a long while for the head speed to slow down. This happens even if I set flat curves for normal, Idle 1 and Idle 2 (60%, 70%, 85%). Going up it responds instantly but coming down there is a few seconds delay before head speed slows down. Any ideas?

@ArcticRc Жыл бұрын

Im really not sure. But perhaps it is a setting in the esc for better auto rotation since it is direct drive. I need to test mine to see if it is the same.

@Rhino6722 2 жыл бұрын

What’s the difference between self leveling and normal mode….ie how do you get into those modes? Is that the same as your normal, idle 1, and idle 2?

@ArcticRc 2 жыл бұрын

Self leveling is like Safe system. If you panic just flip the switch. But many people also use it for learning. In Idle 1 and 2 you can do 3D flights and really let loose. 😊

@RC_B5 Жыл бұрын

what if using your idea but dismentle the blade? must calilbrate on air?

@ArcticRc Жыл бұрын

Well that is a great question. But i guess the gyro needs some movement in order to correct it self. But why not try it and give me some feedback. Im waiting for the M2 EVO as we speak.

@richardcalver6686 Жыл бұрын

Hi is it normal for failsafe to take off towards ceiling when swithed to 3d mode ???

@ArcticRc Жыл бұрын

Failsafe?? 3d mode? 3d mode is full throttle as usual. But in failsafe have you throttlecut on?

@franmisantone3230 Жыл бұрын

This was a great fix but after the 3rd time doing it now the heli is stuck in self level in all flight modes , Normal ,idle 1 and idle 2 any ides on how to get it back I have no idea how it happened

@ArcticRc Жыл бұрын

No sir. Never happend here. But there should be a way to factory reset the flight controller. Try to search for it on youtube or google. 😊

@franmisantone3230 Жыл бұрын

@@ArcticRc I already did a factory reset still didn't change it thanks anyway

@WatsitTooyah 11 ай бұрын

Does this work with an external receiver?

@ArcticRc 11 ай бұрын

As long as it is connected to the gyro

@johnpeabody6166 2 жыл бұрын

You didn't explain the settings for self levelling I have a futaba t6k

@ArcticRc 2 жыл бұрын

No settings needed. Just use linear Throttle curves and pitch curves. But make sure that you have the switch on another channel than your flight modes. You will set pitch and trrottle curves as you like in flight mode.

@johnpeabody6166 2 жыл бұрын

@@ArcticRc Thanks for the quick reply just learing to fly heli's having a problem understanding all the settings, I have been using the throttle cut has an emergancy