Given that the M9 is a bayonet instead of a utility knife it passed pretty nicely. I'm sure it would do its primary job even better.

Went from FN to BS.

picked one up as an all-purpose knife, and put the money down for a sharpening. Easily the best knife I’ve purchased. The reliability and durability are impeccable and the added sharpness really no pun intended gives it an edge.

The saw is meant not for cutting wood but cutting aluminium if you were in a downed aircraft

lol wtf were you doing from 0:10 to 0:19 😂

I know a couple people are kind of giving you the piss about how you're testing this _combat bayonet_ . . . but realistically speaking, any rigors exposed to any knife is a good test of it's overall abilities. If this thing can withstand ridiculously caveman-level abuse beyond what it's technically designed for, I'd say thats certainly not a mark against it.

Is it a fully semi-automatic tang?

Really enjoyed the video and I have to say I am really happy with how well this knife held up! I am glad have a vouched for it in the past and still do!

That was brutal to watch but very informative. Thank you!

The Army discovered in Viet Nam that a sawback on a spine used in CQC will probably get stuck and remain there until the battle's over. Compare the M9 to a Kabar or Case fighting knife. Same design overall, but the M9 has a muzzle ring, bayonet mount, and lower quality steel.

Mayor, I learned some capabilities of a bayonet from you that I really would have not thought about. This was an entertaining presentation without any extraneous commentary. Good job!

nice stand-on test...that gave me a lot of confidence in the piece

i also wear glasses when cutting lime,safety first :)

You did a torture test video on the Cold Steel Carbon V Kukri, and that was amazing. My friend and I each got one after that. I would like to see you test the Tops Knives brand Bushcraft Kukuri 7. Good job on your videos, and as always, Safety First.

Stabs a Casing Box--stab a helmet with the enemy wearing it,or stab an enemy wearing body armor... Stab an empty metal canister-Open cans for food,or just destroy aluminum,use the SAW edge to cut wire,etc..... Break Concrete or Cinder-Block- Chop Concrete or Cinder Block-- Break enemy face-Break or chop a bone with ease,Break Glass if under water,or break glass in case of emergency..... Standing Pressure- Old Stories say this knife had 49 designers-only a few designers made it(I think 5 ).,It was to withstand the weight of 200-500 lbs(I think it was up to 500 pounds). Drop test-drop tests were up to a couple flights(5 Story Heighth-someone correct me if I am wrong) to with stand the drop from a higher height. It’s a decent knife.I still like the Old AirMen Knife (Pilots Knife like my father had when he was in AirCrew in the Navy) and the KaBar(and KaBar story origin is very cool) Facts

I have this exact knife, how would you guys suggest to sharpen it properly?

Thanks for doing this. Instead of getting a dedicated survival knife I got this bayonet instead which goes with my rifle too! Like you said one can sharpen to their heart's content.

What i am interested to know is if this knife can do wood crafting, batoning work? as it's not full tang n all..

Great torture test. I bought one just because, some years ago before they changed the handle design. So far I've just chopped up my apartment a bit (one great thing about renting).

Oh By the way, The Bayonet was never intended for or designed to be a survival knife until the M9 was introduced in the late 80's I guess, not sure, but what a kick ass knife the US jumped to from the old M8 Vietnam bayonet.

hands down best channel I've seen in months! If you get a chance, test the cold steel oss if you would

Awesome video my friend . I have this knife and it’s awesome for cutting through chainlink fencing

“A pocket saw or a sawzall” lol

There is a wise colonel who takes choppers down with one of these.

Mr. Mayor, would you please do a test on the Ontario OKC 3S Bayonet. It's a great knife and bayonet, I don't think it would survive your test, but I would be interested to see how far it would make it. (I think the handle would either get loose or come off, but I think the blade is made of the same stuff as the Ontario M9 Bayonet blade)

This was impressive! thanks for the Video. Can you do your tests on a Timber Rattler Western Outlaw Bowie?

I can assure you the plank won't hit back

Uncle Sam already beat the living daylights out of this thing during testing and it survived. We already knew it would pass your tests (**)!

When you did that propane tank test did you think about it creating a spark and possibly igniting the residual gas in the tank? Even when they're empty they still have some propane left in them.

If you haven’t already, you should test an ak bayonet

Watching again on the Fourth of July, 2018. You need to make more knife torture test vids!

8:37 the grain of the steel ,the sign of a quality knife

I'm from Ontario :) I wonder if they're legal to get where I'm from. I'll have to check. I'm not really a knife enthusiast but this knife seems really cool.

Good review, been looking to get a bayonet for my AR.

that saw edge works great for creating notches for traps

Hey, awesome video! Could you maybe test one of those elemental knives (the real life csgo remakes) m9 bayonets, to see what the quality is? They are made from 420 stainless steel, but i highly doubt they have the same quality as this knife... They look really cool though, so i would like to see what the quality is like, and you seem to be a guy that knows a lot about knives ;) cheers!

Do a torture test with the cheap SZCO M9.

nice sacrifice I am pleased with it

is the handle hollow? is it full tang? if not, how deep does the tag go in the handle ? can anyone please answer these questions?

Great review! It's now at the top of my bayonet wish list.

Very fun and informative video. Would you consider testing the RUI 32067 Bayonet as a comparison?

Amazing review as always. Thanks for sharing.

I love how he whacks that board-dude.

I like this test. I shows how it would perform in a variety of situations

Good video, Is possible to test the Esee CM6 in the other video ?

the saw on the back is for notching when making traps

But did you, ....... "put the lime in the coconut and drink 'em both up"?

FYI even when it's sharpened it still struggles to cut wet toilet paper and only has good value when it's used with its sheath

Damnit i want that damn Bayonet.... But over here in the uk they cost a fudging bomb.... Guess ima have to make one.... Gotta make one more durable than this one...

The saw back is designed for notching for snare traps, figure four traps and what not

Good video man! I would buy one for sure. Keep up the good work.

has a flat screw driver too by the wire cutter

Ihave this M9 bayonet. I bought it at the factory in western New York. JUST DON'T BEND THE KNFE SIDEWAYS!

Good stuff,the M9 is a beast,.Good video friend.

M9 and Glock FM78 are my favourite knives/bayonets.

any chance we could get a torture test with the m7 bayonet?

I think the sharpening angel on my M9 bayonet is at least 30-35 degrees angel . My bayonet is not Ontario its Lan-Cay

Where did you buy this knife ?

Hot thanks for fascinating review. Getting this one tomorrow, aaand... Subscribed, of course.

Seem like a cool dude and you have great content.... subbed🤘🏼

Do one on the Ontario M7 Bayonet!

Never get into a knife fight.

I bet it would be really hard to break off the circular thing(for gun mounting) off. Hmm...

Since a bayonet is not meant to be sharp, sharpening the blade wouldn't diminish its toughness or durability ? Impressive tests, by the way !

Where do you buy this?

Thanks I was wandering if it was worth it now I know .

Thanks for the video 👍🏻

is there any different between the bigger sawback of m9?

Can you do this with the Ontario USMC bayonet?

Okay gang, I have a M9 that only has “ MK041657” mark on it instead of M9 US...so what do I have? Foreign?

If I remember right I think the saw on back is to "saw" through the aluminum hull of a helicopter .

Where can I get one at?

I was under the impression the wire cutters was for cutting threw fences and barbwire type of stuff. ?

I'm shocked his mother is letting play around with knives

Love the shade color!

old school badass

I do have to give you credit if a knife survives your tests its one hell of a good knife or bayonet

How about testing the older Phrobis/Buck M9 variants to verify the original durability?

The saw back is probably to hurt enemies even more on the way out

Great and awesome review :)

For SAFETY ISSUES ALL sharp blades from a manufacturer Is SUPPOSED TO BE NOT very sharp You supposed to sharpen that once it’s in your possession. It keeps the Mailing Manufacturer or Seller from gettin sued invade there is a shipping or mailing problem,, I.e. -shipping accident -postage accident Facts

very informative!!

Great review! Thanks for tearing it up so I don't have to!!! :)

My bayonet literally can’t be sharpened I would bet $50 on it

had an m9 bayonet dopplar at one point, that's how u know I went too far into cs

Safety first, my friends

*Smashes knife on rock* “yea the edge isn’t really that good”

Good vid. Thanks!

I really do enjoy your reviews.

The version with big saw tith is for wood smaler ones are for metal

where can i buy this knife?

Sweet test. Thanks!

Brother you seemed really tierd or sick in that review, must of been hotter than H- E-double hockey sticks that day or something;)

Mayor please help me you recomended this knife for skin a deer or cut some food the edge retention its good for hunting i want buy one your opinion realy can help me saludos desde México

You can sharpen it but it’ll still perform the same mine is a okc

Well what do you think will happen when you slam a knife against a cinder block of course it’s going to dull the knife. Good test my man!

I'm impressed will be getting one. Thx!

which one would win M7 or M9

Do You know if those elemental knives are made of 420 hc?

if that's the knife I believe it to be I'm pretty sure the saw on the back is made more for metal its a common mistake