Onewheel Firmware Modification: Improve Performance of Your GT & Pint
Рет қаралды 20,342
10 ай бұрынIn this walkthrough by Justin of FixMyPEV, we'll dive directly into the world of Onewheel firmware modification. Discover how to unlock the full potential of your Onewheel GT or Pint using a free firmware modification app available on the internet. Get ready to elevate your Onewheel experience to new heights!
IMPORTANT: FixMyPEV is not associated with the app or project outlined in this video; we're sharing this information purely for educational purposes. Complete the demonstrated process at your own risk.
Note: This process is not compatible with firmware version Cassiopeia - 6153+ or Gemini - 5100+*.
* If you are running Gemini - 5100 firmware on your Onewheel Pint (at/below 5314 hardware) or Pint X (at/below 7323 hardware), a new unlock process is now available: • Downgrading Onewheel P...
--
App - autumn-bar-0505.on.fleek.co
Guide - www.fixmypev.com/diy/onewheel...
--
Want to buy Justin a coffee? Follow the link below:
www.fixmypev.com/contributors...
--
DID YOU KNOW? - You can use code 'FIXMYPEV' for 5% off at thefloatlife.com/fixmypev
@fixmypev 3 ай бұрын
If you are running Gemini - 5100 firmware on your Onewheel Pint (at/below 5314 hardware) or Pint X (at/below 7323 hardware), a new unlock process is now available: kzfaq.info/get/bejne/obNxZtFylr_Rm5s.htmlsi=d0CNUFPsibSHq3iZ
@tmbottegal 9 ай бұрын
I just wanted to say that this was my first time doing this. Not only was the guide indispensable, your anecdotes and riffing during the flashing really helped my nerves lol
@fixmypev 9 ай бұрын
Glad you found the video helpful! And entertaining. Haha. 🤙🏼⚡️🖤
@daole2244 9 ай бұрын
I’ve tried this on chrome on my laptop and keep getting Messages “this site can’t provide a secure connection”. Whenever I click on the 3rd link OTA files pint/gt & firmware
@fixmypev 3 ай бұрын
Oops. Just saw this reply. Have you been able to figure this out yet? It’s due to network and browser security settings.
@emanuelgalvan4152 2 ай бұрын
@@fixmypev yo bro so if i’m correct u basically modding the board too do things that i didn’t know that can do🫨
@fixmypev 2 ай бұрын
@@emanuelgalvan4152 That's correct! 🤙🏼⚡🛠
@dinoguan 10 ай бұрын
Just got back from test ride (with helmet) after re-leveling for WTF rails. Ear to ear smile thanks to you and your guide. Much love. This community is amazing.
@fixmypev 10 ай бұрын
Love it! Way to put safety first. Glad to hear you’re enjoying the new features! 🤙🏼⚡️🖤
@scottomotive 10 ай бұрын
Nice work! I hope this video takes off. Going to be a huge help and such a great tool for the community.
@fixmypev 10 ай бұрын
Thanks, Scott! Hoping this helps as many people as possible.
@sorinblack 9 ай бұрын
Dude, you're are the patron saint of the onewheel! Thank you for all you do
@kortland12 5 ай бұрын
Guide still holds up and doing strong. Pint rider here, thanks for saving my board! Bye bye handshake!
@tysj 5 ай бұрын
Thank you so much! This was such a pleasant walkthrough to follow and got me through my first patch without a hitch
@brycestrife5605 8 ай бұрын
I never was planning on doing this to my pint, but its very interesting to have in the memory bank haha, cheers to sharing woth the community 👍 🤙🤙🤙
@angelcordomar4848 10 ай бұрын
Hey Justin! Great job, buddy! I finally have the Pint I always wanted, all thanks to you. I've had the local version for a while, but I didn't dare try it until I saw your video. Thanks a bunch, man! Now it's incredible. Goodbye to pushbacks!! Hehehe.
@fixmypev 10 ай бұрын
You're welcome! Glad to hear you enjoy it! Ride safe! 🤙🏼⚡💯
@calt2057 9 ай бұрын
Appreciate the random quips from you while flashing in tandem with the video. Much nicer than sitting in silence while it flashes so thank you.
@fixmypev 8 ай бұрын
Glad you like them! 😂
@rhamnuselaiaadventures6464 9 ай бұрын
Thank you so much for taking the time to make this information available.
@M16papercraft Ай бұрын
thank you so much for this guide and for the help on the discord! can confirm that this worked perfectly today for me. didnt even know about the posi patch, what a lifesaver. again, ty for (re?)developing this for the community man, we're all very appreciative.
@fixmypev Ай бұрын
You’re welcome! And I didn’t develop the tool, but it’s definitely one I see a ton of value in and use regularly.
@jeansonto6304 3 ай бұрын
One of the best guides I have seen on KZfaq in a very long time
@fixmypev 3 ай бұрын
Thanks for the kind words! 🤙🏼⚡️🖤
@rikelm8381 10 ай бұрын
We were just talking about rewheeling last night! Did a pint this morning and worked beautifully. Thank you! Enjoy your coffee 😉
@fixmypev 10 ай бұрын
I appreciate the support! Thank you. Ride safe! 🤙🏼⚡️🖤
@jadentalks5068 8 ай бұрын
Are there any differences that you can you feel after doing that. If so pls let me know??
@fixmypev 8 ай бұрын
@@jadentalks5068 The differences can be felt immediately! But don't take our word for it. Here's TFL's review: kzfaq.info/get/bejne/fMWmfcekz9_cimg.htmlsi=UZpdsEC9er5n6XbE
@Brausmith 5 ай бұрын
Thank you. Successfully did this for the first time, on my Pint.
@fixmypev 3 ай бұрын
Awesome! How's it been riding?
@slothsride7556 10 ай бұрын
Thanks for this video. I was just telling a buddy about rewheeling and told him there was a KZfaq video, but it had been taken down. So thankkkkkkkk you
@fixmypev 10 ай бұрын
You’re welcome! Enjoy. 🤙🏼⚡️🛠️
@kapibike 6 ай бұрын
I don’t use the word hero often. You sir, are the greatest hero in American history!
@fixmypev 5 ай бұрын
Thank you for your support! That means a lot! 🤙🏼⚡️🖤
@DarrenAttew 10 ай бұрын
Legendary Justin!!! 😎 Thanks a bunch man! I've been holding this off due to nobody knowing how to do it locally. This clears it all up for me with the procedure. It is so much easier seeing it done, rather than reading the process. Great work dude! 🤙I can't wait to get mine done now! 😝
@fixmypev 10 ай бұрын
You’re welcome, Darren! If you have any questions, don’t hesitate to reach out. www.fixmypev.com/contact-us
@DarrenAttew 10 ай бұрын
@fixmypev I will buddy, I haven't got my board at the moment as I'm going to the OWAT event. It's being transported to the event by van with a friend. I'll see if I can do it before the race, if not when I get back! Is it advisable if I do it on an android phone when I'm there, or better to do it via a laptop when I'm back?
@fixmypev 10 ай бұрын
@@DarrenAttew You can 100% do it on an Android phone. I’ve done it many times. Works just as well.
@DarrenAttew 10 ай бұрын
@fixmypev Awesome bro! Thanks for the info. I'll do it before the race then! 🤙🤙🤙
@fixmypev 10 ай бұрын
@@DarrenAttew Sounds good! As long as it's not frowned upon. Haha.
@susanacamberos5898 7 ай бұрын
Justin was amazing help; my board works again!!!! I can ride again!!!
@fixmypev 5 ай бұрын
Thank you, Susana! Appreciate and miss you guys! 🤙🏼⚡️🖤
@frivilisfilms 10 ай бұрын
This is him!!!!! Just hit 21mph on my pint. Right on for sharing the knowledge!!!
@christopherborawski9202 10 ай бұрын
This mod is game changing I’m averaging between 18 and 20 on my pint and my battery percentage is correct with custom shaping!
@SKUNKHERO4EVER 10 ай бұрын
no modet bat ? what number you use for speed ?
@gilbertsusbilla3964 10 ай бұрын
Aye brother!!! Good morning! I just wanna thank you for this I just done this update on my Pint and I can go 20 MPH with no push back at all 🙌🏼🙏🏻
@fixmypev 10 ай бұрын
You're welcome! Glad you were able to level up your riding experience! Ride safe out there! 🤙🏼⚡💯
@SKUNKHERO4EVER 10 ай бұрын
with OG pint ? what number you set for speed?
@fixmypev 10 ай бұрын
@@SKUNKHERO4EVER It's ultimately a personal decision and/or preference so don't consider this advice, but I set mine to match the Pint X (1462).
@averycolburn 6 ай бұрын
Worked a treat. After getting my pint and wanting an upgraded battery, then seeing rewheel was nixed, I was afraid I was out of luck. Your real time step-by-step was a lifesaver. Thank you!
@alibabarouge 6 ай бұрын
I am also a new pint owner :) but it’s a second hand. What does it do exactly pls?
@averycolburn 6 ай бұрын
@@alibabarouge This video walks you through how to downgrade the firmware to 5040, before FM implemented a bunch of errors and shutdowns to keep people from modifying their boards. For me, this firmware downgrade will let me install a second battery on the fender to triple my pint's range for $200, instead of having to buy a longer range board like a GT.
@rdcrdc8527 5 ай бұрын
Does it work for a new pint. I got a new one with firmware 5100 but I'd love to be able to upgrade my battery but seems like if you got 5100 there's no work around out there yet
@fixmypev 5 ай бұрын
Unfortunately, no. Per the description of this video: “Note: This process is not compatible with firmware version Cassiopeia - 6153+ or Gemini - 5100+.”
@ashtonbrown4318 9 ай бұрын
Thanks to you, it feels like I actually own my board now!
@fixmypev 9 ай бұрын
Love it! Feels great, doesn't it? 🤙🏼⚡🖤
@GizmosPB 10 ай бұрын
Thanks Justin for the great video!
@fixmypev 10 ай бұрын
You’re welcome! 🤙🏼⚡️🛠️
@SolisCreative 10 ай бұрын
Fire, did my pint a few weeks ago and I love XR app and shaping plus GT pushback, battery upgrade soon
@fixmypev 10 ай бұрын
Glad you’re enjoying it! This is a great tool. Really levels up the riding experience. 🤙🏼⚡️💯
@MattKeithley Ай бұрын
i have always had ride anxiety on my OG pint knowing that pushback was going to kick in around 14mph. with this mod i can now confidently and comfortably ride 16-18mph. it makes the world of difference, especially coupled with my chi quart. thanks so much!
@fixmypev Ай бұрын
That’s awesome! I’m glad you were able to make your riding experience more enjoyable using this tool. It’s a great one. And you’re welcome. 🤙🏼⚡️💯
@DockGorilla 10 ай бұрын
This was really easy to follow!!
@fixmypev 10 ай бұрын
Happy to hear that! Enjoy the ride! 🤙🏼⚡️🛠️
@emagrev 9 ай бұрын
My pint feels exciting again. I never knew I could improve the ride of my pint. Feels like a new board.
@fixmypev 9 ай бұрын
Makes the Pint EPIC, doesn’t it? 🤙🏼⚡️💯
@withchristaloneful 9 ай бұрын
I'm a Pint rider myself, I'm curious what did you change? :)
@fixmypev 9 ай бұрын
@@withchristalonefulOn my personal Pint, I added the posi sensor patch, higher pushback threshold, and removed the BLE handshake check (so I can easily use third party apps). But…you can also add custom shaping and even change your ride modes to behave more like the XR ride modes. The full patch list can be viewed online.
@nathanofearthh 10 ай бұрын
Annnd custom shaping comes out the next day hahaha. How wild is that! However, being able to adjust pushback makes this route so much better imo. Sweet video man!
@sp1d3 10 ай бұрын
So we have to choose? Is the update avoidable
@fixmypev 10 ай бұрын
Right?? Haha. The odds...It's a great time to be alive. 🤙🏼⚡💯
@fixmypev 10 ай бұрын
@@sp1d3 The update is avoidable, but you won't be able to use the Onewheel app unless you update to the new firmware. There may be an alternative app available though. Going through some testing.
@angusofstockholm 4 ай бұрын
You’re a right to repair hero, first class.
@fixmypev 3 ай бұрын
Thanks for the support! Definitely trying to help as much as possible. 🤙🏼⚡️🛠️
@mranonymous4907 7 ай бұрын
OMG it worked!!! Thank you so much. You have some good Karma coming your way. (FM can suck it.)
@djd7421 10 ай бұрын
Awesome video! Thanks!!
@fixmypev 10 ай бұрын
Glad you enjoyed it! Stay safe out there. 🤙🏼⚡️💯
@AbhiKopecky 5 ай бұрын
brother you are a legend. thank you so much
@Darieee 4 ай бұрын
fantastic tutorial .. thanks for taking the time 🤘
@fixmypev 3 ай бұрын
You're welcome! Glad you found it to be beneficial.
@christopherborawski9202 10 ай бұрын
I just saw this around midnight and had to try it out. The increased speed and custom shaping is a game changer. Thank you so much!
@fixmypev 10 ай бұрын
You’re welcome, Christopher! Glad you found this walkthrough helpful. Ride safe! 🤙🏼⚡️💯
@GUDBYE_92 10 ай бұрын
This adds Custom shaping in the OW app? How sensitive is the custom shaping?
@christopherborawski9202 10 ай бұрын
@@GUDBYE_92 It was amazing until i bricked my board while it failed during a flash. Time to VESC now
@christopherborawski9202 10 ай бұрын
@@fixmypev Update so I ended up briking my board during my second flash somehow
@fixmypev 10 ай бұрын
@@GUDBYE_92 Not exactly. Not without a workaround at least. You would have to spoof your board as an XR and also enable custom shaping in order to be able to do it in the app. I don't generally recommend that (because it's a bit too invasive in my opinion), but it's up to each individual rider what they would like to do. If you decide not to spoof as an XR, you can still access custom shaping via the 'Live' tab of the same site I have demonstrated in this video. My advice: Educate yourself thoroughly prior to moving forward with any firmware patches.
@lukaszbielanin 10 ай бұрын
Wow I just came across this today after updating Gt to custom but my board is without buzz. So wish I had this instead of the newest update
@MrJoefoefrombuffalo 10 ай бұрын
Nice! Thank you for posting. Please consider one on the XR.
@fixmypev 10 ай бұрын
You’re welcome! Unfortunately, this process was not developed for the XR prior to the project being halted. It is only compatible with the GT and OG Pint (0:28).
@TattedTommysTv 5 ай бұрын
Brah coming from fpv and they make that stuff were you gotta be a rocket scientist to understand this is the move much respect brother IL be doing on my son's OG pint we were forced to update cause my son got on the app and started through the update so I had to do it but he's only 6 been riding since he was 4 float on brother and pre shade it ...
@fixmypev 5 ай бұрын
Love it! Appreciate your guys’ support! That kid’s growing up right with a father like you. 🤙🏼⚡️🖤
@TattedTommysTv 5 ай бұрын
@@fixmypev man oh man I really appreciate that brother keep the cool stuff coming Float on ...
@sdmods619 10 ай бұрын
Great work!
@fixmypev 10 ай бұрын
Thank you! 🤙🏼⚡️🛠️
@craftcannaconsult 2 ай бұрын
THANK YOU THANK YOU THANK YOU! My pint is fun again
@fixmypev Ай бұрын
You’re welcome! Ride safe. 🤙🏼⚡️💯
@binaryutopia7946 3 ай бұрын
Awesome job
@fixmypev 3 ай бұрын
Thanks! 🤙🏼⚡️🖤
@haymose_ 10 ай бұрын
Thank you. Thank you. Thank you 😄
@fixmypev 9 ай бұрын
You're welcome! 🤙🏼⚡💯
@ohlookeddie 8 ай бұрын
man, this stuff has always seemed so intimidating but you made it so easy to follow and I was able to successfully modify my firmware on the first try - way shorter time than expected! Quick question - if I wanted to change the top speed limit or try different "menu" options for patching, do I need to do anything specific beforehand or can I simply follow the same patch process with different settings?
@fixmypev 5 ай бұрын
Glad this worked out for you! And you can follow the same exact process (I suggest repeating all of the steps for the best/safest results). 🤙🏼⚡️🛠️
@N.East_VESCnOnewheel 10 ай бұрын
I love your videos. Have you started working on how to level a GT with the new firmware
@fixmypev 10 ай бұрын
Thanks for the support! Unfortunately, we're not quite there yet. The BLE commands that were compatible prior to Cassiopeia - 6132 are no longer compatible. The only way we know to level for 6153 is to do so prior to upgrading. That may change in the future, but dust is still settling on everything at this time.
@IkeCoblentz 9 ай бұрын
Hi thanks for the walk-through it was easy to follow. I'm wondering how "remote tilt" and "enable custom shaping" works. Is there a app or website where you can edit the values live?
@fixmypev 8 ай бұрын
Hey! Sorry for the delay. You can access custom shaping and remote tilt either through the Float Remote app (iOS TestFlight) or via the FFMWheel site’s ‘Live’ tab (Android browser).
@siegermarc 7 ай бұрын
FIRST OF ALL, THANKS JUSTIN FOR ALLL OF THIS! great job! I own a ADV pro, a VESC OW+ , 2x OW XR, 2 x OW v1 and since a week a broken cheap OW pint, that received a 21700 15s batpack from me. Now I did the FFMwheel patch accoring to your video! worked perfect,! IS THERE a list where I can translate how may RPM will create pushback at which speed on the pint? I would like to have pushback at 20mph. one more thing, is there a way to read out voltage if I am in "spoof XR" mode?
@fixmypev 5 ай бұрын
From what we’ve gathered, the general equation is 88.965 x MPH = Top Speed Value.
@bleedsblue05esk8 10 ай бұрын
If I already used nRF connect for my board for the Saber Rails will that conflict with using this when getting a larger battery? Thanks for this video!
@fixmypev 10 ай бұрын
No. This should not conflict with that. If it does for any reason, you can use nRF to level again. Or (Pro Tip) you can use Factory Mode on the ‘Live’ tab of this same web app as it includes the BLE connectivity commands. I hope this information helps!
@matthewhale657 10 ай бұрын
Thank you so much just did it on our Pint. Is there a quicker way to go back and change the settings (patches) i just added? I forgot to try to change the pushback setting to be more like XR. Is there a simplified version to do that or just go back through that whole process?
@fixmypev 10 ай бұрын
You’re welcome! Unfortunately, there’s no known way to quickly make micro adjustments to the firmware. You’ll want to complete the process again. Check 7:17 for more info.
@emagrev 9 ай бұрын
Thanks man! I was able to do everything right to get this working on my Pint. I had my Pint since it was first announced. I’m Still rocking the same old tire. It’s flat at this point but I changing it out. Also my battery can only get me about 2 miles on a charge, so I’m changing that out too. I’m really hopping all goes well once I change everything out. I’ve been wondering if I can still charge the new battery with the original onewheel Pint Charger?
@fixmypev 9 ай бұрын
Absolutely! You should definitely be able to. It might take a little longer, but it’ll be perfectly fine to use (we prefer standard charging anyway).
@devinmichaelpruett2791 9 ай бұрын
Ok so I’ve been trying to get the resource tab to actually take me to where I download the firmware. It keeps sending me to an error page
@fixmypev 9 ай бұрын
@@devinmichaelpruett2791 This has happened to a few people and I think it's a security conflict. Have you tried another browser for the download?
@1c2h3i4v5a6s 10 ай бұрын
Awesome video 🔥 I have one question, I already did this whole process to my GT but I will be installing a TLGT battery soon and I need to do the rescale state of charge. Do i need to go through the whole process in order to do it or is there an easier way?
@fixmypev 10 ай бұрын
You will definitely want to go through the process again. There aren’t any real shortcuts. Check 7:17 for more insight.
@1c2h3i4v5a6s 10 ай бұрын
@@fixmypev ok thank you for the reply
@fixmypev 10 ай бұрын
@@1c2h3i4v5a6sYou’re welcome! 🤙🏼⚡️💯
@Cloud1202 10 ай бұрын
Great video, Makes it so I can stop telling people.
@fixmypev 9 ай бұрын
Happy to be able to help! 😂
@GnomoC90 9 ай бұрын
This is really great man! I have a question: at the moment I'm on stock rails but planning to take some katana's at some point. Should I skip the tilt kit for the moment and then re-apply it, or is it better if I put it that already in the firmware?
@fixmypev 9 ай бұрын
Assuming you’re on a GT that has not been updated to Cassiopeia - 6153, I’d recommend skipping the digital tilt for now and applying it once you have the rails. However, if you want to take advantage of some of the firmware patches in the meantime, you certainly can.
@GnomoC90 9 ай бұрын
@@fixmypev yes I'm on a GT and I didn't have updated it yet. I do have updated the app so I wanted to use float remote instead of the official app
@fixmypev 9 ай бұрын
@@GnomoC90 Sounds good!
@md99si 10 ай бұрын
@fixmypev if I were going to install WTF rails, would you suggest leveling first then rewheel?
@fixmypev 10 ай бұрын
The order doesn’t matter, but I’d probably do it afterward just because. It’ll ensure you’re good to go after everything has been updated. Hope this helps.
@AndrewWilde 9 ай бұрын
Is there a write up for the patches that are available and the differences between all of them? Couldn’t find anything in the ReWheel GitHub page. Thanks!
@fixmypev 8 ай бұрын
I don’t know if there’s a writeup, but the descriptions are available under each of the patches on the Patch tab. If you have any questions about the patches, feel free to send us an email at www.fixmypev.com/contact-us.
@heatedgreen94 10 ай бұрын
What if you re level and install WTF rails before you update and something goes wrong with your onewheel? Will FM reset everything to stock if you send it back with stock rails?
@fixmypev 10 ай бұрын
Hard to say honestly. If they replace the controller, there's a good chance the level orientation would be reverted to stock. Otherwise, your setting could potentially be retained. Only FM would know for sure.
@Julian3vil 9 ай бұрын
Thanks for This! Just did it on my pint, everything went fine, but at the very end, Got a red light. Power-cycled twice(just in case) but everything seems fine. FIY the red light was after successfully uploading the new Fw. any way to back up the web app in the case they strike again?
@fixmypev 9 ай бұрын
Not that I know of. The public repo was pulled when the project shut down.
@Julian3vil 9 ай бұрын
What speed do you think I can safely sustain on a pint with 3000km on it? stock battery in good shape. Would be great I could go on centric roads limited to 30kmh (18Mh) without slowing traffic or risking getting fined to ride on the sidewalk. I weight aprox 70kg/ 154lb
@fixmypev 9 ай бұрын
Assuming your battery is healthy, that should be a maintainable speed. But be careful accelerating too aggressively below 50-40%.
@francisgeorge8270 8 ай бұрын
Help! I have firmware Cassiopeia - 6153, and my board is stuck “nose up” after upgrading the Future Motion software, and switching out WTF rails for standard ones. What can I do to re-level my board to factory? Thanks.
@fixmypev 8 ай бұрын
The only current way to re-level your board is to have it reverted to 6109 first. That’s not a process that can be completed via Bluetooth. If you’re interested in finding out what that entails, send us an email at www.fixmypev.com/contact-us.
@mikeboussias 9 ай бұрын
Thanks a million for that, my pint is alive again! One thing though, today i got error 16 for the first time, might that be bacause of the higher top speed setting (2000)?
@fixmypev 8 ай бұрын
Error 16 is a BMS/Controller error and shouldn’t be related to the Top Speed setting in any way. Have you had any issues since?
@mikeboussias 8 ай бұрын
@@fixmypev nope, just that one time
@fixmypev 8 ай бұрын
@@mikeboussias That's good. If it becomes a recurring thing, you'll want to make sure to have your board checked out. Error 16 isn't a fun error to have to deal with.
@dogbog99 10 ай бұрын
If I have a posi footpad will the deactivation delay tweak still work?
@fixmypev 10 ай бұрын
Doubtful. If you have previously posi’d your footpad, the deactivation delay will not operate as it normally does (reverts to dual-zone sensor). In your case, the sensor likely acts as a single zone at all times. That will still happen in the event that you attempt to apply the posi patch.
@vrthykr7070 9 ай бұрын
Looking to change pushback and get posi/jump time for my 10 year old's pint. He shreds and is always at pushback. Pint on 5314/5069....does it simply downgrade to 5040 during process? when on 5040 and the new firmware comes out in a month will it be able to be updated if desired? Does it still work with the Onewheel app for changing shaping modes?
@fixmypev 9 ай бұрын
Yes. It will downgrade to 5040 which is what the patches are designed for. If you guys decide to update in the future, you will also be able to. Although it remains to be seen if FM will actually be adding any functionality other than the haptic buzz.
@derekkuschel361 2 ай бұрын
Just curious. How do you restore the backed up settings? I cant find a y info about that anywhere. Maybe its as simple as flashing the .bin. but figured id ask as i could see that bricking the controller if its not the proper method. Thanks for the great video
@fixmypev Ай бұрын
Hey, Derek. It’s a lot more involved than that. Requires disassembly, soldering, and special tools/knowledge. Feel free to email me at www.fixmypev.com/contact-us if you have any additional questions or needs.
@ihazhedont 10 ай бұрын
Thanks a lot for this video ! One question for the Pint. The app always mentions the FW 5040, does it mean that it doesn't work with other Pint FW ?
@fixmypev 10 ай бұрын
You’re welcome. This web app was designed to work with 5040 only. Each version of firmware is structured a bit differently which means the patches would potentially need to be written differently as well. That said, 5040 is more versatile in terms of modifications and upgrades like extended range batteries.
@marsrover001 10 ай бұрын
I applied the pint patch to a different FW version and it worked fine. I don't remember if it was an upgrade or a downgrade, but that pint ripped better than my plus till I sold it.
@Novias_Moped 10 ай бұрын
Would this help if someone with a GT received the “corrupt firmware” notification with the last update?
@fixmypev 9 ай бұрын
Unfortunately, not. This is not compatible with the newest version of GT firmware. If a corrupted memory error occurs, Future Motion is pretty much the only entity that can help (with some exceptions).
@mikekunis2547 9 ай бұрын
I'm on firmware 6132 GT wanting to revert to 6109 in order to level WTF rails via nRF then update to customer shaping 3.0 once I have my tilt dialed in. Am I on the right track here? I heard the tilt holds after the CS 3,0 update
@fixmypev 9 ай бұрын
Yes. You can definitely do that, but make sure to hold onto that backup file you generate with ReWheel. It might come in handy again in the future. 🔗
@slimecrime29 4 ай бұрын
If I install wtf rails on an updated get and want to go back to old firmware to level, how do you change your ride modes? Also can I level the board and then update? Thanks for all the work you do.
@fixmypev 3 ай бұрын
In theory, if you're able to find a way to properly downgrade your board, you'd be able to level and then update again if you wanted to. That said, being somebody who what it takes to do, I'm not aware of any accurate public resources that outline the process. And I can't publicize/publish anything due to the Digital Millennium Copyright Act (DMCA) protections.
@jackfrost1989 9 ай бұрын
I keep getting a update error during the first backup step with GT (6407) / Firmware 6153. I've power cycled the board and tried multiple devices. any tips? or info?
@fixmypev 9 ай бұрын
Power cycle and make sure the lightbar is multicolored before you press the FLASH EXTRACTOR button.
@jordaiisandoval9974 10 ай бұрын
Will this still work after the recent update that released custom shaping 3.0? I loved having no pushback but now that I updated the board I have it again
@KerbeX98 10 ай бұрын
No, it won’t. No way to rewheel or level the board after the update currently, give it time and the community will eventually do its thing.
@fixmypev 9 ай бұрын
@TheBlader121 is correct. It will not work after the recent update.
@elikormanik4498 3 ай бұрын
How do i prevent the popup asking me to update my board in the OW app? otherwise worked great thank you!
@fixmypev 3 ай бұрын
For iOS, you can use airplane mode or the Float Remote app (I have a video about Float Remote). For Android, I believe you have to block data and wifi from the Onewheel app or use the OWCE app. These third party apps work better if you’ve ReWheeled to ‘Remove BLE Handshake Check.’
@user-kd1mb6wn2v 9 ай бұрын
can I still do this with my original pint if I accdiently updated the app (which now has haptic buzz)?
@fixmypev 8 ай бұрын
No. This is not compatible with the newer firmware versions. However, if you have your firmware reverted (not possible via Bluetooth), you can then have access to this. If you’d like more information on this, send us an email at www.fixmypev.com/contact-us.
@Olivergoesbiking 3 ай бұрын
Hey Justin, I'm thinking about getting the Quart from Chi-battery systems and saw somewhere that haptic buzz is a real headache when switching batteries. So I wanted to get rid of the haptic buzz before ordering the battery. When I go to flash the extractor, the update keeps on failing. No matter how many times I try it, the update just fails. The percentage bar never goes past zero. I am wondering if this has anything to do with the current software of the board being 5314 or something with the Bluetooth on the board. I have tried multiple laptops and am about to try a Samsung phone. If you have any advice, it would be much appreciated.
@fixmypev 3 ай бұрын
This has to do with the fact that you’re on the newest firmware (Gemini - 5100) which isn’t compatible. Thankfully, the code was recently cracked and I just posted a video today outlining the downgrade process: kzfaq.info/get/bejne/obNxZtFylr_Rm5s.htmlsi=_coqRIBdwek2vkPD
@josetoledo8895 3 ай бұрын
I spoofed my board as an XR so I could get into the custom shaping, but now I'm unable to do this process again since ffm reads it as an XR now. How do I get around this?
@fixmypev 3 ай бұрын
You’ll need to jump straight to the ‘Flash’ tab and flash either base or patched firmware. I always recommend flashing base and starting fresh with a new backup for safety.
@firedragon9161 10 ай бұрын
Does this work with the new haptic buzz update or should I wait? I have the pint
@fixmypev 10 ай бұрын
This will not work with the updated firmware. If you do this now, it will be overwritten if you decide to update when the new Pint firmware update gets released within the next six weeks.
@torrustico 10 ай бұрын
FM recently announced that we are getting un update for almost all models. Does it means that we'll be able to rewheel also the Pint X??
@fixmypev 10 ай бұрын
Unfortunately, no. And that's unrelated to the new updates. The ReWheel project was shut down over DMCA claims and has not been progressed any further since that happened. At that time, only the OG Pint and GT were compatible with the firmware patches. That's where things stand and will likely stand moving forward. But...we never know what might happen down the road.
@devinmichaelpruett2791 9 ай бұрын
So the resource “OTA Files Pint/GT and firmware” link just keeps giving me a protocol error page? I’m on chrome. Am I missing something?
@fixmypev 9 ай бұрын
It gets blocked by certain people’s browsers for some reason. Security settings or something. Try a different browser.
@dogbog99 10 ай бұрын
Does it matter what firmware your GT is on? Can this be done with the latest GT firmware?
@fixmypev 10 ай бұрын
So far, we have not received any reports that it is unable to be completed with newer firmware versions. However, that could change in the future; depending on what Future Motion decides to do in terms of their product design.
@Floaty_Bodee 10 ай бұрын
Hey was just wondering if I would still be able to get updates from future motion if I did this to my board. Like could I get the custom shaping update later from future motion?
@fixmypev 10 ай бұрын
Yes, that’s highly likely. However, it will overwrite all of the patches you had previously flashed.
@Floaty_Bodee 10 ай бұрын
@fixmypev Thanks! That’s great to hear, I’m going to probably do this to my gt and pint!
@fixmypev 10 ай бұрын
@@Floaty_BodeeSounds good! Let us know if you have any questions. www.fixmypev.com/contact-us
@Crazyman1338 7 ай бұрын
@fixmypev PLEASE tell me you have a save of the Pint 5040 file you’d be willing to send? I have been asking around on forums and no one seems to have it. If you send the file out I should be able to down grade mine from the current 5100.
@fixmypev 5 ай бұрын
I do not, but the website referenced in this video still hosts the files as far as I know (check the RESOURCES tab).
@sahaleemedlar3811 2 ай бұрын
Hello guys I ride in GT with the firmware flash as on the video but unfortunately I accidentally updated the onwheel app and now I'm in Cassiopeia - 6153 how to go back please I need help I hate the haptyc buzz
@fixmypev 2 ай бұрын
Ouch. Since FM’s Onewheels are legally protected by the Digital Millennium Copyright Act, I can’t provide any assistance with this at this time. Sorry.
@xrayhead 3 ай бұрын
FM need to get a live, they seem to be more interested with $$$$ than giving what the customers want.
@fixmypev 3 ай бұрын
They’ve got their reasons and they’re sticking to them. 😅
@breadpitt1 9 ай бұрын
Hey Justin, awesome video! just wanted to ask. can I still use onewheel app after this modification to monitor my mileage?
@fixmypev 9 ай бұрын
Absolutely! Just keep in mind that you may end up getting update popups depending on which board model you have. This is because FM is currently pushing updates for the GT and will be pushing updates for the XR, Pint, and Pint X within the next six weeks. The update popup ends up blocking the rest of the functionality of the app. It's not completely unusable, but mostly unusable. You can check out our 'Workarounds for iOS & Android' video to learn more. kzfaq.info/get/bejne/hZaUeNGhzKeXZ30.htmlsi=k3-KJ0T4nFPNND5M
@breadpitt1 9 ай бұрын
@@fixmypev thanks for the info dude 🤙
@WoojimalGaming 8 ай бұрын
does the update stop you from using ffmwheel?? @@fixmypev
@BurnzyakaPookieTWH 9 ай бұрын
Is anyone in the community still working on this stuff? Or have FW scared them off? I'd love to change a couple of things on my pint x.
@fixmypev 9 ай бұрын
Not really. Maybe a little tinkering here and there, but nothing super progressive as far as I can tell. The DMCA claim against ReWheel really took a lot of the wind out of the sails.
@clutchdrops451 5 ай бұрын
After you rewheel it and want to change the patches do you just go to patches or do i have to repeat all the steps again?
@fixmypev 5 ай бұрын
You can technically just start at the ‘Patches’ tab, but I recommend completing the entire process again to be safe. This is because you will generate a new backup file (that saves your board’s most current stats). In the event that your board gets bricked and needs to be recovered, that up-to-date backup file is extremely important to have.
@RobertLaurie-ep1ef 4 ай бұрын
I have a 6404 hardware and 6153 firmware will this work for me ?
@fixmypev 3 ай бұрын
Unfortunately, no. This process is not compatible with firmware version Cassiopeia - 6153+ (GT) or Gemini - 5100+ (Pint).
@DaveWappler 9 ай бұрын
How can I change simple stop on my rewheeld gt?
@fixmypev 9 ай бұрын
Try connecting to the ‘Live’ tab on ReWheel and see if you can do it there.
@user-tl2vc3sc9s 9 ай бұрын
my pints firmware says Gemini -5050 does that in any way make it so this process would not work?
@fixmypev 9 ай бұрын
This works with Gemini - 5050! 🤙🏼⚡️💯
@Mr.alphabeing 9 ай бұрын
Is there any performance booster mod for XR available in the market? Regretting for updating my GT.
@fixmypev 9 ай бұрын
Not at this time.
@adamsaffron6721 6 ай бұрын
Is power cycling, holding the power button to restart? (Edit: looks like you're clicking twice to turn off and on)
@fixmypev 5 ай бұрын
You got it! It’s just a simple power off and power back on.
@MattWeaver909 4 ай бұрын
Just did this to my pint. It wouldn’t let me set the speed to 2500 so I just did 2000 and that worked. At least it’s still faster than stock. I’m also going to be doing a quart battery upgrade soon and wondered how I could reflash this and change the setting regarding battery percentage.
@fixmypev 3 ай бұрын
Hey, Matt! The 2500 value is only compatible with the GT as the Pint isn't programmed to allow a pushback threshold higher than 2000 (~22.48 mph). Setting a value any higher than that (I've tried) errors out the firmware.
@arfifteenguy 9 ай бұрын
I was trying to do this on a Mac and PC and Android and the OTA files link will not load is there a new link?
@fixmypev 8 ай бұрын
Sorry for the delay! If you’re not able to access the link, you’ll want to check your browser and/or network security settings. The URL is still active.
@breedinlondon 9 ай бұрын
Probably a dumb question, but if I check the custom shaping box will haptic feedback come automatically? I don't want that shit, I'm an experienced rider and that shit honestly scares the hell out of me like I'm going to fall flat on my face! I'm used to pushback and understand how to ride it out without pushing too hard to a nose diving point. Also, will the official onewheel app try and auto update the board or can I still use it without issue? (For riding modes and such)
@fixmypev 8 ай бұрын
Allowing custom shaping via this method will not cause haptic buzz to be enabled on your board. That is only a feature of the newer firmware versions. The Onewheel app will not auto-update your board, but it may bug you about updating. There are methods of getting around this.
@jeremyess2781 10 ай бұрын
Not sure if I missed this, but will it work for GT firmware 6133?
@fixmypev 10 ай бұрын
We have heard it works with 6132, but we haven’t had the chance to test it with 6132 or 6133 yet ourselves.
@Scarski99 2 ай бұрын
my board is flashing yellow and blue after pressing the flash extractor and went through the updating process, and now when I press dump bootloader its stuck on 0%, am I shit out of luck or is there something I can do save my wallet?
@fixmypev 2 ай бұрын
Confirmed you are running Gemini - 5326. Unfortunately, this tool is incompatible with that hardware version. 😞
@TheDragonBoiYT 10 ай бұрын
I selected the custom shaping option for my pint but I can't find where I can adjust those settings. If you know where please let me know!
@fixmypev 10 ай бұрын
Hey! Check out the ‘Live’ tab on the same site you completed this modification process with.
@TheDragonBoiYT 10 ай бұрын
@@fixmypev Thank you!
@fixmypev 10 ай бұрын
@@TheDragonBoiYT You're welcome! Enjoy and ride safe! 🤙🏼⚡💯
@maicrodose Ай бұрын
Facing issue with extract key, getting error: "Failed to find key for decryption"
@fixmypev Ай бұрын
Make sure you are using the correct file. It should have a similar file name to ‘ow######-extracted-bootloader-settings.bin.’
@OrthodoxNYC 6 ай бұрын
Is there a way to check GT FW without connecting to the onewheel app?
@fixmypev 5 ай бұрын
Not unless it has been ReWheeled to ‘Remove BLE Handshake Check.’ A BLE handshake (with the official Onewheel app) is required before the board can connect to any third party apps.
@bryanwhite7934 4 ай бұрын
For whatever reason the only browser that I can get to load the app is Brave which isn't compatible. I tried Chrome, Firefox and Opera and get an error page in all of them :(
@fixmypev 3 ай бұрын
Send a message through the FixMyPEV contact page and I'll see if I can help you get things sorted out. www.fixmypev.com/contact-us
@cryo3215 10 ай бұрын
Another question haha…. So I really don’t want the haptic buzz but want the custom shaping, so should I do this process now and just never update the OW app? Im just so pissed they incorporated the buzz feature with custom shaping in the same update
@antonioma8612 10 ай бұрын
I'm currently in the same boat right now. Just saw FMs firmware update video and saw quite a few people complaining about bricked boards after attempting the update. I'm thinking I might go the custom patch route.
@fixmypev 9 ай бұрын
If you do this process, you’ll get the basic custom shaping, but will not gain access to Custom Shaping 3.0.
@Buffetology 7 ай бұрын
Ahhh shucks...it does not work with my pint on firmware 5100 :( Will you have an updated version ???
@fixmypev 5 ай бұрын
Due to the countermeasures implemented by Future Motion to block these apps/tools, an updated version is not seeming realistic at this time.
@benjaminenriquez3059 9 ай бұрын
When I try to download the pint-gtfw&extractor.zip file chrome blocks the download because it says the zip file has malware. Has anyone else had this issue? Does this really contain malware? I’d hate to kill my Mac for this.
@fixmypev 8 ай бұрын
The files are completely safe. It just happens that different people have different security settings which leads to different download experiences. Have you been able to make use of the files since this comment?
Magic Skateboard Media
Рет қаралды 16 М.
Chad Brown
Рет қаралды 4,3 М.