Just in case anyone is a newbe like me and struggles to use the model menues which are supplied in the links then perhaps this might help.. .-Few steps to load Joanas models to your Zoro TX with a windows machine. -Load FW 2..07.0 or latest FW to Zorro TX -Install EdgeTX companion ver2.8.0 on your laptop/pc -Connect Radio top USB port to PC -Pop up menu will appear on Zoro and select to 'connect with USB SD card' -On a windows machine go into device manager and check to see if it has found and loaded a driver for USB mass storage device without displaying an explanation mark…important*** -On LHS menus of EdgeTX Companion choose icon ‘backup radio to file’ just in case you get over excited and screw up the model menu  -On LHS menu’s of EdgeTX companion choose icon ‘read models and settings from radio menu’ and a sub menu with a model list should open. -Choose ‘file’ the ‘open’ and search for your correct model file which you want to install which has been previously downloaded to your PC. Select this file and open it which will result in a second window being opened in EdgeTX companion showing this model which you have just selected. -On LHS display simply add a new model and from the RHS screen drag the new model file across and drop it on the LHS new model which you have just created and it will ask you if you want to overwrite it…say yes. -Save file to computer and select icon which states ‘write models and settings to radio’ which will state that it has saved all model settings to radio. Simply look in the Zorro menu and the new model will be there. Bind it to your new Heli and away you go for another crash.

Great job on the making of this video. Answers all the questions I have. Thank you!!

Fantastic job done on the video as always...all questions answered and no stones unturned. I will be getting one when available in the UK.

Great flying buddy! I liked the auto at the end

Thank you for this video. Super content. Very nice fligth. 😮👍👍

I'm definitely getting one of these

Thanks for the video

Great video! Answered all of my questions including a few questions (indirectly) that I had concerning the flight controller vs. the FC on the M2V2 and if the firmware could be interchangeable in the interest of improving the M2 by simply (or not simply) LOL- flashing EVO firmware onto the older V2 FC.

Once again, thank you for the setup. Those numbers are spot on, flying my EVO with Futaba 14SG. So quiet, quick and precise. Love it! By the way, can I apply those numbers to my V2 from your previous setup on V2? Thanks again Jonas

Waiting for delivery :)

Got back into the hobby at a good time.. dug out my original mcpx bl a month ago and my dx7s and started flying. Forgot how much I enjoy it. I will be getting one of these and was thinking tx16s mkii max but now I may lean more towards the zorro! Mad my dx7s would have deadband issues with omp..

❤thank you

Epic!

I purchased the S2 legend because I was told that it had more power and longer flight times. Don't get me wrong I like it. But I'm going to go with Omp for something larger. The M4 is next on my list. Next season I will have one

Nice

Thank you for all the information - the heli looks amazing! I already ordered one and I am really looking forward to flying it. The only thing I am sceptical about is the new battery tray. I really liked the old mechanism - simple and effective. Like a fully grown heli 😀 I guess omp wanted to maximize the size of the battery or what's the reason for the change?

Thank you for good vdo!!! I have some question about upgrade v.2 to evo. Can we change only; - Rotor head + blade - Main Shaft (Old Motor) - Tail Motor - Tail Boom In your vdo, you also mention about "frame" upgrade. So, I don't sure that frame must be upgraded or not?. Or we can use original from v.2? Another question is can we change only main shaft and use v.2 motor? Thank you so much : )

Everytime you say Helicopter I do shots!

Awesome heli. Whats the kv of the main motor?

😂 finish video very nice

Do you know if the radio master TRANSMITTER works with all omp helicopters Old M1 M2 v2 & Explorer (futaba rx & dsmx control unit etc) all rx controller versions please

I just got mine yesterday and have watched a few videos. Have not tried to fly it yet. One of the things I have not seen (forgive me if it was shown and I was just too thick to get it) How do you charge the battery? I do not see a charger with the heli? Thanks!

Hello, Jonas thank you for everything you do. you are very helpful. I have a quick question... Will it be okay to fly my first Gen OMP M1 with your M1 Evo zorro setup or will I have to change any of the pitch setting or anything else?

Hi Jonas, I'm new to this hobby. I bought a M1 EVO and a M2 EVO. I have a question about the gains. If I set the gyro gain higher does that mean it stabilizes more? Thanks in advance for your answer. And please keep making this kind of video's.

Which Zorro for Blade helis ? The 4in1 ? Thx

Quick question, I want to get myself the Zorro max controler, will this work with my omp1 and will i need a reciever for it? thanks Jonas.

What size torx do I need to remove the main shaft from the motor?

When Jonas says you can use the longer evo blades on the v2 you have to make adjustments to the FBL. What adjustment do you have to do? I would like to put my v2 into a 250 size md500 fuselage and use the evo blades if I can. Thank you for any help I can get

Hi Jonas i have something to check with you. I have M1 evo heli right now & im having problem to get the right pitch for the heli, eventhough swashplate & servos are all level. Im using radiomaster pocket. if im in normal mode, i can hover the heli, but its not the same as last time set up. When i am hovering, looks like the pitch is not right...difficult to control, like ball. I hope you can help me on this. Thanks.

Hello Jonas, I'm confused about your Setup and Config in terms of an OMPHobby M1/M2 Evo and Zorro 4in1 RTF-Kit. How can I fully and correctly implement your Model Files into a RTF Zorro 4in1? Do I still have to buy and attach an external Satellite Receiver to run your Model-Setup to overstep the OMP Protocol limitation ? Because you mentioned 2 times the following statement ("Choose the correct setup file for your receiver type. Simply changing the receiver type in the radio WILL NOT WORK.") and ("Either SFHSS or DSMX, or modify the setup file accordingly for your preferred Rx. OMP protocol is too limited.") Thank you for your in depth work for the Heli-Community Regards René / Schweiz

How is it to mount other batteries from the V2? Any easy way to use straps or something to hold batteries that might be a little smaller than the 750mah batteries? Is the Cannopy the same, just different colors?

Hello Jonas, question for ya.. what size driver is need to remove the main shaft bolt from the motor? 1.5mm is too small and 2mm is too big on mine.

Hi Jonas What’s difference between m2 evo and expo?

hi good job, but no link in description. ont omp website not have the evo , just the m2

Hi, auf dem Omphobby Lipo gibt es keine Angabe zur max Laderate....mit wieviel C kann er geladen werden? Danke und Gruss, Stefan

Did it get any damage at the end? :)

When can we expect the M1 EVO?

I'm really confused on the binding process, I am very new! I have a Spektrum NX8, and I need some sort of RX that has a DSXM port? I don't understand this and don't know what to buy so I can bind it up. I read a lot that there are some sat's that have a bind button, but they are sold out everywhere. So can you help?

M2 EVO is the best helicopter. But couldn't they have made Bluetooth for tuning? Sticks are like the last century. Very inconvenient.

I have one question will the new evo would it bind with my OMP hobby T6 transmitter???

Jonas, can I use tail boom of M2 V2(exp) on Evo? Thank you

Hi Jonas, I have a question. Some users are claiming that the evo lacks power compared to the s2, and that the power drops after 2 minutes of flying. Do you have time to prove it's true?

do the M2 V2 feathering shafts and servo horns work with the M2 evo ?

Why did they make apps? There are m1, m2 evo. But how?

jonas do i need to buy the futaba sat to use ur setup?

Awesome! =^/,..,^= Now, I know what parts to get, to put together as an upgrade kit for my OMPHOBBY M2 V2. Just an idea: Perhaps OMPHOBBY themselves could do an M2 EVO upgrade kit for those that want to upgrade their M2 helicopters.

Hallo Jonas, du erwähnst im Video, das man die neuen Hauptrotorblätter auch auf dem M2 Explore nutzen kann, aber dafür das FBL-System anpassen muss. Kannst du eventuell die anzupassenden Werte nennen und deren Änderung. Des Weiteren ist die Frage, wohin man dann die Gaskurven am M2 Explore verschieben sollte? Könntest du hierzu bitte eine Information geben? Gruß von einem MFC Coburg - Fan

Can't wait to get one but at this time it's all out of stock 😭😭

Anybody know how I could use my Paladin EV with this. Noob here!

Hey Jonas 😊, ich habe mir einen OMPHobby M1 gegönnt, und wollte dem dann diesen Rescue Mode ( für 3 verschiedene Kopfdrehzahlen) gemäß deinen Angaben programmieren… das Problem ist, obwohl ich das , denke ich zumindest, so gemacht habe , wie in deinem Video, geht der Fc, wenn ich den Rescue-Schalter ziehe ins Selfleveling, danach zeitgleich auf die passende Drehzahl zum Flightmode,erst wenn ich dann den Rescue-Schalter loslasse, kommt die Verzögerung… die muss ja unbedingt nach dem Selfleveling kommen! Alleine lt Kanal-Monitoring kann man schon sehen, das ich hier irgendwo einen Fehler drin habe, ich weiß nur nicht wo… habe da jetzt echt lange versucht, den Fehler zu finden … Hast du vielleicht eine Idee? Habe übrigens einen externen passenden DSMX Satellit verbaut! L G Erik

pika pika

Just once I want to see a video of an unboxing and maiden flight where it SLAMS into the ground just hovering like mine did. Every single review ends in some kind of professional stunt flying making it look like its less than impossible to fly.

Cannot see this video. It won't load. but all your other videos work fine. Waste an hour trying to watch it. Pain the ass.

i think the helicopter with the servo geometry like a Blade CFX or Fusion or Goblin would be much better.. ich miss this by this helicopter...

Acheter pour moi

You are visually impaired, so how can you control this machine without crashing???