One of my axes made it into a Puisheen video....somebody pinch me. Mike breathed so much life into this beautiful guitar, it's truly incredible.

Ima simple man. Mike posts an offset video, and I watch.

Thanks for another amazing walkthrough and demo! I’d love to see a video where you directly compare a Jaguar and Jazzmaster tonally, and maybe offer insight about what you think the strengths of each are and where they each respectively shine. I know there are plenty of videos out there doing this, but I know you’d do it best 😊

The voice-over work, at times, vaguely reminds of Patrick Bateman describing his morning routine. I dig it.

Outro Jam has some True Romance Theme song (You're So Cool) vibes. Love it

Your channel is so underrated you deserve more subscribers

Always a good day when I hear from my old pal Voice Over Mike. Glad to hear that you’ve been busy. I had no doubts that someone as skilled, knowledgeable, kind, and hard working as you would land on their feet.

Incredible! What a guitar. I can only imagine the owner’s face upon seeing it for first time after being brought back to life.

cant beat a 60s sunburst🔥

What a beauty and she sounds purdy too! Love that outro jam you played 👌❤

Beautiful playing and gorgeous guitar after your cleanup!

This is still my favorite genre of KZfaq video. A guy working on a guitar.

I decided that I’m going to dip my toe into the offset world, and subsequently found your channel. Over the past few days I’ve watched soo many of your videos, and I sincerely thank you for the knowledge that you share. I’m going to a relatively local store next week and trying out a CV 60s JM lefty that they are getting in from their warehouse. I like it I buy it, safe now in the knowledge that I have received from your good self that I can get it playing beautifully with the correct setup. Thanks.

Super beautiful Jag!! Sounds amazing too. Too bad we didn't get to hear the neck pickup in lead circuit I have 08 MIJ with Antiquity IIs and CTS pots and Mustang saddles. Sunburst, black pickguard, black pickup covers, tremolo arm tip and so on. I love my Jag, but also all the Jags.

My morning just made better with a new Mike Adams video, keep up the great work Mike love your content

I love the muted sound of Jags, but I hate how the mute makes the strings go slightly sharp when engaged. Even with minimal pressure and correct mute adjustment they still go a bit sharp, because the vibrating length of the string has been slightly reduced. So on my own Jag, I repurposed the trem lock to fix the tuning when the mute is engaged. The trem lock is set to push the trem down ever so slightly, so when I flip the mute on I also engage the lock and it stays in tune.

such a sweet outro song honoring the time honored age of the instrument.

Very nice guitar and very nice video sir. Thanks.

Man the depth comes right back to that lacquer after the car polish and so much about this guitar is absolutely gorgeous but sometimes i just fuckin hate sunbursts... every once in a while instead of looking like a gradient of color it just ends up looking like 3 separate colors

Loved watching you breathe new life into this beautiful Jag, Mike. I can't believe how it turned out, it looks amazing! Nice tasty, heartfelt playing too! 👍

Man did I miss these videos with guitar repair/ setup. Love it.

Yes

60 years old! Hear it go!!!

Always super relaxing and calming seeing you do your thang on a nice Jag ❤

I just love watching your enthusiasm for these instruments !

I hear that you met Ted from Ontario while in Chicago. Very cool. Red Bear summit.

that's one the perks of being american. the slight chance that one day you may inherit such a wonderful old gem of a guitar with all the stories and family blood running through it. that ancestral connection one feels playing such instrument must be unimaginable. wonderful job

Great job! Nice to see you back, too!

Appreciate you putting this out. Welcome back mike!

Fine work as always.

Great video, Mike! I love these kinds of videos from you - I first found your channel during the early days of the pandemic when you were putting out a lot of these in PA. I feel like I've learned a lot about guitar restoration from your channel, and would love to see many more like this. Your channel inspired me to get my old '64 (I think! Haven't checked the pickups) Jag looked into a few years ago and I wish you lived on the east coast so I could get you to take care of it for me versus the guy I chose who did nothing to fix its problems. :(

Beautiful Jag ❤

You are a true artist and craftsman!!!

idea: list dirty rags on Reverb as preloaded mojo applicators 😅

Wow, that's nice! My '64 Jag needs to meet you!

Love this vid!!!!! At the shop where I work, we have a 1966 Jaguar on consignment right now, and it is a honey of a guitar! It has a larger neck than most vintage Jags that I have played, and I love it. I don’t have the funds to buy it myself, but it is nice to have it in the shop. :) I’ll have to continue to be happy with my 90’s MIJ Jag. :) Thanks for continuing to help us all learn to care for our offsets!

Great video as ever, Mike. And what a beautiful guitar! All the best from sunny Edinburgh 🏴󠁧󠁢󠁳󠁣󠁴󠁿

I'm sitting here with my perfectly awesome Jazzmaster, and a bad case of Jaguar envy. ;) Great video and beautiful guitar.

Great job!

Amazing! As always 🙌⚡⚡⚡

Thanks for Sharing Mike 🎸 🎶 💪

That sounds excellent.

You have a really great speaking voice, FWIW.

oh wow that tone at the end. be still my beating heart.

I have the same 64 Jag guitar, they are works of art. I respect your opinion on mojo, but I’m leaving mine intact. Just cleaned up frets a little, lemon oil the finger board, still need to replace dead mute foam though.🤙🏽🤙🏽🤘🏽🤘🏽🙏🙏great channel btw!

Love this!!!!!!!! i own a 1964 as well!!!! and this gives ideas!!!!!!!!!!!! thank you

Coffee and an Offset video, good times!

Nothing cooler than clay dots, Mikey boy!

i saw the Sunburst and had a smooth brain moment as i panicked thinking “wait, Pancake is a Jazzmaster, right?”. I think when i think of you, the coke bottle and charcoal frost metallic Jags come to mind now first and foremost.

Love Mike and his channel. Now, sell me that bad boy 😊

HELL YA

Great video once again Mike. That is what a Jaguar should sound like; punchy, focused and with plenty of mids. Those original flat pole pickups hold magic that Fender is yet to replicate in their reissues. Have you come across any boutique winders that get close to those early Jaguar pickups' sound?

Great video! Would love to hear what you think of the new Vintera II Jazzmaster!

Excellent video! Did you need to do anything to the wood where the water damage was present (e.g. to prevent mold/rotting)?

You should do a book on setting up Jaguars properly !

Mike I would like to see your take on the G&L Doheny since it's an offset guitar that Leo Fender also designed I suppose. Keep up with the good videos!

great video as always. Also, todays the day… new jag/jazz review video on the horizon? 😇

You ARE the Adam Savage of guitar tube. :)

Baby wipes and Deep Woods Off (sorry for brands) get almost anything without damage (still rely on a test spot though).

Sounds thicker and fuller than a Jaguar is legally allowed to :)

Wow, amazing work with the case! Wait, there's a longer version on Patreon? I didn't get a notifcation...ooh 32 minutes!

Sounds great (as always!) 😁 A mute question: do you often have mutes that actuate as easily as that? I've tried fitting one both to a body that was pre-drilled for the mute and one where I drilled the holes myself, and with both, the 'switching' is stiff and doesn't fully engage in either position sometimes. Any rookie mistakes I'm likely making or reccomended tweaks to the mute parts? I've tried tightening it down low and that makes it quite stiff. Any higher and it interacts with the bridge itself which can't be good for keeping intonation. Using slight neck shims to allow for proper bridge height too!

Great job, Mike. Looking forward to the next one!

Voice over mike , reminiscent of the WonderYears in vibe

Dude. This is wild. I came by your channel last night, after thinking you hadn't uploaded a video in a while. I was wondering if I might have missed an upload. Now here you are today, my favorite offset aficionado, working on my favorite guitar. What a gift! BTW, I string my Jags w/Burly Slinkys too. Great strings for the short scales!

Kicking my ass for selling my '64 Fender Jag for $75 for books for Tech school back in '69 . . . ARRGHH ! This included a tweed style HS case . . .

@7.40 all I could think was "STICKY GLUE FOAM"

youre infectious mood and expert guitar work always brightens up this trans girl’s usually tough days, thank you mike!!

Hey Mike!!! Greetings from Greece! I love all the stuff you've been doing and you' re great guitar tech and guitar player. But i would like to ask you about two things..First my AVRI '62 needs a refret and i want to put some medium jumbo frets. What are the best options that i have according to you? And second i would like to know how can i get one of those t-shirts that you're wearing in this video? Thank you man!

Hi Mike !! Love your videos !!! ❤❤❤Have you played the Squier Classic Vibe 60 Jazguar Charcoal Frost Metallic??? Is a very good-looking Jaguar but I'm not sure about the rest....could you give me some advice please?? Many thanks and greetings from Barcelona !!! 😀😀😀

Hey Mike, have you gotten your hands on any of the new offset Vintera II's? I would love to see your thoughts on them, especially the Bass VI and Jazzmaster.

I went to upvote at the end of the video and realized i had already upvoted. My bad.

Hey Mike, I have a very similar '63 (literally down to the shorted neck pickup). It plays decent as it is, could use some new frets, BUT the real issue is that the truss rod no longer offers any additional relief at it's loosest setting. Any recommendations to remedy this? Does it need to be heat pressed?

Hi Mike, I was wondering if you could help me figure out what mastery vibrato and bridge I should use for the squire 50th anniversary jazzmaster. I think I saw you put some on one at some point. I live in Dallas, and I don't know of any offset techs around. Everywhere around, here is geared up for country players and their guitars. I'm a shoegaze, noise guitar type player, so that sort of leaves me in a bit of a pickel. Great video, as ever, by the way.

Hey puisheen, I have a Vintera 60s Jaguar HH and I’m looking to upgrade the pickups. Do you have any suggestions that work with the spin a splits?

very good job! I have a 65 fiesta red too.pu heights suggested? sometimes it sound to me very thin I use 0,10 (I know it's a Jaguar)

Either you changed your mind on treble or that guitar is one of the chimiest I've ever heard. It sounds sparkling.

I think my dad has one of these. If he didnt give it away. I want it so bad.

Hi Mike, I have 1965 jag and I am experiencing the whole circuitry to be somewhat microphonic. It is especially noticeable with drive pedals, and if I use to it goes into a, how to put it, “phase kinda feedback”? It is noticeable even with clean sounds. When I tap the body, neck, pickguard, control plates, even the strap buttons, you name it, the pickups simply pick it up. I’ve seen the foam under the pickups, it is all hardened and deformed, do you think it could be caused by it? It is manageable but pretty annoying especially with the gain… thanks so much!

I’m curious to know if Jaguar pickups can handle more drive or distortion than the ones on a Jazzmaster. Love the Jaguar but hate 60 cycle hum.

That mute 🤤

Hey Mike! I have a 1964 Jaguar with really bad backbow on the neck tried to twiset the truss rod screw but nothing happens 😭 any tips can I send it out to you haha

Between this video and your Johnny Marr one, I'm starting to wonder if I need a Jag...

Mr Puisheen, Silly question: is it possible to use the switches and wiring from a Jaguar on a Jazzmaster? Of course, I’m considering some delicate modifications to the Jazzmaster pick guard, to accommodate the switch plates from the Jaguar. What say you?

Hey Mike! If I can, I would like to pick your brain for a minute. I have a Squier CV 60’s Jazzmaster that I’m looking to replace the pickups on. (Fender CuNfie cobalt Jazzmaster set) looking inside, the guts are leaving little to desire. Do you know of a vintage style pre-wiring harness that you would recommend? And what the best pots would match these pickups? Also have you had any issues switching out the Squier neck with a fender neck? Again thanks for your time! (I know your a busy man) 🤘🏼🤙🏼

Hey Mike great video! I just bought an old Gibson from a Smoker x) do you think I can get get rid of that smelly tar sh** on it with naphtah ?(its a nitro-finish)

hello puisheen i love you

Hey Mike, Have you ever seen a C or D width neck? I'd love to play one of each to try em out. My 62 Strat is a B which seems to be what 90% of fenders came with. But I I know you love them SKINNY NUTS!

I'm of the opinion that mojo is honest wear rather than grime.

At this very moment my daughter is on her way to Seattle to start her new job there. Guess which guitar shop I plan on dropping in on when I go to visit her?

Hey Mike, do you have any opinions about the vintera jazzmaster and jaguar HH mod? I watched some videos on KZfaq but nothing as technical and clarifying as yours. Thanks :)

Do you think you have the chance to review the new Rivera 2 ?

i have an identical 63 jag in identical condition - now you have me curious to check the pickups.. mute is gone LONG ago - is it worth finding a mute to add?

Holy hell. I wonder how much it would cost to get this work done??

Hi, what if i just bought a JM and when I use the tremolo, the bridge doesn’t rock a lot like the ones in your videos?

the naptha don't mess with the finish on neck/body?

Thanks voiceover Mike!

you didnt have to file the nut when the thicker strings??? i thinking of taking my jagstang from 10- 46 to the 10-52

Can i clean my 63 jag with that stuff the build up on mine is covering the finish. its much worse. its like a layer of gunk. The finish on the jaguar is also not as clean as this one. Very fragile kinda scared to rub finish off. Thanks t

What did you do to that neck pickup cover?