Ordinary Differential Equations and Dynamic Systems in Simulink

No video

Ordinary Differential Equations and Dynamic Systems in Simulink

Рет қаралды 77,377

Christopher Lum

Күн бұрын

Пікірлер: 180

@ChristopherLum 4 жыл бұрын

In case it is helpful, here are all my Matlab videos in a single playlist kzfaq.info/sun/PLxdnSsBqCrrEU0dLSrTcl0-w9cVYKMTaF. Please let me know what you think in the comments. Thanks for watching!

@yuanjiexian4726 4 жыл бұрын

Thanks for your video, it inspired me a lot. Moreover, I try it in dynamic control of 2-dof manipulator, of which the dynamic model includes nonlinear functions such as sine(theta2), cosine (theta2), thetadot1, thetadot2, and so on. But the results are not very good, I am very confused about whether the Simulink can be applied to the 2-dof dynamics simulation? I am looking forward to our further communication about the Simulink I did if it is convenient for you. My email address: xianyuanjie2020@gmail.com. I really hope to receive your reply. Thank you again!

@johnnyjohn9134 4 жыл бұрын

Hello, i m begginer in matlab and i want learn ți make code in matlab and also ți learn simulink to sumulate differents schematics, for example the car engine. Do You have video for begginers?!

@WINCHOism 3 жыл бұрын

is there a way to implement a nonlinear state space equation? My professor wants us to take into consideration the nonlinearities of the system and wants us to design in state space but to be able to use the same feedback design from my linear model to a non linear model i need to have my nonlinear model in state equations i think so could i just have a nonlinear A and B , matrix ?

@panterapantera3443 4 жыл бұрын

Sir, this video is so great. It is exactly what I was looking for. Your explanations are simple and understandable. I am 23 and just started with matlab few days ago. I watched few other videos before I ran on to you, those were not as nearly as good as yours. Stuff like this is the reason why I want to learn matlab. I am definitely going to watch all of your videos. Keep up with the good work. I would really like to see more videos like this. You are master at matlab, big thanks for sharing your knowledge with us.

@ChristopherLum 4 жыл бұрын

I'm glad it was helpful. There are other similar videos on the channel please feel free to check them out. Thanks for watching

@stalinibanez210 4 жыл бұрын

This video is so easy to follow that only in a few minutes I was able to model a MDoF system of 4 masses and obtain the results of displacements for each mass. The results match perfectly with the solution obtained using the Newmark beta method. Now I will continue trying something more complex. Thank you very much. This video was very helpful.

@ChristopherLum 4 жыл бұрын

I'm glad it was helpful. There are other similar videos on the channel, please feel free to check them out and let me know what you think. Thanks for watching!

@sadiaumer949 3 жыл бұрын

Hi Stalin could you plz help me solve the following equation in Simulink: 4mu''+15cu'+3ku=12cz' How to give these variables and how to give 2nd order input in simulink

@Kay-dx8vm 4 жыл бұрын

If I were my professor, I would just play this video in my class. For a 75 mins class meeting, I still have 30 mins to answer student questions or do some more examples. This video is amazing. We covered everything you mentioned in this video but I did not really understand the relationship between transfer function and the everything else.

@ChristopherLum 4 жыл бұрын

I'm glad it was helpful thanks for watching! There are other controls videos on the channel, please check them out.

@rowellcastro2683 7 ай бұрын

AA516: Thank you for this tutorial Professor! I had only minimal exposure to simulink before this video and the previous tutorial video. Now, I am pretty confident on navigating through simulink.

@selamhendrix5252 5 жыл бұрын

The side by side comparison is very helpful. Good video to help understand how to implement simulink.

@anthonynguyen9919 Жыл бұрын

AE501 - I have only used simulink for electrical engineering coursework before, but I did not know how to use simulink for a variety of applications outside of EE. Great video as always!

@zachjuveli3894 4 жыл бұрын

You have made this incredibly practical and educational!

@ChristopherLum 4 жыл бұрын

I'm glad it was useful, thanks for watching!

@alviehaider4559 8 ай бұрын

AE 501 My emplyer uses simulink to solve complex free body diagrams and this was a good video into understanding the concept and use of it

@anthonyz2719 4 жыл бұрын

This is a great refresher on state space; I remember learning it in my controls and dynamics system course back in undergrad and didn't get a full grasp of it. However, this video clarifies it a lot on top of modelling it. Great content.

@mofukeryeah 4 жыл бұрын

that was the most interesting and helpful matLAB class with examples i've ever seen, congrats for your great job, you will help a lot of engineering students with these videos!

@ChristopherLum 4 жыл бұрын

Thanks, I'm glad it was helpful. This is one of series of videos talking about how to use Matlab and Simulink for controls engineering. Please feel free to check out the other videos and please let me know what you think in the comments. Thanks for watching!

@tadm123 2 жыл бұрын

This was the best video by far that I'd seen. I was having trouble understanding how all of these models relate to each other, especially the transfer function. Thanks my friend :)

@ChristopherLum 2 жыл бұрын

Hi, Thanks for the kind words, I'm glad you enjoyed the video. If the find the these videos to be helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. Thanks for watching! -Chris

@BeniSnow 3 жыл бұрын

AE501: Where were you during my undergrad days when I just assumed everything was linear because otherwise it became too difficult?? The demonstration of the uselessness of how keeping it linear with the small angle approximation at ~42 minutes is phenomenal.

@ChristopherLum 3 жыл бұрын

Beni, I'm glad it was enlightening. Just wait until we do some more interesting stuff with Simulink in the near future.

@elijahleonen198 10 ай бұрын

AE501: Very interesting example with the pendulum. Very helpful for ODE in Simulink!

@karlbalitaan 4 жыл бұрын

This is a helpful video to visualize the differences between a linear and non-linear model! Thanks Chris!

@Pluto4Planet2024 5 жыл бұрын

Really helpful video. It really helped my understanding of the different options available with Simulink when you modeled the same system in three different block diagrams, and showed the same output from each.

@jesusespinoza2349 4 жыл бұрын

I’m new to state space, but I think is a pretty cool tool for linear systems and simulink is just very powerful for non-linear systems.

@alisoncaprioli4861 4 жыл бұрын

Definitely going to watch this one again to make sure it sinks in.

@paulpietrowicz3683 Жыл бұрын

AE501- Ive taken many Simulink courses years ago, you make this seem way easier than when I first put these tools into the toolbox. Thanks! Now If i can model this spring pulley mass system in the HW as easy as you made it seem in Simulink...

@ChristopherLum Жыл бұрын

The HW problem is a similar situation but the equations are just a little more cumbersome but hopefully the idea is the same. Let me know if you encounter any issues with the hw.

@petermay6090 6 ай бұрын

AA516: Easy to follow, cool to see comparison between different approaches!

@lalasampritray375 4 жыл бұрын

I found everything i wanted to know about state space in matlab from ur video. Thank you.

@ChristopherLum 4 жыл бұрын

You are most welcome

@sidraman6950 5 жыл бұрын

Very easy to understand. A great resource for solving ODE's via Simulink.

@ivancordero5930 5 жыл бұрын

Great video. I love how simple it was to implement non-linear behavior

@MrMARS-yk1yv 2 жыл бұрын

thank you soooooooo much it helped a lot in my bachelor thesis. thanks once again

@matthewbajamundi8774 4 жыл бұрын

A great video to learn how to implement an ODE in Simulink.

@AJEETKUMAR-ej5st 4 жыл бұрын

This is so good video I have seen so far for simulink and working with differential equation

@ChristopherLum 4 жыл бұрын

I'm glad it was helpful. There are other similar videos on the channel, please feel free to check them out and let me know what you think. Thanks for watching!

@entropyz5242 5 жыл бұрын

Totally worth every minute. Superb video

@michaelrudolf9988 4 жыл бұрын

Including a full example definitely makes this easier to understand and follow

@everettkinyon7602 5 жыл бұрын

Shows different methods to model a system. Super useful !

@robertdelossantos1936 4 жыл бұрын

It's helpful to see this via a concrete example in terms of how to model and the like.

@LorraineB_0911 5 жыл бұрын

I really enjoyed this video. I have never implemented a state space or transfer function in Simulink so I found this video very useful. Thank you.

@melissawells8133 4 жыл бұрын

Definitely a great video to visualize these systems. Thank you!

@melissawells8133 3 жыл бұрын

Reviewed again for AE511 - Thank you!

@mikmik3965 6 ай бұрын

Great video you saved my control systems homework

@ChristopherLum 6 ай бұрын

Hi, Thanks for the kind words, I'm glad you enjoyed the video. If you find these videos helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum or via the 'Thanks' button underneath the video. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. I can also answer any questions, provide code, notes, downloads, etc. on Patreon. Thanks for watching! -Chris

@mitchellhubbard5727 5 жыл бұрын

Excellent video and the practical examples are especially helpful! Thanks!

@lienchang5599 5 жыл бұрын

I’ve always had trouble solving ODEs with Simulink especially with state space representation but this video really helped me out a lot!! -Lien

@jamesferrese2350 5 жыл бұрын

Great intro to modelling ODE's

@charlesharmon9065 4 жыл бұрын

A very effective tool for rapidly modeling ODEs. Thank you for the tutorial!

@zacharywilliams2436 5 жыл бұрын

Concise and easy to follow

@triskitman124 5 жыл бұрын

Great. This is a great way to get started building an inverted pendulum controller

@Lucianozes 5 жыл бұрын

Excellent video, sir!

@experimentalearthquakeengi3307 3 жыл бұрын

Beautifully explained

@morganwalker940 5 жыл бұрын

Wow! I feel like my friend Simulink and I got coffee together and I learned more about her and what she does! Very cool

@alexsteahr8458 4 жыл бұрын

You show some small tricks here that I didn't know about. Thanks

@cjyoo1410 4 жыл бұрын

Simulink is great at quickly solving and displaying these ODEs.

@TuanTran-fs8ll 10 ай бұрын

AE501 Tuan Tran: Thank you for a great video. This is very good intro as I never used Simulink before. Also, it is a good tool to solve for the system response numerically.

@brentpaul7650 4 жыл бұрын

first time using simulink, i love it

@jonathonlaird6279 4 жыл бұрын

Thank you for the video. Very helpful.

@devinligman 5 жыл бұрын

A great follow up to the classic ”Matlab06”!

@sajeew 4 жыл бұрын

Thank you for video, I'm still trying to figure it out how to use simulink and getting to understand little bit right now. Thanks Sam

@minaanderberg884 4 жыл бұрын

Good demonstration on using Simulink to solve ODE's

@selamhendrix5252 5 жыл бұрын

great info, the side by side comparison of the different representations is very helpful thanks.

@kristenleenerman1351 5 жыл бұрын

Great video explaining modeling ODEs in Simulink

@thomasireson1427 4 жыл бұрын

A lot of information to take in, but it was really helpful to see the system drawn out.

@manavt2000 3 жыл бұрын

please continue this series..your videos are very helpful

@kylekearsley800 5 жыл бұрын

That's a lot of new information to take in. Thanks!

@helentat6224 5 жыл бұрын

Great explanation of initial conditions of nonlinear ODEs

@kyrilloswilliam7626 3 жыл бұрын

Thank you very much for this great work

@garrettdavis4665 4 жыл бұрын

Excellent explanation

@ryoonoue1076 2 жыл бұрын

AE501. Great video and was very helpful to finish the HW 2 and hopefully HW3. I like that simulink gives you options as to how the user wants to approach the numerical calculations. Thanks for the vid!

@SScook206 4 жыл бұрын

Awesome vid thanks Chris!

@julianwoo1609 5 жыл бұрын

Good followup video on Simulink. Thanks!

@jacobcarroll3933 5 жыл бұрын

Another great tutorial on solving ODE's with simulink!

@z.saeedi9323 3 жыл бұрын

it was really great and helped me visualize all these concepts very well, I'm gonna show this to my friends too!

@HIEPNGUYEN-wb7yg 5 жыл бұрын

Practical examples are very helpful. Thanks.

@wes1588 5 жыл бұрын

Good simulink video.

@abdullahaldaour3526 5 жыл бұрын

Realy helpfull♥️♥️

@ChristopherLum 5 жыл бұрын

I'm glad it was useful, thanks for watching!

@marcellodesario519 5 жыл бұрын

Thanks for the video, I really enjoy the practicality of Simulink!

@takudzwamashamba7453 2 жыл бұрын

bro! God bless you!

@stardust6773 3 жыл бұрын

Very helpful, thank you!

@mitchellnakaki7900 4 жыл бұрын

wow simulink is clearly very powerful when considering non-linear systems!

@jasondorn3514 4 жыл бұрын

Thanks for the video!

@veekashpatel953 5 жыл бұрын

Good examples. Easy to follow.

@jasonwhyte4162 4 жыл бұрын

Great video!

@joshuagrosserhode3417 5 жыл бұрын

Thank you for these tutorials, they are very helpful!

@Ser3naaaa 5 жыл бұрын

I wish I could add 1000 likes to this video!

@ChristopherLum 5 жыл бұрын

I'm glad it was helpful thanks for watching!

@krystoflis7157 5 жыл бұрын

Great Video Chris! Thank you

@bryanmasserang5190 5 жыл бұрын

Enjoying Simulink so far

@joewalker5753 4 жыл бұрын

Very helpful!

@alihafezikia 3 жыл бұрын

Thank you so much for this perfect tutorial.

@Thun-Nun 3 ай бұрын

May Allah reward you

@masontelander3847 4 жыл бұрын

Great video

@derekwflett 4 жыл бұрын

Great video.

@trevorubrown 4 жыл бұрын

what a great video.

@carterkraus2815 5 жыл бұрын

Very nice video, love the various ways of implementing the model

@alanlee4326 5 жыл бұрын

AE511 - Great example used comparing linear/nonlinear behavior.

@kenrickchan1165 5 жыл бұрын

Looking forward to working more with Simulink

@ryancazin5930 5 жыл бұрын

Great explanation to modeling these systems, very helpful!

@srinivasana5249 4 жыл бұрын

The video is presented in a very lucid manner, aiding clear understanding from the learner point of view. I am presently having difficulty in solving a system of ODE equations that are HIGHLY COUPLED and NONLINEAR with transcendental terms. Kindly suggest me link(s) of your YT videos or any other good resource for the same. I earnestly expect your response. Thanks.