How to 3D Model Anything
Рет қаралды 579,709
Күн бұрынAfter watching this video, you will learn how to 3d model anything from scratch. You will be able to apply these simple workflows to model anything you have in mind.
To support my channel: www.buymeacoffee.com/OnMars3D
Professional Website: onmars3d.com/
Gumroad: gumroad.com/onmars3d
Artstation: www.artstation.com/onmars3d
Instagram: / onmars3d
Software used in Tutorial:
Maya 2022.3
#3D #3dmodeling #3dart
-----------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------
Table of Contents
0:00 Introduction
0:28 Overall modeling workflow
1:25 Gathering reference
3:11 Curve guides
7:13 Creating a 3D blockout
14:16 Retopology and edgeflow
20:14 Refining and adding further details
31:34 Recap and conclusion
33:44 Sports car seat modeling timelapse
-----------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------
@OnMars3D Жыл бұрын
Check out my Patreon/KZfaq Membership for all my project files, 3d models, bonus videos, Discord and more or just to support this channel 🙂 www.patreon.com/OnMars3D
@polpettaio 2 жыл бұрын
Finally someone talking about it. I always thought it was much easier to do the rough model and then do a ritopology to improve the topology. Getting mad about the flow of existing polygons seemed absurd to me. Thanks to you, I don't feel the only one anymore.
@OnMars3D 2 жыл бұрын
You're not alone :)
@BruceCarbonLakeriver Жыл бұрын
@@OnMars3D same with me here - thanks for sharing your knowledge. I'm gonna try that one out tomorrow :D
@nofx7058 8 ай бұрын
have you used curves before to define a model like this?
@povilaslondon 7 ай бұрын
Also doing retopo improves your modelling skills. So you become more efficient when modeling base meshes or detailed models from a get go. I've learned so much doing this specifically how to terminate edges/polygons in an efficient and clean way.
@einzelganger5290 5 ай бұрын
@@povilaslondonSpot on!🎯 You know what they: practice makes perfect.
@Toprak1552 2 жыл бұрын
I've tried to use curves to create a blockout after watching this and this may be the most important modeling tutorial I've ever watched for the last few months months. I'm learning 3D modeling for a while and I hit that mind block where you can't process anymore but after this I modeled things I've failed miserably in the past few weeks :D
@Hugo_Dvz 2 жыл бұрын
this was genuinely a phenomenal video, it's given me the courage to branch out from purely hard surface brute force modelling into modelling with this organic flow and curve utilisation
@OnMars3D 2 жыл бұрын
Glad to hear that the video helped!
@happypoot3008 2 жыл бұрын
Wonderful tutorial! You did a great job explaining and actually showing how to apply those steps and giving examples that i feel like some tutorial don't do enough. I have been modeling for sometime now and I don't really have a "workflow" when i model something so i will definitely be trying this modeling approach. Thanks man!
@OnMars3D 2 жыл бұрын
Happy to help and thanks for the feedback!
@IbelinnCreations Жыл бұрын
Thank you so much for making this!! I've been struggling a bit at school with how to tackle different forms properly and this is such a nice way of explaining it 😭
@mirabella366 2 жыл бұрын
This was so helpful and I learned a bunch of new things! Thank you.
@raV_3d 2 жыл бұрын
It is such an efficient workflow to use curves as a easy-mode for "sketching" the form (with blueprint or not) and then just focus on blocking and refining. Reminds me a bit of a freedom, that only sculpting gives when creating a base form for modeling with retopology tools. Tbh I have never seen that kind of workflow with snapping polys to curves. It works with Blender and I am more then happy to try it, especially with organic modeling which I find this technique will be a beast. Many thanks for this video!
@filipg.8852 2 ай бұрын
What curves are you using for this (bezier or nurbs)?
@raV_3d 2 ай бұрын
@@filipg.8852 I prefer Bezier curves. Iif you can`t snap to, subdivide it a few times and you`re good to go.
@wasoha 2 жыл бұрын
my main takeaways here were using curves to create easier reference and retopology after creating a basic form. im a beginner so my method was that my reference was only the imported flat images, and then worrying about topology at the same time as establishing the form. ive struggled with topology in the past and this seems way easier. I use blender these days but I think all the same ideas apply. the only part im kinda fuzzy on is how you went about breaking out the paneling from the main model but I assume I can find tutorials for paneling.
@scratchy5238 2 жыл бұрын
I also use the different steps with blockout and continously adding details, but the curve method for modeling is new to me. Very helpful as always great tutorial👌
@OnMars3D 2 жыл бұрын
Yeah, it's always nice to mix and match different methods, glad it helped!
@user-fr7yi5cc6m 2 жыл бұрын
If you kept it going till now you have all the respect that I can give
@anlexaify 11 күн бұрын
This is like sculpting but for hard surface models. I ought to incorporate this into my workflow!
@Eric-cj9mu Жыл бұрын
Great video! Thank you. Definitely some new things learned from this one.
@marlo3d288 2 жыл бұрын
I love your videos! You explain it nice and clear.
@dziewiatkom Жыл бұрын
Thank you for explaining your process, really excited to see what I can do with these methods!
@OnMars3D Жыл бұрын
Happy to help!
@Fasimedes 2 жыл бұрын
This channel is pure gold!
@OnMars3D 2 жыл бұрын
Thank you, glad you enjoyed it!
@PieterHanja Жыл бұрын
This workflow tutorial is awesome!
@eazygfx4815 2 жыл бұрын
38:20 very chilled beat, love it
@shrimusical5899 6 ай бұрын
Thank you for this, much needed tutorial for a beginner like me .
@AlexTsekot 2 жыл бұрын
The CTRL + MMB to move along normals is a new one to me and I've used maya for over 10 years, always something new to learn!
@OnMars3D 2 жыл бұрын
Yeah, I'm still learning small tips and tricks after using Maya for a while, like you said, always something new.
@sqwert654 2 жыл бұрын
It's the first things I look for these days, how can I move things in the directions I want, how can I snap this to that. Then I map the shortcuts in my Razor Tartarus, before I forget and because I hate multi key functions.
@juanjosepariciolago2776 2 жыл бұрын
do more of this!! this is amazing
@Keilnoth 10 күн бұрын
Thanks, these workflows videos are the best. Beginners like me often struggle with how to start from a sketch or idea and make it in 3D efficiently. It's the thoughts process that seems to be fundamental to me and not really which software we use, or even the best topology. Also it helps with not getting overwhelmed by unimportant details from the get go.
@OnMars3D 2 күн бұрын
Happy to help!
@takanorisuzuki783 11 ай бұрын
I am an aspiring CG artist. Thank you for uploading such a great tutorial! I immediately subscribed you. I will keep watching.
@sergeyink55 8 ай бұрын
Cool work!
@CGLife 2 жыл бұрын
Holy this was the tutorial I was looking for when I started, but never found! Great work, from a blender lover
@OnMars3D 2 жыл бұрын
Glad you liked it!
@3Dobjects 9 ай бұрын
nice one! just in the first minutes you already talked about curve shaping and more things should be used in all processes. well done!
@nolanneidig2976 7 ай бұрын
Thank you so much! This is such an easier spot to start with modeling and makes the process easier to understand and work with. Thank you!!
@OnMars3D 7 ай бұрын
Glad it was helpful!
@thekatalexander Жыл бұрын
You are single handedly getting me though school. No shade to my teachers but I just understand the way you explain things!
@OnMars3D Жыл бұрын
Always happy to help!
@dilippatil9508 2 жыл бұрын
This tutorial is very helpfull for understanding work flow
@akioasakura3624 9 ай бұрын
This is litearlly one of the best tutorials ever. Big up sir TYSM
@dsusilaenglishteacher2360 Жыл бұрын
Wow, so well done! Thanks for posting, man! Very helpful.
@OnMars3D Жыл бұрын
Happy to help!
@dvibebrasil 8 ай бұрын
Good, great job!!!
@KuroNeko-gp8kh 7 ай бұрын
you really help me with your workflow, i was stuggling with detailing and retopology when i should be focus on block out instead. Really helpful
@OnMars3D 7 ай бұрын
Glad to hear it!
@galinouprod2692 7 ай бұрын
Cool 👍
@thesim1990 Жыл бұрын
14:36: I like to use this same technique when it comes to crazy complex hard surface shapes. It was a godsend when working on a motorbike engine. Just quickly rough out the engine shapes using primitives then retopo.
@OnMars3D Жыл бұрын
Exactly, it helps a ton for more complex shapes!
@kedya6375 2 жыл бұрын
Thank you for you work!
@OnMars3D 2 жыл бұрын
Happy to share!
@EnterMyDreams Жыл бұрын
this is really useful and helps confidence of beginners thank you !
@sivapandianreffreference 2 жыл бұрын
great so much super simplified and clear
@sivapandianreffreference 2 жыл бұрын
Thanks so much
@Ruftinator Жыл бұрын
This workflow makes a lot of sense to me, not sure why I’ve never really seen it or thought of it. This is certainly gonna help when I’m going to try and model some cars😎
@OnMars3D Жыл бұрын
Glad to hear it!
@decoynotreal2114 2 жыл бұрын
best tutorial ever!!!
@beans9288 7 ай бұрын
Oh man this is the video I’ve been needing!! I know all the tools and everything, I can operate maya just fine, but I never know the actual process of making the item 😅 Thank you so much, I haven’t finished the video yet but it’s answered so many of my questions already!!
@OnMars3D 7 ай бұрын
Glad I could help!
@3akorInOfTime Жыл бұрын
Thanks a lot!!! You save my life!
@draudeky4508 5 ай бұрын
good to know this kind of worklow, rep+
@tushartakalkar 2 жыл бұрын
Thanks for giving this valuable knowledge🙏🏼
@OnMars3D 2 жыл бұрын
My pleasure!
@MrWarriorBD Жыл бұрын
Really awesome guideline
@moonasha 5 ай бұрын
man I had no idea about the quad draw tool, went and looked it up in the documentation during this video. Really neat tool.
@lorgaraurelion1789 2 жыл бұрын
Man,it`s really cool tutorial.I think it`s one of the most useful tutors
@OnMars3D 2 жыл бұрын
Appreciate it, thank you!
@falakchaudharygaming7342 2 жыл бұрын
This is the best free software Ive seen. Respect.
@pv8685 7 ай бұрын
Awesome Video... Now you can 3d print the best scale model seat for a hot wheel car in the world! 🤯
@asimali3898 2 жыл бұрын
Thank you
@alvin_aliev 2 ай бұрын
Very useful approach to modeling. It’s strange that no one talks about it until now.Thank you bro!
@OnMars3D 2 ай бұрын
Happy to help!
@RichellyItalo 9 ай бұрын
Thank you for this!
@OnMars3D 9 ай бұрын
Glad it was helpful!
@konstantin3369 2 жыл бұрын
I usually create a basic shape in Zbrush for my characters, then I use Moi3D to create some Hard Surfaces of details, then I throw it in Maya and also use Quad Draw to build the correct topology...I'm learning to create robots, robot parts, Cyber muscles, some Sci-Fi shapes, details and e.t.c.I really liked your method..fast and high-quality.Thx you for your tutorials 🙏
@swinny_ Жыл бұрын
Thanks for opening my eyes to Moi3D - im doing alot of hard surface right now and now going down a rabbit hole!
@bsko3D 8 ай бұрын
You are making my day today
@bruno_mcd 3 ай бұрын
Small tip for those following this tutorial: if you go to the website, click on any of the race seats and download the brochure in PDF. Once you do that, open the PDF in illustrator (the blueprints should be on page 26/27). You should have access to the vector blueprints. Export the files in PNG, adjust the PPI scale and enjoy large format, high quality blueprints to create those splines. Hope this helps! :)
@OnMars3D 3 ай бұрын
This is great, gonna test this out, appreciate the tip!
@sadstatus1.195 2 ай бұрын
Thankyou sir 💖
@Timmen8e7 Ай бұрын
this is really the best hard surface tutorial I ever see in my life.
@OnMars3D Ай бұрын
I'm glad to hear it :)
@kapwinng 2 жыл бұрын
Nice!
@dikrv5232 2 жыл бұрын
Nice video! Thx!
@OnMars3D 2 жыл бұрын
Glad you liked it!
@nov3000 2 жыл бұрын
thanks always good
@dhabasushivakumar6118 2 жыл бұрын
Was waiting for your video Master 🙏🙏
@OnMars3D 2 жыл бұрын
Hope you find it helpful!
@dhabasushivakumar6118 2 жыл бұрын
@@OnMars3D yeah, it is very useful Master
@Sifter2D 2 жыл бұрын
12:57 so you do teach! No wonder you're this good at explaining. Hats off to you, sir.
@OnMars3D 2 жыл бұрын
Yeah, I've been teaching for a while, over 10 years now, thank you!
@HuyHoang-qy1dq 7 ай бұрын
Finally I can find a channel which really teach beginners how to do step by step. Not like others channel alway x2 speed and click freaking fast, who can understand it ? I hope you will have a course series on learning platforms like Skillshare, Udemy or kind like that. Love you so much ❤
@OnMars3D 7 ай бұрын
Thanks, more to come!
@bsko3D 8 ай бұрын
Oh look, a proper donut tutorial :)
@GamePlanStudiosRS Жыл бұрын
I don’t usually comment, but this method is incredible!!!! Your videos are all top tier man, keep up the amazing work!!!
@OnMars3D Жыл бұрын
Thank you for the kind words, more to come!
@amineadimi7245 Жыл бұрын
great boss
@shubhamfartade7105 4 ай бұрын
cool
@andreap9319 2 жыл бұрын
THANK YOU THANK YOU THANK YOU
@OnMars3D 2 жыл бұрын
You're welcome :)
@Adt874 Жыл бұрын
thank you good people, for this very expensive knowledge
@smitestudio3883 Жыл бұрын
16:10 Im modelling mostly hard surface so i dont need to worry about retopology. And if i gotta do retopo i export it to 3DCoat for retopology.
@sagitta9891 21 күн бұрын
I'm not really mastered Maya yet but I think I can use these methods on Blender for my current project. Thanks!
@OnMars3D 2 күн бұрын
Glad to hear it!
@warriormaddy420 11 ай бұрын
nice thankyou
@seokim7211 2 жыл бұрын
This is exactly what I’ve been needing😍😍 Thanks so so much for sharing🙏🙏
@OnMars3D 2 жыл бұрын
Happy to share!
@AnanthakumarBalakrishnan Жыл бұрын
create a full video on creating Curve guides Maybe Time-lapse also fine its very important step
@pradeepdurai8661 8 ай бұрын
This workflow Looks really awesome. Can you provide any suggestions about how to get on with this in blender.
@babyjohn3356 2 жыл бұрын
Not easy as it seems, people who does 3d models fast my respect to them , I'm always impressed. I wanna learn but I just can't do it so hard specially characters
@jenkathefridge3933 6 ай бұрын
Characters and cars are difficult but i'm learning from my mistakes
@J4ME5_ 3 ай бұрын
that middle mouse x thing is frustrating, but oh man what a great video. Day two and the snapping C middle mouse is inconsistent, or offset. I am using Maya 2024.. very frustrating.. sometimes it feels like I found the perfect tutorial, only to be blocked by very frustrating issue. I wonder if its because I have a middle mouse wheel or something. Sometimes it works, sometimes its offset, sometimes it does nothing. I probably manually slid the vertices 75% of the time.
@chenjieyung2896 2 жыл бұрын
謝謝！
@buraktabakoglu 4 ай бұрын
Please create this workflow tutorial for Blender Mars, it would be a game changer.
@dremm9502 2 жыл бұрын
Finally!
@OnMars3D 2 жыл бұрын
:)
@ramyissa20 2 жыл бұрын
very satisfying and informative, I love this 🤍
@mitchrussianimmersionchann63 Ай бұрын
Thank you for this detailed video! Is it possible to create a guide curve version of a model if I only have a front and a side photo? In this case, I'm trying to outline a leather boot, but it's hard for me to deal with the curves.
@OnMars3D 27 күн бұрын
Yeah, this workflow can work for any type of model. The curves are just a reference, like a 3D blueprint
@villagercraftmc 6 ай бұрын
still cant do it im an idiot
@learningtodrawstudios4773 3 ай бұрын
takes practice just keep trying, keep learning took me almost 5 years to get to a point where I'm actually starting to make stuff kind of consistently. you've got this
@Gredran 3 ай бұрын
It sounds like you may still need a walkthrough of which buttons to click. Which is totally fine, 3D is complex. But this is DEFINITELY for when you have a solid knowledge already I think and then allows you to talk that knowledge and make anything with it
@imtrash6713 2 ай бұрын
LOL
@DeltaStridePLZ 2 ай бұрын
Same
@petershow8372 2 ай бұрын
Same ☹️
@alicannurcin7933 2 жыл бұрын
Great video, learned a lot. Thanks.
@OnMars3D 2 жыл бұрын
No problem, happy to help!
@Mr.McWatson 5 ай бұрын
What's the advantage of pulling faces out rather than using grid fill etc on the existing curves? I use Blender, and there I'll start with the subserf guide, then shrinkwrap geometry onto that in sections which I copied form the original. This is kind of the same thing isn't it? This is just a little more accurate off the bat.
@TheFrogChannel 9 ай бұрын
His rough blockout mesh looks cleaner than all of my finished meshes 💀
@denislenoiraristocrat4751 2 жыл бұрын
please may you make this tutorial for Blender and substance painter too? one of my friends really need it ♥ ty
@OnMars3D 2 жыл бұрын
You can download the vintage and modern seat 3D model here: artstn.co/m/00R8x What modeling workflows do you use? This is not a definitive list and this is not the only way to 3D Model. I will post more videos on this topic in the future, but let me know which modeling workflows you use on on a daily basis and helped you really improve your 3D modeling skills. And don't forget, you can join our active discord here to help grow your 3D Art Skills: discord.gg/G3Z8tkzmuM
@idkwhatvideostopost7649 2 жыл бұрын
I use blender and fusion 360. I do the more accurate parts of the model in fusion 360, then export them into blender to do more of the irregular parts to save time and make a model that looks alright.
@benzadrianz3811 2 жыл бұрын
Maya 2018.... and im noob
@akura2 2 жыл бұрын
Can I have this model? 😁
@a420dro 7 ай бұрын
I found your workflow very time consuming, the amount of hand drawn curves etc., I'd burn out fast. The output is straight clean, but usually u cannot spend a day on modelling one car seat asset if it's not concept for seat/car manufacturer. I'm team max as basic gateway, but fast workflow is zbrush, masking, polygroups and remeshing to keep nice topology, if it's screwed too much then retopo, (if model is not a hero and simple or very organic and I'm lazy, then retopo in Instant meshes). Coat for UV. I'd do this seat by quick blockout with premade holes already with nice loops, correct basic outer shapes for less thinking. In zbrush quick shaping along with polygroups marking, remeshing, creating desired 3d details, then copying it, making bump details and exporting both models for detail projection and texturing. For lowpoly models I prefer oldschool manual modelling although zbrush is good for quick lowpoly art
@nguyenhainguyen1 7 ай бұрын
Could you please post a full length video of how you made these.
@OnMars3D 7 ай бұрын
I cover another car seat using the same workflow here: kzfaq.info/get/bejne/q9eSbM-Zm82pZok.htmlsi=11W3CIjgJHfNSd3V
@atomicshrimpFT Жыл бұрын
Curve method is very much new to me. But is it really helpful for every situation? Like I can image it sometimes being unpractical wirh simpler models
@equinox6229 2 жыл бұрын
I have a question concerning the retopo part; Is it still practical for very hard straight lines ? It seems you can only eyeball the polygons placement often times making the edge flow wobbly around sharp edges.
@OnMars3D 2 жыл бұрын
You can be more organic with polygons modeling focusing more on the "flow" of edges instead of exact placement.
@swordfishfins7842 2 жыл бұрын
When you said there were jets flying around I was thinking there's a ghost in my room :D
@OnMars3D 2 жыл бұрын
eah, I tried to wait but they were going all day, hopefully it wasn't too distracting.
@CodeZakk 2 жыл бұрын
Amazing tutorial!! My question is what is advantage of curves other than vertices??
@OnMars3D Жыл бұрын
It's a clearer way to view the model and create freeform reference. When using geometry, things get a bit messy. I go back and forth between geometry and curves.
@nicod974 Жыл бұрын
Very good tutorial
@user-tg9bm6vr2q 7 ай бұрын
This chair's shape looks like Munch's painting "The Scream" 🤣🤣
@1955Rodri 10 ай бұрын
Do you have a tutorial of modeling from curvs nurbs to surface ? I mean a tutorial without primitive polygon
@zojirushi1 Жыл бұрын
Time stamps would be great! :D
@imageseditingworld9076 9 ай бұрын
Sir, Can you please explain how to make curve reference?? I can't undrastand
@SAGU.GAMING 2 жыл бұрын
Can you do for user mobile phone/android
@zilog1 7 ай бұрын
Im excited to load up softimage 3.0 on my SiliconGraphics Octane loaded with 1gb of ram and the fastest MXE gpu you can get. Git my serial port wacom and 3d mouse ready to go. Time to get totally radical and zooted
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
Jason Derulo
Рет қаралды 58 МЛН
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН