' nn k

Karthikeyan

ՀՀ

Delete this video it can affect us

... you hearted your own comment? Really?

🤣

@@alcapone5990 damnnnnnnn

@@ravinupreti8733 yeah when your mother was young, that's how you got into life

😅😂😂😂

David Murphy 😭😭😭

Its the old hole in the top trick. Notice how he holds the lock in the exact same spot without moving it at all once he starts to touch the magnets . This is because he cut a hole in the flexible top ,you can see the top is not solid. He is trying to hard to not move the lock to expose the hole he made where the key is going into the lock . He only tilts it slightly but never shows the bottom or never moves the lock from its spot .

@Ricky Barber At 1:31 he gets careless and the latch moves into place very subtly, even with the magnets still stuck to the padlock. Fake

@@Sertao2013 there are other videos doing this same trick & it 100% DOES WORK. Their is a Short’s video on the Tooltips channel & he does it too. He has the lock flat against the palm of his hand & u can see there is nothing else that could possibly cause the lock to open besides the magnet.

@Ricky Barber Yes he shows the bottom of the lock two or three times buts after that he shows the magnets once the magnets are gone the video is edited and the lock is magically setting on the table at :40 seconds and its never moved again from that spot . While the video was off that's when the hole is placed in the counter top . Notice how the lock is never moved from at spot once you see it appear already setting on the table . Notice how you don't see him setting the lock on the table and notice how its never moved to the very end and its still not moved .

@@RKLS90 Link a video that shows this . I want to see if they splice the video like they did this one .

Yeah but even so the lock would not open if the cylinder wouldn't rotate. And the upper pins would have to be magnetic, which would mean they'd have to be made out of iron but not steel, and also it would mean that the inside pins would have to NOT be magnetic cause otherwise they simply would stick to the other halves magnetically and travel with them. Even with iron pins it would still not be possible in the real would to exert enough force onto those tiny thingies to travel against the force of the springs that would normally sit in a lock above the pins. Absolutely totally impossible. It would not even be possible if you could hold the magnet straight up to them, let alone from a distance and right through the lock body with the springs in fact actually sitting inbetween. But the fraud we see here doesn't move the actual cylinder, he has the latch moving independently from the cylinder. In a normal lock, the latch would be equally spring-loaded and would have to be replaced by something made out of iron. Now as the latch is a bigger part that half a pin, it may be possible to move it if it were replaced by an iron part, possibly it may even be possible against the force of a very week spring. That's if it even was a real trick on a doctored lock. Bit what he actually does is move the latch with this finger on the backside that we don't get to see, and he is careless, as someone else has pointed out: at 1:31 the latch already moves magically before the magnet even comes anywhere near the lock.

It actually looks like the latch holding the shackle moved, so I don’t think he was attacking the pins.

Just going to add onto what Harrick said, even if someone did try and turn it, and the magnet was strong enough to pull even the top pins down the springs will jam that lock so fast. Iv never seen a magnet compress springs without a load on top of it

I think this would'nt work for good quality locks.

Doesn't need a hole. A cheap lock or shaved latch will do the same thing.

The magnets he had you can find in any microwave I've got several of them and they are fairly strong

Idk

kye tum. chor ho

Speakers have them

Yeah so now all you need is about 5 microwaves that you don't use just lying around.

But only thieves with multiple magnets.

A thief would use anything to break open a lock if they really wanted what was locked up.

@James the Truther Magneto would have no trouble with any stinking padlock.

Wow!! I'm trying this tonight. My neighbor has lots of good stuff I can get!!! Thank you, God bless you!!!

@@alecjo2307 Good luck with that. After watching this video, your neighbor bought a shotgun.

It is fake

A lock that cannot be opened by a tool! kzfaq.info/get/bejne/iLGCopxos5e0en0.html kzfaq.info/get/bejne/atyDm7No18-2oX0.html

I was why it didn't work

@James the Truther it won't work on handcuffs as they are made from stainless steel and a magnet won't stick to stainless steel

It doesn't matter what the body is made of as the magnet is pulling the locking pin out of the shackle gate. You can see this at 01.27. The pin locates in the gate in the shackle. The shackle on this lock shows 2 gates but the locking pin only actually works on one side. If it had locking pins for both gates this method would not work.

@@HILUXCHAINSAW Nope, if that were true than a simple high-grade magnet would pull the pin, and so no need to ram the remaining magnets together.

Doesn't matters what casing is made out of.....it's the mechanisms that are needed to be magnetic... They are steel

How are you a doctor and believe this crap?

People don't need to cry hey its working only on non steel.we have methods for steel locks too its just a childplay u have seen in this ok .

Joe Quintana 😂😜😇

Did it work

YES YOU CAN

LOL

ya think his hands look bad, wait till you see his face.......

gay

And the pins are on the opposite side to where magnets stick to this brass?? Magnet.

@@kev.6149 they must be, eh?

@@kev.6149 they must be, eh?

Just a slightest of taps with a piece of metal on the right side of any Chinese lock and they pop right open 😂 freaking jar of pickles is harder to open than Chinese lock

I could open that chinese lock with my cock. 😬

@@tetragrammaton7036 Haw, haw. 😆 You naughty little bugger....

@@torbjrnlund903 lol you asked for that one. 🤣🤣🤣

@@kev.6149 I did. 😀

Got a 100 pound mag that I use for magnet fishing, going to try it using a 100 pound

How do u spell that

@@thecollector5209 LIMBO

What D hell is a neodimian mag.

Rear earth magnet.