Orange Pi Zero 2W - Is It Really That Good? You'll Be Surprised!
Рет қаралды 24,131
5 ай бұрынThank you / @pcbway for sponsoring this video!
🔥 Get $5 off your first order with my referral URL: plati.ma/go/pcbway-4sRz4CKpIdk 🔥
Don't forget to check out their promos such as 10x PCBs for $5 🤘
Correction: 512MB RAM on the Raspberry Pi Zero 2W sorry**
❤ DON'T FORGET TO LIKE AND SUBSCRIBE! ❤
This was a way better product than I expected, and I'm pretty damn happy with Orange Pi products (sometimes called OrangePi). The Pi Zero 3 has the same CPU but different form factor, so I likely won't try it, but from what I understand someone is going to benchmark it and add it to github.com/geerlingguy/sbc-re... in the near future.
Here's the benchmark results (Geekbench 6) for this SBC: github.com/geerlingguy/sbc-re...
The benchmarks actually show better results than an Arm Cortex-A55 in that list, but I am thinking that may be due to the heatsink? Else likely due to the LPDDR4 RAM.
It really is a shame that there is no eMMC or NVMe on this. It might be available via a custom breakout for that 24-pin FPC, but I've not seen one yet! PoE on that expansion/breakout board would be excellent too!
And as far as the size goes, I am basically arguing that;
- Stamp: eSBC (eg Mango Pi mCore, SiSpeed M1s)
- Stick: eSBC (Milk-V Duo, Pine64 Ox64, LuckFox Pico)
- Half-Card: SBC (Orange / Raspberry Pi Zero 2, Mango Pi MQ-Pro)
- Credit Card: SBC (Raxda Rock 4SE, Rasp / Orange Pi 5, Milk-V Mars)
- Compute Module: .... not sure yet. It's an SBC like those two, but it requires break-outs like eSBCs... Food for thought!
🔗 Resources
- Buy One Here: amzn.to/3vucIQ4 (Affiliate Link)
- Or Without Expansion: amzn.to/3vtcMiY (Affiliate Link)
- Blog Post: plati.ma/orange-pi-zero-2w/
- Product Page: www.orangepi.org/html/hardWare...
- Reddit Discussion: / orange_pi_zero_2w_i_wa...
- Documentation: drive.google.com/drive/folder...
📽 Related Videos
- ESP32-C3 Riser Part 4: • Miniature RISC-V Modul...
- WS2812B 8x8 Panel Part 1: • All the other NeoPixel...
- Humane Animal Trap Part 1: • Can We Make Animal Tra...
- PinePower: • Pine64 "PinePower" 120...
- LuckFox Pico: • Luckfox Pico - Milk-V ... (low RAM usage)
🛒 Shop: shop.plati.ma
💵 PayPal: paypal.me/PlatimaCash
📺 Other Channel: / @platima
📷 Instagram: / platimatinkers
🌏 Reddit: / platimazero
💳 Patreon: / platima
Chapters
00:05 Intro and Overview
03:02 Looking at the Hardware
05:32 Specs at a Glance
06:02 Software Options
08:59 GPU/VPU Support (NOTE: Enable it with `orangepi-config`)
09:33 Note for Android Images
09:59 Testing Overview
10:41 Power Consumption Test
11:36 First Boot
13:18 Micro Linux (pre-flashed to SPI)
14:15 Boot to Debian on SD Card
17:02 Trying out the UI - Chrome, KZfaq
19:28 Looking at the CLI and Software Specs
20:47 Temperature Test with Thermal Imaging
21:46 Second Boot - Much Faster!
23:15 Preparing to run the Benchmark
24:19 Well Done Orange Pi
25:09 Running Geekbench 6
26:40 Thank you PCBWay & Outro
27:51 Geekbench Timelapse
#Platima #OrangePi #SBC
@chuxxsss 5 ай бұрын
Gave you a thumbs up. Happy New Year.
@PlatimaTinkers 5 ай бұрын
Thanks mate much appreciated and same to you!
@user-wm4oe4kk7t 2 ай бұрын
Thanks a lot for sharing!
@PlatimaTinkers 2 ай бұрын
Not a problem at all mate, thanks for the engagement!
@SpaceEnthusiastRich 5 ай бұрын
Thanks, great video!
@PlatimaTinkers 5 ай бұрын
Cheers Rich, much appreciated!
@Razor_Burn 5 ай бұрын
Nice to see you back reviewing ARM SBCs and the OrangePi 2W as its an upgrade in performance than the RaspberryPi version and I see the H618 used in a few other boards from BananaPi with Sipeed just releasing one themselves. My 4gb has been in its box as was waiting on time to get it setup. Be sure to use cooling as Allwiner chips suck and this one will get hot... Great video!
@PlatimaTinkers 5 ай бұрын
Hey I'm trying to stick to RISC-V, but waiting on RV 1.0, so going back to ARM since I've got still literal dozens to get through haha. Honestly, I cannot tell what the difference between the H616 and H618 is? Thanks for the comment/engagement and input! Cheers
@styauJ Ай бұрын
Hey bro😊 compatible gpicase?
@semaph0re 4 ай бұрын
GPU works on the 2W, just make sure to enable GPU in the orange-pi config utility, as it is disabled by default on this device. The GPU is Mali-G31, so it uses Panfrost, I have been able to render 3D scenes with shaders and stuff just fine.
@semaph0re 4 ай бұрын
also re-do your KZfaq test after enabling the GPU.
@PlatimaTinkers 4 ай бұрын
Oh you legend - I did not consider checking the config tool, I was going to modify the DTB by hand haha. Yeah I'm planning a "Part 2" covering a bit more, and was going to work out how to resolve the GPU issues along with testing 4K there. No idea why it's off by default! Much appreciated.
@semaph0re 4 ай бұрын
@@PlatimaTinkers yeah, it took me a long time to figure out that the GPU was disabled by default, maybe it depends on the image that is used, at least on my image it was disabled (Orangepizero2w_1.0.0_ubuntu_jammy_server_linux6.1.31).
@PlatimaTinkers 4 ай бұрын
@@semaph0re Yeah quite possibly. Even the official docs still say it's not supported though =/ Odd. Ah well, wonderful find!
@salvadorGC338 4 ай бұрын
@@PlatimaTinkers For some reason it is off by default on their os lately, the same happens on the Orange Pi 3B por example
@McGivrer 3 ай бұрын
I am also impressed by this tiny SBC, (right now using it to browse and comment this video as an experiment) Ubuntu image is pretty good. Thanks for this shirt and good review. I'll try soon to run the retropie/recalbox on it, very curious to see results ;)
@PlatimaTinkers 3 ай бұрын
Oh wow that is excellent, nice work mate!
@ronalerquinigoagurto555 Ай бұрын
Good review maaate
@PlatimaTinkers Ай бұрын
Cheers!
@DanielRumbacher 5 ай бұрын
as a real australian i would have expected you to compare these tiny pocket socs to a huge australian deadly spider :)
@PlatimaTinkers 5 ай бұрын
Hahah I could definitely do so, but honestly the two huntsmans that live in/around my workshop are approx 6 times the size of this SBC. The one I last saw inside was missing a leg from a fight with a bird, but its stance was about CD sized.
@vladsnape6408 7 күн бұрын
@@PlatimaTinkers Huntsmans are not deadly, unless you are an insect. I presume @DanielRumbacher was referring to funnel-web spiders. I am not expecting you to include a live funnel-web next to any small SBCs in future videos, unless you really want to do so.
@PlatimaTinkers 6 күн бұрын
@@vladsnape6408 Yeah got two huntsmans that live in my workshop, each missing a different leg from a bird fight hah. And they're not deadly, but it can make ya fairly ill! They don't usually bite at least.
@menukaramanayake6786 4 ай бұрын
Hoping to buy one, could you do a video where you install other OSs ? Like Fedora OS (I heard that it can be installed to Rsp Pi not sure tho)
@PlatimaTinkers 4 ай бұрын
It's unfortunately not easy - the OS needs to be ported to the hardware (DTB), and an image created for the SD card. Your best bet would likely be sticking to the releases, unless you know exactly what you're doing!
@zk_6312 5 ай бұрын
Looks good. This is what the raspberry pi zero 2w should be. I was quite disappointed with it only having 512mb ram. This board is excellent though except for the initial bootup time. I think this would work great with klipper. Well, I finally bought a 2gb one. At first I thought none of the images were working as I kept getting an error mounting the sd card. I was using Win32 Disk Imager. I switched to using Balen Etcher and was able to get the images to work. So far, it is okay, but I have done anything with it other than test the images.
@PlatimaTinkers 5 ай бұрын
Yeah seconded hey, and DDR2 even more so! Definitely good for Klipper, but that first boot time does make sense to me 1) had to expand partition etc, 2) slow SD card!
@youtubeviewer7077 5 ай бұрын
hot exposure
@PlatimaTinkers 5 ай бұрын
Cheers mate
@yorks_atheist3069 5 ай бұрын
toyed with getting these for Home Assistant voice satellites but drivers for respeaker hat only for raspberry pi version
@PlatimaTinkers 5 ай бұрын
Hrmmm, shouldn't be too hard just to compile for most boards? github.com/respeaker/seeed-voicecard looks like it'd support most common ARM boards.
@reixko5192 5 ай бұрын
Could you please confirm if both USBs have both data and power capabilities ? bcs according to their website, both should be able to carry data too 😊
@PlatimaTinkers 5 ай бұрын
Yep you can, but USB0 (near 24-pin connector) is set to 'Device Mode' by default as that's usually the power supply, and USB1 is in 'Host Mode'. This is page 125 of the manual, and you can change USB0 config using `orangepi-config` if need be as it steps you through there!
@unknownsauce3768 4 ай бұрын
Whats software support like? Will anything rin natively or is ot only Oranges own images??
@PlatimaTinkers 4 ай бұрын
Pretty damn good to be honest. Orange Pi are an Armbian Platinum Sponsor, so most models get fully endorsed Armbian releases, but they also put out ~8 images for each board themselves, eg Arch, Android, Ubuntu and Debian, with CLI and GUI versions where relevant, and sometimes with 5.10 and 6.1 kernels too! Plus extensive doco, eg the PDF for this board was 319 pages!
@oda0111 4 ай бұрын
Does it work with all the OSs the regular Zero 2 can? I need one for a Tilt hydrometer setup (Tilt makes their own OS off of Raspberry Pi OS for this purpose that is Pi 2,3, 3+, 4 and Zero compatible according to their documentation) and wouldn't mind having the extra hp this comes with.
@PlatimaTinkers 4 ай бұрын
Both processors are Cortex-A53, so the software should work perfectly, but the device tree might be slightly different. I expect it as close as possible, so the images _might_ Just Work™ but I'd use the official Orange Pi image, then just copy your software across... unless you've got a custom build of course! Else maybe just jamming the OPi DTB into the RPi image might work!
@oda0111 3 ай бұрын
Second attempt at posting a reply, for whatever reason the first one didn't stick. The custom image Tilt made for the Zeros, 2, 3, 3+ and 4 did not work. I kept getting and mpt4 mount error. Funnily enough I get the same error when I try to boot with no SD card installed. The only thing that worked was the Orange PiOS (Arch) image. Tried installing a regular Pi OS Lite, Pi OS in both 32 and 64 bit with no success. I like the idea of a cheap and powerful Zero 2w but the support is not nearly close to what it needs to be. @@PlatimaTinkers
@PlatimaTinkers 3 ай бұрын
@@oda0111yeah KZfaq is good at eating comments sometimes. So annoying. That's really interesting and good to know. I'd expect that is going to be something to do with the device tree (DTB). If you can get the Tilt image, and use the DTB from the official image, that might work. The other option is that you might be able to modify the u-boot or related boot options, as it might be looking for a specific block device or connection to boot from, which is different on this.
@registromalplena2514 5 ай бұрын
I'm wondering why your raspberry pies keep dying, is it because of a lot of read rights to the storage or overheating or something else? I am very interested.
@PlatimaTinkers 5 ай бұрын
I've got no idea, but over the last 2-3 years I've gone through a half-dozen Pi Zero's. It's only those that die, I've never had another SBC/eSBC fail, and they're in a really good enclosure, indoor, running off well-regulated power. Having spoken to others on Reddit, apparently it's actually fairly common.
@Alex-em9ij 5 ай бұрын
What heatsink you used for cpu?
@PlatimaTinkers 5 ай бұрын
I just grabbed a small spare one I had in a box. I've ordered some for stock, so keep an eye on shop.plati.ma! Cheers
@cjlowe1650 5 ай бұрын
Luv you're vids. Have 4 Opi zero 2w. 2-1g , 2-4g. And expansion boards for all 4. Need to know diff with loading the os's. Also had issues with loading Rpio ontop of opi zero os. Diddntt work. Can you go over difference between the 2 w and also the Rpi 0 2w? Also best plce to load os and where to mount os between the 2 and issues where the antenna are best placed. Plus had issues with loading Rpios vs Orgpios,? Also is the a true Dietpi Oxpi vs diet pi over iox. Also any ideas of how to load dietpi orgli os for RTSP CAMERAS STREAMING? THANKS.
@PlatimaTinkers 5 ай бұрын
Hey thanks for the comment and support! I've not tried Orange Pi OS, as I'm not a fan of Arch. The Orange Pi Zero 2W wipes the floor with the Raspb Pi Zero 2W in my opinion; 4K HDMI output, USB-C, heaps more RAM, faster RAM, Wireless-AC and BT5, SPI flash, etc. Probably cheaper too! Antenna is a hard one; depends on your case or layout. But most of the time it can go pretty much anywhere, just vertical. RTSP camera streaming would be best done with ffmpeg / V4L2. You'd need to learn a bit about it, as it can be slightly complex, but there are some pre-made packages out there that you might find in the apt repositories. Eg github.com/mpromonet/v4l2rtspserver which is super common and easy to use. To load the OS just use Balena Etcher or similar on to the SD card. You can program the embedded SPI Flash but it is only 16MB so barely fits much. Maybe RT-Thread haha
@cjlowe1650 4 ай бұрын
Thanks for the reply. I've used RTSP on pi zero w and zerow2 for a few years with no issues. And capture the feed on a Pi4 8gb of 4 streams in Shinobi. I had an issue when first setting up Debian os from Orange pi site when first came out. Ill try it again.
@PlatimaTinkers 4 ай бұрын
@@cjlowe1650 Oooh how does Shinobi go on a Pi4? I've got it running on a little x86 NUC but it struggles. Yeah the current image seems to work well!
@cjlowe1650 4 ай бұрын
@@PlatimaTinkers i have it in an Argone one case with thee SSD bottom using a 2tb ssd. Capturing 4 zero w2 RTSP cameras streams it run great. When I ran it on the SD card it was awful. So the SSD really makes a big difference. Thinking of upgrading to the Pi 5, 4gb or 8gb. Just to see if it can add up to 8 cameras using pi zero2w RTSP.. have pi5 4gb now , waiting for 8gb setup just shipped Friday from Vilros. May try 8 cams on current pi4 8gb setup since I want to really use pi5 for more power options. Also got SSD bottom hat from pimoroni for the pi5's. Will try 2tb and 4tb when I get the time.
@PlatimaTinkers 4 ай бұрын
@@cjlowe1650 Ooh yeah I have a few SBC cases from Argon and I quite like them! Yep SSD would make a huge difference. I'd not go the Pi 5 though; Orange Pi 5B or Raxda Rock 5A absolutely rinse it as far as performance goes from what I've seen! I've got an OPi 5 here if you want me to check anything, but I think I've only got a Raxda Rock 4SE - still better than Raspberry Pi 5 I think though hah. The 4 SE also supports NVMe onboard I think, not E-keyed for wifi like most! Might have to move my current setup. I've also got a 3 TOPS USB accelerator I need to try, but I'm considering Frigate too... tough call!
@Sysshad 4 ай бұрын
Thanks for review. Have you found out why your rpi zero dies? Is it 2w?
@PlatimaTinkers 4 ай бұрын
Thanks mate much appreciated. And nope, no idea. Yeah 2W's. On Reddit people said they had similar problems. Basically it's running fine for a few months in a little enclosure, then one day it just stops responding. Stick debug headers on it, and it turns out nobody's home. Only SBC I've ever had that's died - and I've got a Banana Pi M1 from 9 years ago that's been running Docker 24x7 nonstop and works fine still!
@Sysshad 4 ай бұрын
@@PlatimaTinkers interesting, thanks for info. Maybe it runs to hot, even when on stock settings. Shall see how my build turns out. Going to be a handheld build I'm working on. Very eager to test rpi zero 2w or even bananas or radxas variants.
@PlatimaTinkers 4 ай бұрын
@@Sysshad yeah it could be, but you'd expect it to rate limit itself, or turn off. Hitting 40-50C shouldn't cook it. I could try a basic oven reflow to see if it comes good, had not though of that. Yep just had the Raxda Zero 3W just turn up yesterday, cannot wait to try it. Very happy with both them and Orange Pi!
@peejae082004 5 ай бұрын
Does the Android TV build have hardware acceleration?
@PlatimaTinkers 5 ай бұрын
Yep it says it does - page 285 of the docs (Android 12, Linux 5.4 kernel)
@codewithsehran 3 ай бұрын
Which is better orange pi zero 2w or orange pi zero lts
@PlatimaTinkers 3 ай бұрын
Both are very good, depends on what you want to use it for!
@madr3563 Ай бұрын
the GPU is disabled in default config. Try to enable it. idk why they turn off the GPU as default settings. Maybe to reduce the power consumption. But if user need to enable it for further project, OFC we can.
@PlatimaTinkers Ай бұрын
Yeah someone told me that just after I uploaded. Really bad design decision - alters reviews and benchmarks 😑
@jdchmiel Ай бұрын
@@PlatimaTinkers you really do need a part 2 with GPU AND with a decent SD card! I think my boots are under 10 seconds from a sandisk
@PlatimaTinkers Ай бұрын
@@jdchmiel Yeah it's in the pipe, just got about 4 months worth of other content lined up first.
@lostinwriting 4 ай бұрын
Doesn't the Zero 2W come with Ethernet connector?
@PlatimaTinkers 4 ай бұрын
Nah but you can get the addon board that has it. Eg @3:10 if you'd watched it :P
@rubiskelter 4 ай бұрын
What do you recommend for cooling this particular board? Thanks!
@PlatimaTinkers 4 ай бұрын
Hey any heatsink and fan would probably do, eg shop.plati.ma/products/raxda-heatsink-fan-combo-2513-25x25x13mm-suits-rock-5a-and-similar can probably cover CPU and RAM, however, the RAM doesn't get that hot from memory. The board has no fan pins though, so I'd recommend connecting either to the 5V pin to have it running full time, or you can probably connect it to a PWM pin, set that pin as the fan similar to on ameridroid.com/blogs/ameriblogs/setting-pwm-on-armbian-for-fan-control-a-step-by-step-guide
@geelee1977 2 ай бұрын
Is this possible to overclock, and if so, how?
@PlatimaTinkers 2 ай бұрын
Yeah it's always possible, not always recommended haha. In this case, I would say not to. 1) It is not the sort of thing to be used in any application where overclocking may be beneficial. A full Orange Pi 5B maybe, but not something like this. 2) You'd need to add custom cooling, which would probably be about the same cost as buying a second one or bigger model to get more compute power. HOWEVER. If you want to, A) Slap on some thermal compound, a heat sink, and a fan (shop.plati.ma/products/fan-and-heatsink-with-adhesive-for-sbcs) B) If using Armbian, use armbian-config to tweak frequency and voltage settings, else C) Decompile and modify the device tree (github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts) to use different dvfs or frequency settings.
@zeendaniels5809 3 ай бұрын
Install Armbian and run Klipper for your 3D printer... That's where this little guy really shines (along with its bigger sister, the Orange Pi Zero 3).
@PlatimaTinkers 3 ай бұрын
Super curious, why does everyone use Klipper? What's it do that's so great? I've only got SLA printers, so guessing it's an FDM thing? 😂
@zeendaniels5809 3 ай бұрын
@@PlatimaTinkers Certainly, FDM and mostly custom machines. It allows a lot of flexibility: Custom commands, real pressure advance, total control over acceleration... And it can run on a potato (on the machine side). The best thing is that any change you make is applied on the fly, no need to recompile the firmware on the machine.
@PlatimaTinkers 3 ай бұрын
@@zeendaniels5809 ooh okay that's awesome, thanks for sharing!
@jimlynch9390 5 ай бұрын
Amazon reports: Currently unavailable. We don't know when or if this item will be back in stock. For: Orange Pi Zero 2W 2GB with Expansion Board Allwinner H618 LPDDR4 Quad Core CPU 64 Bit Single Board Computer, 1.5GHz Frequency WiFi 5.0 Bluetooth 5.0 onboard Antenna Support 4K Display (Zero 2W 2G+EB)
@PlatimaTinkers 5 ай бұрын
God damn what a pain. Links updated with new listings that are in stock. Thanks for letting me know!
@Autotrope 2 ай бұрын
How does this compare to the orange pi zero 3? Does that have the same soc?
@PlatimaTinkers Ай бұрын
It's a really really confusing topic. The Zero 3 is an upgrade over the Zero 2, HOWEVER, the Zero 2W is essentially the same as the Zero 3. The Zero 2W has more headers and expansion, but the 3 has ethernet. I guess they are wifi vs ethernet models, but Radxa made it a little easier by just releasing a 2W and a 2E 😅
@Autotrope Ай бұрын
@@PlatimaTinkers thanks so I guess that means the zero 2w plus the expansion board is a superset of the zero 3
@PlatimaTinkers Ай бұрын
@@Autotrope Yeah kind of! Zero 3 just has ethernet instead. Odd marketing haha
@r0galik 2 ай бұрын
You can easily enable the GPU using orangepi-config...
@PlatimaTinkers 2 ай бұрын
Yeah found that out waaaay later haha. Cheers though!
@darknetworld 5 ай бұрын
Each board has it pro and cons. Without raspberry release their board and idea from them. It would be other long time for people really open hardware develop board.
@PlatimaTinkers 5 ай бұрын
Ain't wrong mate!
@user-vx9ch6rs1w 5 ай бұрын
does it has openwrt support?
@PlatimaTinkers 5 ай бұрын
Kiiiiind of. OpenWRT runs fine on Cortex-A53 cores (downloads.openwrt.org/releases/23.05.2/targets/sunxi/cortexa53/) but there are no builds for that specific board or processor. It does look like some others are working on it though, eg github.com/iuncuim/openwrt/tree/master-opizero3
@pete3897 5 ай бұрын
4:12 Only 512 gig? That'll do for me! ;-)
@pete3897 5 ай бұрын
PS, that was only a cheeky dig! Like saying "There's no H in aych mate" lol ;-) Love your content!
@PlatimaTinkers 5 ай бұрын
HAH good catch! Added an edit, cheers
@anasouardini Ай бұрын
I'll be so cool if you'd build a small Linux phone using that 💘
@PlatimaTinkers Ай бұрын
Make it happen man! I'm building a small Linux fox trap haha
@DevXcode_P 2 ай бұрын
У меня лишь один вопрос, может ли orange pi zero 2w запускать систему с юсб флешки? Если да то я готов купить её прямо сейчас 😂
@PlatimaTinkers 2 ай бұрын
Yeah, technically it would be able to. You MIGHT just have to modify U-boot to enable USB - I don't recall if it is enabled by default. (Google Translate: Да, технически это возможно. Вам МОЖЕТ просто потребоваться изменить U-boot, чтобы включить USB - я не помню, включен ли он по умолчанию.)
@DevXcode_P 2 ай бұрын
@@PlatimaTinkers Wow thanks for feedback! And thanks for the translated text)) This moment with the flash drive was very interesting, since this information was nowhere to be found and I would like to ask the real owner of the board) again thanks!❤️
@PlatimaTinkers 2 ай бұрын
@@DevXcode_P Hah, welcome! Problem with USB drives though; slow. This only has USB 2.0 (although Type-C ports), so 480Mbps max. That is still 60MB/s, but good SD cards can do 90MB/s up to 300MB/s or so 🐇 This page should help you, as I think most uboot defaults to SPI -> eMMC -> SD -> Fail. linux-sunxi.org/FEL/USBBoot
@DevXcode_P 2 ай бұрын
@@PlatimaTinkers I hadn't thought about that... usb 2.0 is a big problem. Then only sd cards. Okay, thanks for everything, I will think about the purchase!
@PlatimaTinkers 2 ай бұрын
@@DevXcode_P Any time :)
@filthyfrankblack4067 5 ай бұрын
The OPi zero w2 is superior to the RPi zero at this point in time for all the reason you metioned and I can't wait for the kali linux OS to drop for this. Imagine a KALI LINUX DONGLE using the RPi zero usb otg extention for the 4 pins on the bottom using the ethernet over otg to ssh into the OPi zero. It would be plug and play kali linux with plenty of ram and 5g wifi for aircrack. Not tomention this will run edge A.I. programs like openCV way faster. It's funny that banana pi copied this with a 2gb model and then charged more. Not to say this board has everything. it is missing emmc which radxa got right. I see great future for this board though. it will cover the hole left by the RPi /mangopi, /banana/LubanCat/ Radxa/ Zynqberry, zeros have left open and elevate the entire market.
@PlatimaTinkers 5 ай бұрын
Yeah ALMOST in my opinion; it does cost a little more, and it is lacking MIPI CSI, but ho-hum You're right that it would make a great pentesting unit given it has dual band Wifi! A TPU and fixing the GPU drivers would not go astray. Do you think they'd do a Kali release for this? I expect you could grab any Cortex-A53 Kali build and just drop in the device tree.
@savekillqqpsounds8473 4 ай бұрын
@@PlatimaTinkers cost a little much? That orange pi zero 2w costs like 45 euros for the 4gb version
@PlatimaTinkers 4 ай бұрын
@@savekillqqpsounds8473 Wasn't bad - I think $50 AUD inc shipping for both the module and addon, so 30 EUR. Seems the pricing is much the same as they control supply quite tightly!
@wimvander1427 28 күн бұрын
Would be great to run kali Linux on the OP zero 2w
@filthyfrankblack4067 23 күн бұрын
@@PlatimaTinkers Well there is kali for the orange pi zero3 so it could be the case of a drop into the device tree. A video from david bombal released on odysee about bluetooth hacking I want to try. So i have an excuse to do it.
@1nikhil11 2 күн бұрын
sd cards get fried from high read write speed.. how lol
@petrklic7064 2 ай бұрын
Does this support HEVC h.264 / h.265 ?
@PlatimaTinkers 2 ай бұрын
Hey, just an FYI that HEVC is H.265. AVC is H.264. Just random names for random numbers :P But it depends on what functionality you are after. It has a H616/618 processor - datasheet at linux-sunxi.org/images/b/b9/H616_Datasheet_V1.0_cleaned.pdf - and you can see it has H.264 and H.265 hardware video decoding, along with H.264 hardware video encoding. I hope that helps!
@petrklic7064 2 ай бұрын
@@PlatimaTinkersThaks. But i haven't found it in official specifications of O-Pi 2W. And that is strange. For example newest RPi does NOT have hardware acceleration of H.264. I know that those SoCs are powerful enough to software decoding H.264. But what is important for me is ENERGY CONSUMPTION. And for this is better hardware acceleration. I am going to build device with battery, and there is consumption very important. I am still not sure which SBC is best for this. Low consumption in IDLE and in STANDBY mode is key ! Unfortunately most of these SBCs are significantly worse in this, compared to embeded SBCs in smartphones and tablets :-(
@PlatimaTinkers 2 ай бұрын
@@petrklic7064 yeah I think the doco is a bit aged, as it also says there is no hardware acceleration for the GPU, but there is these days - you just enable the drivers in `orangepi-config`. So I'd say it was the same marketing material / documentation from launch, but it's evolved since then. Is there a way you know of to easily test if it's doing hardware decode/encode? I'm not hugely familiar with that 2D side; testing the 3D acceleration in the GPU is easy enough for me hah.
@petrklic7064 2 ай бұрын
@@PlatimaTinkersEasy test ? Start decoding 4K 60p video and measuring energy consumption (if it will run). ps: it is sad, but i can not find any reliable newer youtube video like "make your own tablet from SBC and 7inch LCD". It looks like people are not even trying to make their own Linux/AOSP tablet.
@PlatimaTinkers 2 ай бұрын
@@petrklic7064 Oh okay good to know! Re the tablet, funny you say that as I currently have a 7" touchscreen sitting on my desk here that I'm playing with: shop.plati.ma/products/luckfox-7inch-hd-capacitive-touch-screen-lcd-1024-600-resolution-hdmi-ips-multi-point-touch Pretty damn good so far, besides literal sharp edges haha.
@firepower9966 5 ай бұрын
Sipeed Longan Pi3H is a Raspberry Pi Zero-sized board with full-sized Ethernet, USB, and HDMI ports and 2GB/4GB and optional eMMC 32Gb
@PlatimaTinkers 5 ай бұрын
OH that is super interesting looking. Also H618! Modular design too. Thanks for the info!
@lorddeus369 5 ай бұрын
Bro your internet ain't avg 1080p is almost two decades old :P
@PlatimaTinkers 5 ай бұрын
Hahah nah I am halfway through moving my AP but right now it's sitting on a metal shelf that just cripples the throughput - need to put the new mount up!
@JonitoFischer 3 ай бұрын
Lack of support for GPU drivers are a constant with chinese SBCs, you have a 4k HDMI output that's unusable from Linux. That's why people keep buying raspberry pies.
@PlatimaTinkers 3 ай бұрын
Hey yeah but it turns out it works fine - just has to be enabled from the config app as it's not enabled by default! Probably for power/benchmark results. When I do a Part 2 video I'll include that info!
@firepower9966 5 ай бұрын
Can you do a video comparing EMMC and microSDcard storage and boot pro and cons etc.
@PlatimaTinkers 5 ай бұрын
Yeah mate for sure, and good idea. Just not with this, as no eMMC :P
@firepower9966 5 ай бұрын
I have some of these in my Aliexpress cart , I like how they have many Ram options from 1GB to 4GB, thinking of using a 1GB for klipper and 4GB for running on 4K TV to get rid of youtube adds and run more apps than what LG webos has.
@PlatimaTinkers 5 ай бұрын
Hah yeah I'd say 4GB for video is the way to go. And there are instructions here for GPU support it turns out: www.reddit.com/r/OrangePI/comments/17qisxw/orange_pi_zero_2w_gpu_3d_accelerationgpu/ Not sure of the Klipper requirements sorry!
@Razor_Burn 5 ай бұрын
@@PlatimaTinkers thanks for the link as I have a reason to use mine knowing GPU works 👍
@firepower9966 5 ай бұрын
@@PlatimaTinkers Sipeed Longan Pi3H is a Raspberry Pi Zero-sized board with full-sized Ethernet, USB, and HDMI ports and 2GB/4GB and optional eMMC 32Gb, think i use this as full size port will connect to TV easier and 4G with 32GB eMMC seems like better value and specs, Still use Orange Pi zero 1GB for Klipper (Klipper runs on original RPi Zero with 512kB but better on RPi Zero 2 so orange Pi Zero 2 1GB easily meets spec)
@WillThat 5 ай бұрын
If you're in the US, I use a few Onn 4K Google TV boxes from Walmart and put SmartTube and Stremio on them. It's fantastic.
@PlatimaTinkers 5 ай бұрын
@@Razor_Burnno worries at all, I'm hanging to re-test it now when I make it back to the workshop!
Andreas Spiess
Рет қаралды 392 М.
spline
Рет қаралды 443 М.