Mini Cooper S Front Wheel Bearing & Inner Drive Shaft Boot Pt2

Рет қаралды 15,113

7 жыл бұрын

Here we go for Part 2 of the Mini Cooper S Front Wheel Bearing & Inner Drive Shaft Boot replacement....Lets get this job wrapped up.
Music by Joakim Karud
/ joakimkarud
Please watch the other videos on our channel. / oneauto
and subscribe to keep up to date with the latest uploads.
This video is for entertainment purposes only.
My Amazon shop is now open where I have shared the tools I use in my videos and other cool stuff I can recommend.
amazon.co.uk/shop/oneauto
(I make a very small commission from anything purchased)
Thanks for your support!!
Instagram: @oneauto.youtube
/ oneautogarage
ko-fi.com/oneauto

Пікірлер: 71

@simonlloyd7557 3 жыл бұрын

Thrilling. This should be on Netflix. Great vid..No stupid background music, ego trips, or daft editing..just good content. This has motivated me to round off more bolts and hit things with hammers. Thank you.

@ianwatkins5880 Жыл бұрын

Hello Sir, i've just found these 2 videos and i think they are the Dog's, damed good. I'm retired now and just got a mini, after 15 years without a car. It's so good to see a PRO at work AND see the way around thing's that don't alway's go the way they should. As i say bloody great. CHEER'S man. It's time to get some more tool's and start working on it. Thank's for that, time to get of my off my arse and do stuff again. THANK YOU...From a old electro/mech engineer...

@OneAuto Жыл бұрын

Lol cheers! Best of luck

@ianwatkins5880 Жыл бұрын

@@OneAuto Thank's fella, just put in a headlight HAHO. Next is a pair of front drop link's. It's time to try out my new trolly jack and stand's plus some new shiney spanner's and socket set. Your site is a lot better for me than a lot of pill's to get started again.I've got a lot of vids to watch now. Thank's very much and keep them coming. ATB.

@paulajones3856 7 жыл бұрын

UK and US rust look very similar haha. Job security for all of us. Thanks for showing your techniques. Enjoy your videos very much. Take Care.

@OneAuto 7 жыл бұрын

Haha yes very similar. I'm glad you enjoy them. Thank you 😊

@normansmith7806 7 жыл бұрын

Went back together a lot easier than it came apart ! Good work Rob !

@OneAuto 7 жыл бұрын

Yea once its stripped thats the hard work done. Cheers Norm 👍

@wyattoneable 6 жыл бұрын

I'm getting here late but good thing about videos is they're always here. Nice tidy work there Rob. The customer is happy I'm sure.

@OneAuto 6 жыл бұрын

Nobody late here Wyatt, this party still pumping. Cheers buddy 🍻

@125sm3 7 жыл бұрын

Great job Rob, bet you were glad to see the back of that job. Roll on the next.

@OneAuto 7 жыл бұрын

It's a challenging little car that one

@paulmayou370 7 жыл бұрын

great job on part 2 heres to the next

@spelunkerd 6 жыл бұрын

When I started fixing cars I thought I'd end up doing a lot of these, I even bought the crimping tool about 20 years ago. It turned out I didn't get much of a chance, the economy turned and the cost for aftermarket axles fell dramatically. You made this job look professional and easy. Well done!

@lennonpolo 6 жыл бұрын

I've been subscribed to yo for years!

@321357w 6 жыл бұрын

Both good videos and excellent to show what winter corrosion you get in the UK from the gritters and how the ruddy bolts can be a task to remove.

@stuzman52 7 жыл бұрын

Great job Rob! I'm glad to see that you were using the correct tool on the bands. You would be surprised how many people on KZfaq will just take a hammer and bash it over. 😀👍

@OneAuto 7 жыл бұрын

Those bands are so much easier using the correct tool. Thanks Terry 👍

@castrolgtx5064 7 жыл бұрын

Useful video rob thanks for sharing 👍

@themechanic6117 6 жыл бұрын

That driving on the left side of the road still freaks me out 😂🍻

@OneAuto 6 жыл бұрын

I don’t advise you try it Jonathan 🤣

@djr3485 7 жыл бұрын

Good to see you using a torque wrench Rob. Not many mechanics do!

@SteveRobReviews 7 жыл бұрын

Them cv boot pinchers sure brought back some memories. LOL Nicely done mate.

@OneAuto 7 жыл бұрын

😂😂😂😂😂😂 After I showed them I thought that! Cheers Steve 🍻

@Krillekris 7 жыл бұрын

Proper job. Didn't know that shops still changed the boot these days, I thought they only replaced the drive shaft. Did a CV boot on my mothers car this summer, took some time but was not that difficult.

@OneAuto 7 жыл бұрын

Thank you 👍

@tomparkin1551 Жыл бұрын

Really helpfull, thank you !

@ozzstars_cars 7 жыл бұрын

Nice job, rolling down the road again

@OneAuto 7 жыл бұрын

Thanks Glen 👍

@brendanbradyfan3589 7 жыл бұрын

I think you are a good and capable mechanic I would trust you with my car knowing what you are doing top videos

@OneAuto 7 жыл бұрын

Thank you sir 👍

@clivearrowsmith7918 Жыл бұрын

Great video

@tealyt6 5 жыл бұрын

Good vid bud was making acid at one point cheers Trev

@ianhutcheon9424 Жыл бұрын

Great videos

@vdubs6068 7 жыл бұрын

Great vid Rob Cheers Jamie

@theeviloneohyes 7 жыл бұрын

yay , part 2 ...

@tigermoth3194 7 жыл бұрын

Nice to see your patience and perseverance with those crusty bolt heads, Rob. If I did these 'How to' vids they'd be full of 'bleeps' and would have to be viewed after the watershed........

@OneAuto 7 жыл бұрын

HaHa, thats the beauty of editing 😜

@zedman442 6 жыл бұрын

Nice one. For inner boots I've taken the outer CV joint off instead as they are sometimes much easier to get off than the inner joint, then slid the boot up to the inner joint. Also cheated a couple of times with stretch boots for outer, seem to be holding up!

@OneAuto 6 жыл бұрын

Zed Man Sure that's the other option. Stretch boots are good for getting you out of a pickle sometimes.

@simonrawle7885 7 жыл бұрын

Good job getting the abs scenser out. And that is one good old vice getting harder and harder to fined the old British made ones

@OneAuto 7 жыл бұрын

It's a great vice. Proper solid. Cheers Simon 👍

@BernieCarter1976 7 жыл бұрын

Great video thanks Rob

@OneAuto 7 жыл бұрын

Cheers Bernie 👍

@haywardsautomotive6156 7 жыл бұрын

Nice video series Rob!

@OneAuto 7 жыл бұрын

Thanks buddy!

@bzandpm 3 жыл бұрын

EXCELLENT !

@bodgitandleggitgarage 7 жыл бұрын

Nice job mate surprising you didn't use your tile nibblers lol

@OneAuto 7 жыл бұрын

I lost them when I was castrating the cattle 🐮 😂

@warwickdean 6 жыл бұрын

Was there a long spring on the inner CV housing at all?

@andrewthompsonuk1 7 жыл бұрын

Great video. Were those the correct torque to yield bolts? I can see you only went as hard as you dared to with a 13 mm socket. Personally I think normal bolts are stronger

@OneAuto 7 жыл бұрын

Brand new bolts that came with the brand new wheel bearing assembly.

@robtaylor4462 7 жыл бұрын

hi rob, what is the silicone grease you use? do you use that on brake sliders on calipers too?

@OneAuto 7 жыл бұрын

Any silicone grease.. it's all the same. Yes same as the brake sliders

@gasguzzler5551 7 жыл бұрын

Nice video Rob, did you end up putting a cable tie on that inner CV boot ;)

@OneAuto 7 жыл бұрын

Haha no, I keep them in stock. I had it in my hand @ 8:41 😃

@gasguzzler5551 7 жыл бұрын

Must have missed that bit of 'slight of hand; Rob :)

@raduflorian7037 7 жыл бұрын

Hi rob, haven't told us factory torque specs...are they secret??? Anyways good job...cheers

@OneAuto 7 жыл бұрын

Top secret 😄

@jianni388 3 жыл бұрын

Where can I get that boot!?!?!?!

@jianni388 3 жыл бұрын

I can't find it to save my life

@TheMcooper17 7 жыл бұрын

job done happy boy, andd £250 in the back pocket eh? people tend to forget why it costs soo much. brand new parts and labour and heating anf electric

@armunro 6 жыл бұрын

Nice job. Can't think why ppl buy minis; alot of money for a small car and not much subframe at the front. No front fenders to protect you too.

@theeviloneohyes 7 жыл бұрын

just need a video now on removing gearbox on 1.9 tdi ford galaxy 2005 .... hehehehehehehe

@shanekneeshaw3483 7 жыл бұрын

radio control uk good luck is there any on the road still haha

@theeviloneohyes 7 жыл бұрын

there are plenty , they fetch resonable money too if they in good nick

@gasguzzler5551 7 жыл бұрын

Just a thought Rob.... have you ever used these replacement boots... what are your thoughts ? kzfaq.info/get/bejne/n7KierGGxNqcY40.html

@OneAuto 7 жыл бұрын

I once tried to use one years ago...it ended up in the dumpster.