Hi, Have you considered using PVC Form Board for your baseboard? It is less resistant to warping (bending) after the track is laid and not affected by water. It does not perish neither affected by wood rot and is very durable. Cheers, Michael.

Great video and layout. Thanks

Thanks for showing us how you do things... in detail. I like the patter, very informative.... But I always worry about those sleeper gaps where rails join. You will poke some sleepers in, won't you? All best for Saturday's Open Day. Would be there if I wasn't on the other side of the world.

I love AnyRail, paid the full price given the size of the loft layout I'm making a start on and haven't regretted it! Just one more quick tip, when shortening flexitrack, if you hold down shift while you shorten, it will keep the piece of track nice and straight for you even if your mouse moves a bit!

Hi Tris, another quality video. This one is a good introduction to the hobby

Really nicely put together video and really good steps. Looking forward to seeing the end product

Glueing without protecting the floor... Suspicious. ;)

Lovely video Tris, can't wait to see the finished product!

Hello. This my first time viewing. I must say your layout construction is lightweight but the track plan is impressive. My most interest was the cork sheet you cut up into multiple strips. Would i like to purchase this. My concern was such narrow trackage and i know this from ATHEARN trains trucks & many others with turnouts & curved radius. Peco is popular & good track but i don't like you have to keep driving holes into the rail ties that's annoying when i can be driving the nails & holes the can be ready made. Good video will continue to view. 🎥👍✅

Hi Tris. More good tips on building as well as the software, thanks. Have you watched Charlie's bloopers really funny he has a good sence of humour, especially the expandable foam..... Have a good weekend

1:01 That's cuTTe(!) D: :3

Wow Tris! This is so awesome!!

Looking good

WOW so glad I found your channel, I have watched a few channels that I found good and helpful, but this was a great video, showing how to make track plans etc... I am just getting back into the hobby after 25 years away, gonna collect the standard 00 Locos etc ( I have in mind what I want ) for future when I have alot more room to make a display, (Pecketts and class 08 shunters are my favs) but gonna for now do a 009/N gauge layout and this has helped me no ends to think about my future plans! thank you! just subbed and gonna watch more content through today :)

Hi Tris. I have used a fibreboard that is available from the well known large Swedish D-I-Y store. They are available in sections of 101cm x 60cm and are 3cm thick. Each section only costs £7. This type of baseboard consists of a fibreboard top and fibreboard base, one side being coated in white acrylic paint. The sides have plastic strips and the inside consists of a paper/card filling that is honeycomb structured. The paper is 75% recycled (minimum). The framework is made of particle board which consists of amino-formaldehyde based resin that is used to bind the particles together. Particle board framework needs pre-drilled holes that are 1-2mm smaller than the screws so as to allow it to get a grip on them. DO NOT self-tap as framework will split over time. Screws may eventually loosen so may need tightening every once in a while if structure is being used for supporting moving parts (not trains), in which case specialised fasteners can be used which are known as confirmat screws. The advantage is that unlike plywood etc., they do not bend when moved, and can take weight without distorting as they are constructed for use as table tops for which supporting legs are also available. They are not that heavy to move around and are ideal for exhibition display layouts. Take a peek at the YT channel Iron Horse Railways as Craig has used them for his relatively new layout. Paul. 👍

Cool 👌👍🤩

Great Video Triss

Nice :) Just a tip for future use of cork, I bought some self adhesive rolls on eBay that are already cut to size for half a track width, makes it much easier to fit down and has enough stretch for tight corners.

Great video Tris. Looking forrward to seeing how this project goes. Exhibition layouts are always good fun to watch. Very inspiring for when I start my one. - Nicholas.

I find it much easier to fit point motors with extended rods underneath the board, then you just need to drill a hole big enough for the movement. 8mm is ample

Circuito cerrado resto y curvas y semáforo de trenes y maquetas de los trenes y cuadrante de los resultados de la estación de tren

Más videos de la estación de tren de trenes

Hi, I would be interested if the Board stays flat. Fingers crossed I hope you have better luck than me!! I have tried using that thin pine strip on 3 different base board projects. Similar construction to yourself and without fail it has warped over time. I have tried using it to make I beams with 5 inch high (wide) 6mm osb board and that bent due to the pine. More recently a base for my Tyne Dock Iron ore loading stage and that is only 220mm by 1920mm and it has twisted slightly even though I applied yacht varnish. Great Fun little layout and video. Regards Steve

You will be able to get 0-6-0s round that. I know. I have a layout with tighter curvs

Hi. Is the framework 18x44mm softwood. Thanks

Looks great. Do you have the product code for those point motors please?

Pedido de la cajas de los trenes y maquetas de los trenes y trenes de alta velocidad y cercanías regionales y nacionales y internacionales y de la estación de tren y bocetos de trenes y maquetas de los trenes y circuitos de de los trenes y vía completa

If you are looking for a layout builder Xtrack cad is free with no limits

Please give me the name of the track app.

Does your cat have a name?