Just what I needed, thanks so much for sharing this video and the parts number. Mine just started with the noise so in need to get this fixed. Thanks again.
@kylebeach23165 ай бұрын
You were one lucky person too catch it early, saving you alot of money
@wittracing72davidwitt745 ай бұрын
I would not ride it till you get it fixed . I couldn't get the basket for my son's during Covid and it grenade . You walk out of the shop at anywhere between $ 3600 to $ 4000 .
@ononewheel75 ай бұрын
Don’t wait get it done asap.
@user-ln6ss7bt5d5 ай бұрын
This is what I will be doing this weekend. Thanks for the video I will follow along.
@ononewheel75 ай бұрын
Nice get it done.
@joshdoyle34385 ай бұрын
I feel like this is burnt into my mind iv heard you say it so much.. great video.
@ononewheel75 ай бұрын
Thank you. Its a must do for sure.
@vintagetrikesandquads401222 күн бұрын
It's outrageous that you have to spend $400 just for piece of mind. It would be easy enough for Yamaha to go back to the old design, but I guess they like forcing people to buy an expensive part.
@ononewheel720 күн бұрын
It really is its a very known issue and should be addressed.
@leedimatteo50785 ай бұрын
nice looking quad, don't need that basket coming apart!!
@ononewheel75 ай бұрын
Nope it gets real expensive fast if it does.
@Gekofcb5 ай бұрын
Ordered all kit. Waiting your next video FLYWHEEL bolts :) Thanks!
@ononewheel75 ай бұрын
Nice. That one drops Monday at 3pm
@goldenboygq95 ай бұрын
Man I remember you telling me in one of my videos to change it and I’m finally going to do it 😅 quad has been running fine but don’t want to push my luck mines a 2014 YFZ450r. It doesn’t seem to hard of a job. thanks for the video brother awesome quads!
@ononewheel75 ай бұрын
It can be hit or miss like this quad had some time on it and now it was starting to go. Probably minutes away from grenading. Its very easy if you have any more questions feel free to ask and i can help.
@goldenboygq94 ай бұрын
@@ononewheel7 sure will thank you!
@miguelgarcia2135Ай бұрын
my 2022 just blew up on me, I'm just hearing about this problem
@JacksonOffroad255 ай бұрын
I really need to get this done after this trip to Carolina adventure world coming up lol
@ononewheel75 ай бұрын
Ya don’t wait its a know issue and if it goes you will be replacing your cases.
@CodyYFZ420Ай бұрын
When I go to pull the hub out on my 2020 it comes out about half a inch an stops like it’s hitting something
@ononewheel7Ай бұрын
Try rotating it then pulling it out. Also make sure you remove the washer in front of it.
@dustinrichards8401Күн бұрын
When ordering the Hinson basket you have to take off the gear on your oem one and put it on the Hinson, it still reuses the springs on the back doesn’t it? I put a Hinson basket in my other yfz years ago but can’t remember if that’s what you have to do
@dustinrichards8401Күн бұрын
If you reuse the springs on the Hinson basket can the springs still explode
@bigboy56462 ай бұрын
Hello, what is the reference of the EBC tool. Thanks you.
@ononewheel72 ай бұрын
You can get them at bnr motorsports
@tooslowforthis4453Ай бұрын
just bought a 2018. already ordered and received new basket, lock washer, and thrust plate. ain't taking no chances with my investment edit: my best guess is Yamaha changed it to profit more off of parts after selling the bike. planned obsolescence is a bitch, benefits companies while screwing the consumer
@ononewheel7Ай бұрын
Ya i can’t believe it has not been a recall its been a known issue for many years and can even happen with brand new stock machines. Sweet man congrats on your new ride 😎
@dakotawilkens6995Ай бұрын
I have a 2005 yfz not the r and just put a kit on and now time for my clutch work. Will this still work?
@ononewheel7Ай бұрын
This is for the efi clutches only. As far as i know i have never heard any issues with the carbed clutches
@wyattcalton24382 ай бұрын
Idk man I have the rubber bushing clutch and it's noisy AF.
@ononewheel72 ай бұрын
They maybe noisy but won’t ever explode.
@yfz_goon3 ай бұрын
hey i did this upgrade a few days ago step by step and when i starter the quad the clutch was making a loud whirring noise only when in netrual with the clutch out, and also sound loud when i was moving in gear. any idea what it could be?
@ononewheel73 ай бұрын
Hard to say without hearing it. Id double check it all.
@ThauserGomes4 ай бұрын
Does the clutch assembly of the YFZ 450R 2024 fit perfectly on the YFZ 450R 2009? without adaptations?
@ononewheel74 ай бұрын
Everything is interchangeable. Just change the basket, washer and you can re use everything else.
@shrike5573Ай бұрын
Will a Hinson billet clutch Basket work does it have to be the OEM?
@ononewheel7Ай бұрын
Yup there are a few options vs the stock basket.
@shrike5573Ай бұрын
@@ononewheel7 alright thanks
@josemarrero798214 күн бұрын
Is this something i should to do my 2024 yfz450rse also???
@ononewheel713 күн бұрын
Yes
@josemarrero798213 күн бұрын
@@ononewheel7 ok thanks man! Awesome video, thank you for taking the time to educate and show how to deal with this.
@ononewheel713 күн бұрын
Anytime.
@dustinrichards84013 ай бұрын
Do you know which way the jutter spring goes in? I can’t remember
@ononewheel73 ай бұрын
My manual is showing the 2009/2010 basket which has no judder springs but looking at rocky mountain part#16 goes in first then 15 second then the clutch pack they kind of sit against each other acting as a spring hope this helps
@dustinrichards84013 ай бұрын
@@ononewheel7 yeah one is a spring that has flat side and the other has a flat side and a like a rounded side, I put in new clutch plates and fibers and I have tension when I pull the clutch in but when I put it in gear and let out on the clutch is doesn’t move
@ronaldwalters47154 ай бұрын
i have a 2024 yfz 450r only had it for a week havent put a dent into the break in... rode it only 4-6 hours so far they require 15 hours break in time.... anyway from the day i got it i noticed it wasnt downshifting smoothly like id have to rock it back and forth until i hear a click to move it down each gear when at a complete stop....i was wondering what the problem could be the dealer said it sounded like a bent shift fork but people told me its hard to bend them and theyve been riding for years.... anyway another person told me it could be the clutch plates and another said it sounds like a pressure plate problem i was wondering what your take on this situation would be..... on a side note the dealer said my machine has a 6 month warranty so its covered through them up til that time but a month before my warranty is up im going to swap it out like you mentioned here but the engine is covered for 3 years minus the clutch go figure. you have inspired me to finally get one lol
@ononewheel74 ай бұрын
Thats weird for sure. If it has a warranty id get it to the dealer asap and have them dig into it. It could be something going on with the clutch. I have never really heard of shift fork issues before
@ronaldwalters47154 ай бұрын
@@ononewheel7 im taking it next weekend and im not riding until i get it back!
@ronaldwalters47154 ай бұрын
at first i thought it just need broke in
@ronaldwalters47154 ай бұрын
@@ononewheel7 my son in law came and took a ride on it he found the problem the clutch wasnt engaging or disengaging right so all he had to do was adjust the clutch lever and its been shifting real good
@ronaldwalters47154 ай бұрын
i forgot what he said was the problem thats why i said engaging or disengaging anyway the problem was fixed
@ronaldwalters47154 ай бұрын
what year will the rekluse auto clutch system work for my 2024 yfz450r
@ononewheel74 ай бұрын
All years
@salvatorepavese53805 ай бұрын
Your videos are truly amazing. Good, congrats. I have a 2016 yfz450r, it's happening to me that after riding around with my quad for a bit and I turn off the engine for about ten minutes, after that the clutch lever finds it stuck and it unlocks if I help the fork with my hand. What could be the cause of this, do you think this upgrade can solve the problem. Thank you
@ononewheel75 ай бұрын
Usually when it’s hard to shift it can be because of grooving in the clutch basket. You may want to open up the clutch and inspect it all.
@salvatorepavese53805 ай бұрын
@@ononewheel7 Thanks very kind.... I will check
@ononewheel75 ай бұрын
Let me know what you find.
@salvatorepavese53805 ай бұрын
@@ononewheel7 I removed the clutch. Everything ok, but a few days ago I changed the cable because it was broken, but the cable was resting on the muffler. When I turned off the bike the heat caused the sheath and the cable to stick together... Now I passed the cable through the cable gland... All solved.
@ononewheel75 ай бұрын
Glad you got it fixed
@user-tg7mi3yc2g2 ай бұрын
My clutch on my 19 makes noise when I let it out. Been like that awhile , is that normal ?
@ononewheel72 ай бұрын
Without hearing it it’s hard to say. I’d open it up and pull the whole clutch out and inspect everything. If you can send me a video on facebook/instagram or email.
@user-tg7mi3yc2g2 ай бұрын
@@ononewheel7 I just have messenger , but I can search you. What’s your name on fb. Or your email ?
@yukon_2a_ftw3 ай бұрын
Hey so i just did this to my 2018 with all part numbers you provided. I followed your video step by step along with other homework. When idling i can hear a slight sound from clutch area and when clutch lever is pressed sound goes away. Comes back when letting go of lever. Took it all back apart to double check everything. Everything looked good. Is it normal to have slight sound? I cant remember hearing anything before. But then again my dasa full exhaust is loud lol.
@ononewheel73 ай бұрын
Is the clutch working as it should? The only thing that can happen is the basket sometimes will not fully seat on to the shaft but you would have no clutch pull if that were the case. If you looked it over then id imagine its ok usually it only makes sounds when the basket is coming apart.
@yukon_2a_ftw3 ай бұрын
@ononewheel7 yes works perfectly. I made sure to seat it all the way.
@ononewheel73 ай бұрын
Ok id say your good it may just be a normal engine noise
@yukon_2a_ftw3 ай бұрын
@ononewheel7 ok thank you! Happy riding
@ononewheel73 ай бұрын
@@yukon_2a_ftw thanks man you too
@dodgecumminsguy94992 ай бұрын
Question. I just bought my yfz in september and maybe have 40 hours on it with no clutch problems. Is it possible to just swap only the basket? Id like to go the most reliable but cheapest way possible. Any recommendations?
@ononewheel72 ай бұрын
Yup thats the only issue. Swap it out for a 2009/2010 OEM clutch basket and washer.
@dodgecumminsguy94992 ай бұрын
@@ononewheel7 could you send a link to where I could buy it? If not I'll look around but I appreciate the fast replies!!
@ononewheel72 ай бұрын
@dodgecumminsguy9499 contact BNR Motorsports he sells the kits.
@dodgecumminsguy94992 ай бұрын
@@ononewheel7 will do, thanks for responding, I appreciate it